Abstract
On the basis of our analysis of a transient thermal stress problem of a thin circular disk, which is locally heated at an arbitrary eccentric position, infuences on thermal stresses and stress intensity factors in the thermal shock testing condition of the disk specimens are discussed. Then measuring methods of the thermal shock resistance and the thermal shock fracture toughness by arc discharge heating are explained. These methods are applied to several kinds of graphite and C/C-composite as the first wall materials in fusion reactor devices. These results are compared with preliminary observations of the plasma-facing first wall tiles for a fusion reactor device JT-60.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Sato, S., Sato, K., Imamura, Y. and Kon, J., (1975), Determination of the thermal shock resistance of graphite by arc discharge heating, Carbon, 13, 309.
Sato,S., Awaji,H. and Akuzawa,H., (1978), Evaluation of the thermal shock fracture toughness of reactor graphite by arc discharge heating, Carbon, 16, 103.
Sato, S., I shida, R. and Chida, M., (1986), Influences of surface heat transfer in thermal stresses due to local heating in disk — Application to thermal shock resistance test of graphite, Proc. Japan Soc. of Mech. Engg., Hitachi, 4–6.
Sato, S., Awaj i, H., Ishida, R., Kurumada, A. and Chida, M., (1987), Influences of surface heat transfer on the thermal shock fracture tonghness of disk with an edge slit, Proc. JSME (Hitachi), 13–15.
Sato, S., Awaj i, H., Kawamata, K. and Kon, J., (1979), Resistance and fracture toughness against thermal shock of several varieties of graphite, Proc. 22nd Japan Congress on Material Research, Soc. Material Sci., Japan, 64–69.
Sato, S., Awaj i, H., Imamura, Y., Kawamata, K. and Oku, T., (1980), Determination of the thermal shock fracture toughness of reactor graphite subjected to neutron irradiation at high temperature, D. P.H.Hasselman & R. A. Heller ed., Thermal Stresses in Severe Environments, Plenum Press, 535–552.
Sato, S., Kawamata, K., Awaj i, H., Osawa, M. and Manaka, M., (1981), Thermal shock resistance and fracture toughness of carbons during the graphitization process, Carbon, 19, 111–118.
Sato, S., I sihara, M., Kiyono, M. and Inoue, Y., (1982), Thermal shock resistance and fracture toughness of graphite with different arrangements of coke grain size, Inter.Symp.on Carbon, Toyohashi, 272–275.
Sato, S., Imamura, Y., Kawamata, K., Awaj i, H. and Oku, T., (1981), Irradiation effects on thermal shock resistance and fracture toughness of HTGR graphite, Nucl. Engg. and Design, 61, 383–398.
Sato, S., Tobita,K. and Kurata,K., (1982), Thermal shock resistances and fracture toughnesses of SiC and B4C at high temperature, J. Faculty of Eng., Ibaraki Univ., 30, 19–26.
Riney,T., (1961), J. Appl. Mech., ASTE, 28, 631.
Sato, S., et al.,J.Faculty of Engg.,Ibaraki University, in preparation.
Tweed, J. and Rooke,D.P., (1973), The stress intensity factor of an edge crack in a finite elastic disk, Int. J. Engg. Sci., 11, 65–73.
Rooke,D.P. and Tweed, J., (1973), The stress intensity factor of an edge crack in a finite rotating elastic disk, Int. J. Engg. Sci., 11, 279–283.
Hasselman,D.P.H., (1963), Elastic energy at fracture and surface energy as design criteria for thermal shock, J. Am. Ceram. Soc., 46, 535–540.
Hasselman,D.P.H., (1969), Unified theory of thermal shock fracture initiation and crack propagation in brittle ceramics, J. Am. Ceram. Soc., 52, 600–604.
Ando,T.,et al.,(1992),Screening tests of isotropic graphites and C/ C composites for JT-60U plasma facing components,Tanso,152.120–127.
Sato, S., Awaj i, H., Kawamata, K., Kurumada, A., Oku, T., Ugachi, H. and Ishida,R., (1987), Degradations of thermal shock resistance and fracture toughness of neutron irradiated reactor graphite, J. Nucl. Sci. Tech., 24, 547.
Kelly, B. T., (1981). Physics of graphite, Elsevier, London, 50.
Sato, S., Kurumada, A., Kawamata, K., Takizawa, T. and Teruyama, K., (1989), Neutron irradiation effects on thermal shock resistance and fracture toughness of graphites as plasma-facing first wall components for fusion reactor devices, Carbon, 27, 507–516.
Sato, S., Kurumada, A., Kawamata, K. and I shida, R, (1990), Thermal shock resistances and fracture toughnesses of graphites and C/C-composites as plasma-facing first wall components for fusion reactor devices, Fusion Engg. and Design, 13, 159–176.
Sato, S., Kurumada, A., Kawamata, K., Okuyama, Y. and I soo, N., (1986), Thermal shock fractures of Mg0-C brick for steel manufacturing furnaces, J. Faculty of Engg., Ibaraki University, 34, 135–142.
Sato, S., Kurumada, A., Kudo, Y., Suzuki, T., I tagaki, S. and Mitani, S., (1989). Thermal shock fractures of coke for blast furnaces at high temperature, 19th Biennial Conf. Carbon, 488–489.
Sato, S.,Kurumada, A., Kudo, Y., Chikahata, H., Shibano, M. and Miyata, H., (1989), Evaluations of thermal shock resistances of SiC for gas turbine blade at high temperature, J. Faculty of Engg., Ibaraki University, 37, 105–112.
Sato, S., Endo, F., Kurumada, A., Kawamata, K., Hiroki, N., and Miki, T., (1991), Thermal shock fractures of Mg0-C brick for steel manufacturing furnaces, Pro. JSME (Hitachi), 1–3.
Sato, S., Saito, H., Kurumada, A., Endo, F., Kim, Y. H. and Hayamizu, K., (1992), Thermal shock resistances of immersion nozzles for continuous steel casting, Pro. JSME (Hitachi), 4–6.
Sato, S., Kurumada, A., Kawamata, K., Suzuki, N., Kaneko, M. and Fukuda, K., (1992), Thermal stress resistances and neutron irradiation effects of fuel compact for HTTR, J. Atomic Energy Soc. of Japan, 34, 266–276.
H.Awaji and J.Kon, (1988), Thermal shock strength and thermal shock fracture toughness, Proc. Annual Meeting of Japan Ceram. Soc., p. 415.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1993 Springer Science+Business Media Dordrecht
About this chapter
Cite this chapter
Sato, S., Imamura, Y., Kurumada, A., Kawamata, K., Ishida, R., Awaji, H. (1993). Evaluations of the Thermal Shock Resistances and Fracture Toughnesses of Graphite and C/C Composites by Arc Discharge Heating. In: Schneider, G.A., Petzow, G. (eds) Thermal Shock and Thermal Fatigue Behavior of Advanced Ceramics. NATO ASI Series, vol 241. Springer, Dordrecht. https://doi.org/10.1007/978-94-015-8200-1_21
Download citation
DOI: https://doi.org/10.1007/978-94-015-8200-1_21
Publisher Name: Springer, Dordrecht
Print ISBN: 978-90-481-4291-0
Online ISBN: 978-94-015-8200-1
eBook Packages: Springer Book Archive