Advertisement

Effect of Some Parameters on the Elastoplastic Behavior of Green Sand

  • R. Ami Saada
Part of the Solid Mechanics and Its Applications book series (SMIA, volume 114)

Abstract

The behavior of the casting sands at high temperatures (up to 600°C) is experimentally presented. Based on a parametric study, the predictions are well discussed and compared with the experimental results. Triaxial compression tests at different temperatures (20 to 600 °C) were performed in foundry sand (Ami Saada et al., 1996, Ami Saada 1997, Ami Saada et al, 1999). They have shown that the material strength is governed by the presence of bentonite and water. For the green sand at the temperature range from 20 to 300°C, Three elastoplastic models are considered in this study. Especially, the effects of some parameters on the mechanical behavior of the casting sands are investigated, such as preconsolidation pressure P P0 .

Keywords

Thermal consolidation Thermoelastoplasticity Green sand Core sand Casting process Triaxial compression tests Uniaxial compression tests. 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. Alexandre P. et al, Proc. of the 7 th Eng. Found., Davos, pp. 30–38, (1990),Google Scholar
  2. Ami Saada R., High temperature behavior of core sands: Experimental contribution; Proc. of Plasticity ’97, The Sixth International Symposium on Plasticity, Juneau (USA), 291–292, July, 1997.Google Scholar
  3. Ami Saada R., Bonnet G., Thermomechanical Behavior of Core Sands Under Triaxial Sollicitations, The Seventh International Symposium on Plasticity, Cancun, 537–540, January, 1999.Google Scholar
  4. Ami Saada R., Bonnet G, Bouvard D., Thermomecanical Behavior of Casting Sands: Experiments and Elastoplastic Modeling,. Int. J. of Plasticity 12, N 3, 273–294, 1996.CrossRefGoogle Scholar
  5. Bellet M., & Chenot, J.L., Comp. Mec. Pub. & Els. Ap. Sci., Chap. 13, pp. 287–316, (1993).Google Scholar
  6. Hujeux J.C., Calcul Numerique de Problemes de Consolidations Elastoplastiques, These de Docteur Ingénieur, Ecole Centrale Paris, 1979.Google Scholar
  7. Ota H. et al., Foundryman, Vol. 82, N° 6, pp. 278–283, (1989).Google Scholar
  8. Roscoe K.H., Schofield A., and Wroth C, On the Yielding Of Soils, Geotechnique, 9, 22–53, 1968.Google Scholar
  9. Williams D.C., What can the foundryman do to control the Shear Strength of Squeeze Molded Sands Mixtures 2 -Not Much, Transaction of A.F.S., pp. 80–86, 1967Google Scholar

Copyright information

© Springer Science+Business Media Dordrecht 2004

Authors and Affiliations

  • R. Ami Saada
    • 1
  1. 1.Laboratoire de Mécanique (LaM)Université de Marne La ValléeMarne La vallée cedex 2France

Personalised recommendations