Abstract
Numerical simulations of mechanical phenomena using the Finite Element approach are extensively used in industry. On one hand, the FE models manipulated are evolving toward a high complexity in terms of size (number on FE elements in the model) and phenomena addressed (non linear behaviour laws, time dependent simulations, ...). On the other hand, design methodologies are evolving towards computer supported collaborative work. The paper proposes a concept of a visualization model for the analysis and collaborative work around FE simulations results. The model presented takes into account the configurations and the equipment characterizing the use of these results and is based on a decimation technique to reduce the size of the FE model. To compress the model even further, it is covered with textures generated from the FE solution. In order to generate this visualization model in a transparent manner for the analyst, automatic partitioning methods have been set up. The compactness of the model is addressed using a multi-resolution approach on user-defined threshold values to extract the most significant part of the simulation results.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
H. HOPPE, Progressive Meshes, Computer Graphics, SIGGRAPH’96, pp 99–108, 1996.
R. KLEIN, G. LIEBICH AND W. STRABER. Mesh reduction with error control, IEEE Visualization’96 Proceedings, pp 311–318, 1996.
A. GUÉZIEC. Surface simplification inside a tolerance volume, Technical report RC 20440, IBM Research Division, T J Watson Research Center, New York, USA, Mat, 1996.
P. VÉRON, J-C LÉON, Static polyhedron simplification using error measurements, CAD, 29(4), pp 287–298, 1997.
P. VÉRON, J-C. LÉON. Shape Preserving Polyhedral Simplification with Bounded Error, Computers & Graphics, 22(5), pp 565–585, 1998.
E. PUPPO, R. SCOPIGNO. Simplification, LOD and Multiresolution — Principles and Applications, Eurographics’97 Tutorial Notes PS97 TN4, Eurographics association, 1997.
P. V. SANDER, J, SNYDER, S. J. GORTIER, H. HOPPE. Texture mapping progressive Meshes, Computer Graphics Proceedings, ACM SIGGRAPH, 2001.
J-C. LÉON, L. FINE, X. ROGOVITZ, L. GRAUX. A Design Review environment for Complex Products, CSCWD99 Conference, University of Compiègne, Compiègne, 28–30 September, 1999.
L. FINE, J-C. LÉON, X. ROGOVITZ. Viewer de déformées modales, MICAD 2000 Conference, Paris, March, 2000.
P. SCHRÖDER, W. SWELDENS. Spherical Wavelets. Efficiently Representing Functions on the Sphere, Computer Graphics Proceedings, ACM SIGGRAPH, pp. 161–172, Aug. 1995.
G.P. BONNEAU. Multiresolution Analysis on Irregular Surface Meshes, IEEE Transactions on Visualization and Computer Graphics, 4(4), pp. 365–378, 1998.
G.P. BONNEAU, A. GERUSSI. Level of Detail Visualization of Scalar Data Sets on Irregular Surface Meshes, IEEE Visualization’98 Proceedings, pp. 73–77, Oct. 1998.
G.P. BONNEAU, A. GERUSSI. Analysis of Scalar Datasets on Multi-Resolution Geometric Models, in Curve and Surface Fitting: Saint-Malo 1999, A. Cohen, C. Rabut, and L.L. Schumaker (eds.), Vanderbilt University Press., Nashville, pp. 209–218, 2000.
L. FINE, L. RÉMONDINI, J-C. LÉON. Automated Generation of FEA models through idealization operators, Int. Journal For Num. Methods In Eng., 49(1–2), pp 83–108, 2000.
P. VÉRON, J-C. LìON. Using polyhedral models to automatically sketch idealized geometry for structural analysis, to appear in Engineering with computers, 2001.
M. SOUCY, G. GODIN, M. RIOUX. A Texture-Mapping Approach for the Compression of Colored 3D Triangulations, The Visual Computer, 12, pp 503–514, 1996.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2003 Springer Science+Business Media Dordrecht
About this chapter
Cite this chapter
Lovinfosse, D., Fine, L., Léon, JC., Rogovitz, X., Truong-Trung, T. (2003). A Collaborative Tool for the Visualization of Scientific Simulation Results. In: Gogu, G., Coutellier, D., Chedmail, P., Ray, P. (eds) Recent Advances in Integrated Design and Manufacturing in Mechanical Engineering. Springer, Dordrecht. https://doi.org/10.1007/978-94-017-0161-7_34
Download citation
DOI: https://doi.org/10.1007/978-94-017-0161-7_34
Publisher Name: Springer, Dordrecht
Print ISBN: 978-90-481-6236-9
Online ISBN: 978-94-017-0161-7
eBook Packages: Springer Book Archive