Abstract
This lecture considers flow fields, friction factors, and local and average heat transfer coefficients in rib-roughened ducts for applications in compact heat exchangers and cooling systems in gas turbine systems. Details of the flow pattern and the influence of rib configuration, rib angle, rib pitch and height are discussed, and physical interpretations of the results are provided.
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Webb, R.L. (1994) Principles of Enhanced Heat Transfer Wiley-Interscience, New York.
Han, J.C., Glicksman, L.R. and Rohsenow, W.M. (1978) An investigation of heat transfer and friction for rib-roughened surfaces, Int. J. Heat Mass Transfer, 21, 1143–1156.
Arman, B. and Rabas, T.J. (1992) Disruption shape effects on the performance of enhanced tubes with the separation and reattachment mechanism, ASME HTD-Vol. 202, 67–75, ASME, New York.
Liou, T.M. and Hwang, J.J. (1993) Effect of ridge shapes on turbulent heat transfer and friction in a rectangular channel, Int. J. Heat Mass Transfer, 36, 931–940.
Metzger, D.E., Fan, C.S. and Yu, Y. (1990) Effects of rib angle and orientation on local heat transfer in square channels with angled roughness ribs, in R.K. Shah. A.D. Kraus and D.E. Metzger, Compact Heat Exchangers, Hemisphere Publishing Corporation, New York, pp. 151–167.
Han, J.C., Zhang, Y.M. and Lee, C.P. (1991) Augmented heat transfer in square channels with parallel, crossed and V-shaped angled ribs, ASME J. Heat Transfer, 113, 590–596.
Han, J.C., Zhang, Y.M. and Lee, C.P. (1992) High performance heat transfer ducts with parallel broken and V-shaped broken ribs, Int. J. Heat Mass Transfer, 35, 513–523.
Zhang, Y.M., Gu, W.Z. and Han, J.C. (1994) Heat transfer and friction in rectangular channels with ribbed or ribbed-grooved walls, ASME J. Heat Transfer, 116, 58–65.
Hwang, J.J. and Liou, T.M. (1995) Heat Transfer and friction in a low aspect ratio rectangular channel with staggered perforated ribs on two opposite walls, ASME J. Heat Transfer, 117, 843–850.
Hwang, J.J. and Liou, T.M. (1995) Heat transfer and friction in a rectangular channel with perforated turbulence promotors using holographic interferometry measurement, Int. J. Heat Mass Transfer, 38, 3197–3208.
Liou, T.M. Wang, W.B. and Chang, Y.J. (1995) Holographic interferometry study of spatially periodic heat transfer in a channel with ribs detached from one wall, ASME J. Heat Transfer, 117, 32–39.
Taslim, M.E., Li, T. and Kercher, D.M. (1996) Experimental heat transfer and friction in channels roughened with angled, V-shaped and discrete ribs on two opposite walls, ASME J. Turbomachinery, 118, 20–28.
Liou, T.M., Wu, Y.Y. and Chang, Y. 1(1993) LDV measurements of periodic fully developed main and secondary flows in a channel with rib-disturbed walls, ASME J. Fluids Engineering, 115, 109–114.
Hirota, M., Fujita, H. and Yokosawa, H. (1994) Experimental study on convective heat transfer for turbulent flow in a square duct with a ribbed rough wall (characteristics of mean temperature field), ASME J. Heat Transfer, 116, 332–340.
Farell, P., Wert, K. and Webb, R.L. (1991) Heat transfer and friction characteristics of turbulator radiator tubes, SAE Paper 910197, SAE Transactions, 100, 218–230.
Olsson, C.O. and Sundén, B. (1996) Heat transfer and pressure drop characteristics of ten radiator tubes, Int. J. Heat Mass Transfer, 39, 3211–3220.
Han, J.C. (1988) Heat transfer and friction characteristics in rectangular channels with rib turbulators, ASME J. Heat Transfer, 110, 321–328.
Olsson, C.O. and Sundén, B. (1997) Fluid flow and heat transfer in rib-roughened tubes, in M. Giot et al. (eds.), Experimental Heat Transfer, Fluid Mechanics and Thermodynamics1997, Edizioni ETS, Pisa, Vol. 3, pp. 1655–1662.
Olsson, C.O. and Sundén, B. (1998) Experimental study of fluid flow and heat transfer in rib-roughened channels, Experimental Thermal and Fluid Science, 16, 349–365.
Olsson, C.O. and Sundén, B. (1998) Thermal and hydraulic performance of a rectangular tube with multiple V-shaped ribs, ASME J. Heat Transfer, accepted for publication.
Fodemski, T.R. and Collins, M.W. (1988) Flow and heat transfer simulations for two- and threedimensional smooth and ribbed channels, in Proceedings of the 2 nd UK National Conference on Heat Transfer, ImechE, London, UK, Vol. 1, pp. 845–860.
Acharya, S., Dutta, S., Myrum, T.A. and Baker, R.S. (1993) Periodically developed flow and heat transfer in a ribbed duct, lnt. J. Heat Mass Transfer, 36, 2069–2082.
Chang, B.H. and Mills, A.F. (1993) Turbulent flow in a channel with transverse rib heat transfer augmentation, Int. J. Heat Mass Transfer, 36, 1459–1469.
Arman, B. and Rabas, T.J. (1994) Two-layer model predictions of heat transfer inside enhanced tubes, Numerical Heat Transfer A, 25, 721–724.
Fusegi, T. (1995) Turbulent flow calculations of mixed convection in a periodically-ribbed channel, J. Enhanced Heat Transfer, 2, 295–305.
Iacovides, H. and Raisee, M. (1997) Computation of flow and heat transfer in 2-D rib-roughened passages, in K. Hanjalic and T.W.J. Peters (eds.), Int. Symposium on Turbulence, Heat and Mass Transfer.
Abdon, A. and Sundén, B. (1998) Investigation of a turbulence model for wall cooling of combustion chambers, ASME Paper 98-GT-540.
Han, J.C., Glicksman, L.R. and Rohsenow, W.M. (1979) Correction to an investigation of heat transfer and friction for rib-roughened surfaces, Int. J. Heat Mass Transfer, 22, 1587–1588.
Saidi, A. and Sundén, B. (1998) Calculation of convective heat transfer in square-sectioned gas turbine blade cooling channels, ASME Paper 98-GT 204.
Cunha, F.J. (1992) Turbulent flow and heat transfer in gas turbine blade cooling passages, ASME Paper 92-GT-239.
Youn, B., Yuen, C. and Mills, A.F. (1994) Friction factor for flow in rectangular ducts with one side ribroughened, ASME J Fluids Engineering, 116, 488–493.
Abdon, A. and Sundén, B. (1998) A numerical method to calculate the cooling performance of a ribroughene d duct, in A.J. Nowak et al. (eds.), Advanced Computation al Methods in He at Transfer V, Computational Mechanics Publications, Southampton, pp. 381–391.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1999 Springer Science+Business Media Dordrecht
About this chapter
Cite this chapter
Sundén, B. (1999). Heat Transfer and Fluid Flow in Rib-Roughened Rectangular Ducts. In: Kakaç, S., Bergles, A.E., Mayinger, F., Yüncü, H. (eds) Heat Transfer Enhancement of Heat Exchangers. Nato ASI Series, vol 355. Springer, Dordrecht. https://doi.org/10.1007/978-94-015-9159-1_8
Download citation
DOI: https://doi.org/10.1007/978-94-015-9159-1_8
Publisher Name: Springer, Dordrecht
Print ISBN: 978-90-481-5190-5
Online ISBN: 978-94-015-9159-1
eBook Packages: Springer Book Archive