Abstract
The fundamentals of high temperature oxidation and corrosion of metals and alloys are discussed on thermodynamic, kinetic and morphological points of view. Special attention is paid to the compacity of corrosion scales, the nature of the diffusing defects and the location of the slow process(es). The influence of gases other than oxygen and alloying additions are described. In a second part, the effects of high energy beams are presented and the location of their influence is discussed. Major or minor modifications are described, leading to enhancement or inhibition of the corrosion rate. The use of high energy beams as corrosion protection tools is envisaged.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Kofstad Per, High Temperature Corrosion, Elsevier, London (1988).
Birks N. and Meier G.H., Introduction to High Temperature Oxidation of Metals, Edward Arnold, London (1983).
Oxidation of Metals and Alloys, ASM Metals Park, Ohio (1971).
Bénard J., L’oxydation des Métaux, Gauthier-Villars, Paris (1964).
Sarrazin P. and Besson J., Cinétique d’oxydation du magnésium dans l’oxygène sec entre 350 et 450 °C. Influence de la pression, Rev. Met. VI-1, 11 (1966).
Loriers J., Loi d’oxydation du cérium métallique. Généralisation à d’autres métaux, C.R. Acad. Sci. Paris 231, 522 (1950).
Sarrazin P., Influence de la pression gazeuse sur la cinétique des réactions gaz-métal, Thèse, Grenoble, France (1968).
Deal B.E. and Grove A.S., General relation for the thermal oxidation of silicon, J. Appl. Phys. 36, 3770 (1965).
Chaze A.M., Coddet C. and Béranger G., Oxidation of titanium in oxygen atmospheres, personal communication (1994).
De Nicola M.R., Influence de la vapeur d’eau sur l’oxydation à haute température des métaux, Thèse, Institut National Polytechnique de Grenoble, France (1993).
Galerie A., De Nicola M.R. and Petit J.P., “Photoelectrochemical studies of the thermal oxidation of titanium in O2O, H2O or O2/H2O atmospheres”, in S.B. Newcomb and M.J. Bennett (eds.), Microscopy of Oxidation, The Institute of Materials, p. 338 (1993).
Whittle D.P. and Stringer J., Improvements in high temperature oxidation resistance by additions of reactive elements or oxide dispersions, Phil. Trans. Royal Soc. (London) A295, 309 (1980).
Stott F.H., Bartlett P.K.N. and Wood G.C., The influence of laser surface treatment on the high temperature oxidation of Or2O3-form ing alloys, Mat. Sci. Eng. 88, 163 (1987).
Stokes P.N.S., Stott F.H. and Wood G.C., The influence of laser surface treatment on the high temperature oxidation of Cr2O3-forming alloys, Mat. Sci. Eng., A121, 549 (1989).
Galerie A., Pons M. and Caillet M., Surface modification using lasers and ion beams, Mater. Sci. Technol. 5, 806 (1989).
Beauvais-Réveillon S., Oxydation d’un dépôt de chrome sur divers substrats, commercial ou de laboratoire. Comparaison des mécanismes d’oxydation, en four ou assistée par un laser CO2 continu à température constante, Thèse, University of Paris XI — Orsay (1994).
Dao-Duong H., Galerie A., Pons M., Sarrazin P. and Caillet M., Influence de l’implantation ionique de bore sur le comportement du fer à chaud en atmosphère de dioxyde de souffre, Mem. Et. Sci. Rev. Met., July–Aug., p. 463 (1991).
Pons M., Galerie A., Caillet M. and Gawel J., “Thermal oxidation of Ni and Cr-bearing surface alloys achieved on steel by laser processing”, in Innovation and Technology Transfer for Corrosion Control, Associazione Italiana di Metallurgia, Milano p. 4 (1990),.
Pons M., Galerie A. and Caillet M., High temperature oxidation of Bi-implanted iron, Corr. Sci. 23, 1191 (1983).
Pons M., Caillet M. and Galerie A., Comportement en atmosphère oxydante du cuivre traité par implantation ionique, Ann. Chim. Fr. 9, 567 (1984).
Pons M., Galerie A. and Caillet M., A comparison between ion implantation and laser alloying of pure iron for oxidation resistance improvement. Boron alloying, J. Mat. Sci. 21, 2697 (1986).
Pons M., Caillet M. and Galerie A., A comparison between ion implantation and laser alloying of pure iron for oxidation resistance improvement. Aluminium alloying, J. Mat. Sci. 21, 4101 (1986).
Roy S.K., Fasasi A., Pons M., Galerie A., Caillet M., “High temperature oxidation behaviour of laser surface alloyed iron-silicon coatings on iron”, in R. Streiff, J. Stringer, R.C. Krutenat and M. Caillet (eds.), Proceedings 3rd Int. Symp. High Temperature Corrosion (Les Embiez, France, May 25-29 1992), Les Editions de Physique, Paris, p. 625 (1993).
Skalli A., Galerie A. and Caillet M., Protection of low alloy steel against thermal oxidation or sulphidation by superficial pack or laser aluminisation, Mater. Sci. Technol. 5, 853 (1989).
Fasasi A.Y., Roy S.K., Galerie A., Pons M. and Caillet M., Laser surface alloying of Ti-6A1-4V with silicon for improved hardness and high temperature oxidation resistance, Materials Letters 13, 204 (1992).
Fasasi A.Y., Roy S.K., Galerie A., Pons M. and Caillet M., “Development of protective coatings on Ti-6A1-4V by laser surface alloying”, in P.K. Datta and J.S. Gray (eds.), Surface Engineering, Royal Society of Chemistry, Cambridge, p. 56 (1993).
Galerie A., Dao Duong H., Nguyen Khac C., Pons M. and Caillet M., The behaviour in SO2 at high temperatures of Fe-B coatings on Fe obtained by ion beam, laser or pack cementation techniques, Corr. Sci. 35, 1073 (1993).
Pierraggi B. and Rapp R.A., Chromia scale growth in alloy oxidation and the reactive element effect, J. Electrochem. Soc. 140, 2844 (1993).
Wagner C., Theory of the tarnishing process, Z. Phys. Chem. B21, 25 (1933).
Wagner C., Equations for transport in solid oxides and sulfides of transition metals, Prog. Solid State Chem. 10, 3 (1975).
Wagner C., Reaction types in the oxidation of alloys, Z. Elektrochem. 63, 772 (1959).
Wagner C., Theoretical analysis of the diffusion processes determining the oxidation rate of alloys, J. Electrochem. Soc. 99, 369 (1952).
Wagner C., Oxidation of alloys involving noble metals, ibid. 103, 571 (1956).
Smeltzer W.W. and Whittle D.P., The criterion for the onset of internal oxidation beneath the external scales on binary alloys, ibid. 125, 1116 (1978).
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1995 Springer Science+Business Media Dordrecht
About this chapter
Cite this chapter
Galerie, A. (1995). High Temperature Oxidation and Corrosion of Metals and Alloys: Fundamentals and Influence of High Energy Beams. In: Misaelides, P. (eds) Application of Particle and Laser Beams in Materials Technology. NATO ASI Series, vol 283. Springer, Dordrecht. https://doi.org/10.1007/978-94-015-8459-3_5
Download citation
DOI: https://doi.org/10.1007/978-94-015-8459-3_5
Publisher Name: Springer, Dordrecht
Print ISBN: 978-90-481-4510-2
Online ISBN: 978-94-015-8459-3
eBook Packages: Springer Book Archive