Advertisement

System design and worked examples

  • G. E. Klinzing
  • R. D. Marcus
  • F. Rizk
  • L. S. Leung
Chapter
Part of the Powder Technology Series book series (POTS, volume 8)

Abstract

In an attempt to illustrate the various concepts discussed in the preceding chapters, a number of worked examples relating to pneumatic conveying systems will be presented in this chapter. Where possible each example has been structured so as to illustrate a number of facets of the theory, whilst an attempt has also be made to design each problem so that it relates to practical pneumatic conveying problems.

Keywords

Pressure Drop Pressure Loss Froude Number Settling Velocity Pipe Diameter 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Stephenson, R.L. and Nixon, H.E. (1983) Centrifugal Compressor Engineering, Hoffman Air and Filtration Division, Clarkson Industries Inc., New York.Google Scholar
  2. 2.
    Weber, M. (1973) Stromung-Fordertechnik, Krausskopf Verlag.Google Scholar
  3. 3.
    Butters, G. (ed.) (1981) Plastics Pneumatic Conveying and Bulk Storage, Applied Sciences Publishers, Reading.Google Scholar
  4. 4.
    Hinkle, B.L. (1953) Ph.D. Thesis, Georgia Institute of Technology.Google Scholar
  5. 5.
    Pettyjohn, E.S. and Christiansen, E.E. (1948) Chem. Eng. Progr., 44, 157.Google Scholar
  6. 6.
    Reed, A.R. (1990) Powder and Bulk Engineering, 4, No. 3, 35–6.Google Scholar
  7. 7.
    Hayes, J. and Reed, A.R. (1993) 7th Intl. Freight Pipeline Soc. Symposium, Wollongong, Australia, March.Google Scholar
  8. 8.
    Solt, P. (personal communication)Google Scholar
  9. 9.
    Chambers, A.J., Sreegiriaju, V.N. and Keys, S. (1993) Repowflowii, Oslo, Norway.Google Scholar
  10. 10.
    Weber, M. (1982) Bulk Solids Handling, 2, 231–3.Google Scholar
  11. 11.
    Hoppe, H. (1995) Proceedings of the 8th International Freight Pipeline Society Symposium, University of Pittsburgh, Pittsburgh, PA, 69–74.Google Scholar
  12. 12.
    Yang, W.-C. (1982) Pneumateck I, Stratford-on-Avon, Powder Advisory Centre, London.Google Scholar

Copyright information

© G.E. Klinzing, R.D. Marcus and F. Rizk 1997

Authors and Affiliations

  • G. E. Klinzing
    • 1
  • R. D. Marcus
    • 2
    • 3
  • F. Rizk
    • 4
  • L. S. Leung
    • 5
  1. 1.Chemical EngineeringUniversity of PittsburghUSA
  2. 2.Morgan Education Technologies (Pty) LtdSouth Africa
  3. 3.Key Centre for Bulk Solids and Particulate TechnologiesUniversity of NewcastleAustralia
  4. 4.Technical Research and Development DepartmentBASF-AktiengesellschaftLudwigshafenGermany
  5. 5.Commonwealth Scientific and Industrial Research OrganizationAustralia

Personalised recommendations