Abstract
Pulp and paper industries are capital intensive and benefit from economies of scale. The vast majority of paper products are made from cellulose fibres, the aggregate of fibres being known as pulps. Chemical pulp mills typically operate at tonnages of 1000 tonnes per day, while a modern newsprint machine will produce 600 tonnes per day.
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Almberg, L., Croon, I. and Jamieson, A. (1979) Oxygen delignifkation as part of future mill systems. TAPPI, 62 (6), 33–5.
Atack, D. (1972) On the characterization of pressurized refiner mechanical pulps. Svensk Papperstidn, 75 (3), 89–94.
Barnet, A.J. and Vihmari, P. (1983) OPCO process pilot plant. Pulp Pap. Can., 84 (9), 52–5 (T215–18).
Bristow, J.A. and Kolseth, P. (1986) Paper: Structure and Properties, Marcel Dekker, New York.
Bublitz, W.J. (1980) Pulpwood, in Pulp and Paper: Chemistry and Chemical Technology, 3rd edn (ed. J.P. Casey), Wiley-Interscience, New York, pp. 113–59.
Cameron, D.W., Farrington, A., Nelson, P.F., Raverty, W.D., Samuel, E.L. and Vanderhoek, N. (1982) The effect of addition of quinonoid and hydroquinonoid derivatives in NSSC pulping. APPITA, 35 (4), 307–15.
Casey, J.P. (ed.) (1980) Pulp and Paper: Chemistry and Chemical Technology, 3rd edn, Wiley-Interscience, New York.
Corson, S.R. (1980) Fibre and fine fractions influence strength of TMP. Pulp Pap. Can., 81 (5), 69–76 (T108–12).
Dillner, B. (1989) Modified continuous cooking. Japan Pulp Pap. J., 26 (4), 49–55.
Espenmiller, H.P. (1969) The theory and practice of refining. Southern Pulp Paper Mfr, 32 (4), 50–7.
FAO (1991) FAO Yearbook: Forest Products 1989. FAO, For. Series No. 24, FAO, Rome.
Fengel, D. and Wegener, G. (1984) Wood: Chemistry, Ultrastructure, Reactions, De Gruyter, Berlin.
Gierer, J. (1980) Chemical aspects of kraft pulping. Wood Sci. Technol., 14 (4), 241–66.
Hänninen, E. and Ahonen, A. (1986) Utilization of energy excess of pulp mills. 22nd EUCEPA Conf., Florence, Development and Trends in the Science and Technology of Pulp and Paper Making, Vol. 2 paper 40, pp. 1–19.
Hartler, N. (1962) [Penetration and diffusion in sulphate cooking (in Swedish)]. Pap.Puu, 44 (7), 365–74.
Hartler, N. and Stade, Y. 1977. Chipper operation for improved chip quality. Svensk Papperstidn, 80 (14), 447–53.
Johansson, B., Mjoberg, J. Sandstrom, P. and Teder, A. (1984) Modified continuous kraft pulping — now a reality. Svensk Papperstidn, 87 (10), 30–5.
Kerr, A.J. and Uprichard, J.M. (1976) The kinetics of kraft pulping: refinement of a mathematical model. APPITA, 30 (1), 48–54.
Kibblewhite, R.P. (1984) Web formation, consolidation and water removal and their relationships with fibre and wet web properties and behaviour, in Fundamentals of Paper Performance, Vol. 3, Tech. Assoc. Aust. NZ Pulp Pap. Ind, pp. 1–12.
Kleppe, P.J. (1970) Kraft pulping. TAPPI, 53 (1), 35–47.
McKeever, D.B. and Jackson K.C. (1990) Supplemental tables supporting 1989 USDA RPA (Renewable Resources Planning Act). USDA For. Serv., Pac. Northwest Res. Stn, Portland, Oregon.
Nomura, Y. (1980) Quinone additive cooking. Japan TAPPI, 34 (1), 50–55.
Pye, E.K. (1990) Alcell process: proven alternative to kraft pulping. Proceedings of 1990 Tappi Pulping Conference, 2, Tappi Press, Atlanta, Georgia, pp. 991–6.
Rimpi, P.K. (1983) Chemical recovery in the first SAP-market pulp producing mill. Proceedings of 1983 Pulping Conference, Houston, Texas, Vol. 1, Tappi Press, Atlanta, Georgia, pp. 59–61.
Rydholm, S.A. (1965) Pulping Processes, Wiley-Interscience, New York.
Rydholm, S.A. (1970) Continuous pulping processes. Special Tech. Assoc. Publ. No. 7. Tappi, New York.
Sjoblom, K., Hartler, N., Mjoberg, J. and Sjoden, L. (1983) A new technique for pulping to low kappa numbers in batch pulping: results of mill trials. TAPPI, 66 (9), 97–102.
Sjoblom, K., Mjoberg, J., Soderqvist-Lindblad, M. and Hartler, N. (1988) Extended delignification in kraft cooking through improved selectivity. Pap. Puu., 70 (5), 452–60.
Sjöström, E. (1981) Wood Chemistry: Fundamentals and Applications, Academic Press, Orlando.
Smook, G.A. (1982) Handbook for Pulp and Paper Technologists, Tappi, Atlanta, Georgia and Can. Pulp Pap. Assoc., Montreal, Quebec.
Swartz, J.N., Muhonen, J.M., LaMarche, L.J., Hambaugh, P.C. and Richter, F.H. (1969) Alkaline pulping, in Pulp and Paper Manufacture Vol. 1 The Pulping of Wood (eds R.G. Macdonald and J.N. Franklin), McGraw-Hill, New York, pp. 439–575.
Uprichard, J.M. and Okayama, T. (1984) Neutral sulphite-anthraquinone pulping of corewood and slabwood samples of new crop Pinus radiata. APPITA, 37 (7), 560–75.
Vroom, K.E. (1957) The H Factor: the means of expressing cooking times and temperatures as a single variable. Pulp Pap. Mag. Can., 58 (3), 228–31.
Wood, J.R. and Goring, D.A.I. (1973) The distribution of lignin in fibres produced by kraft and acid sulphite pulping of spruce wood. Pulp Pap. Mag. Can., 74 (9), 117–21(T309–13).
Rights and permissions
Copyright information
© 1993 J.C.F. Walker
About this chapter
Cite this chapter
Uprichard, J.M., Walker, J.C.F. (1993). Pulp and paper manufacture. In: Primary Wood Processing. Springer, Dordrecht. https://doi.org/10.1007/978-94-015-8110-3_13
Download citation
DOI: https://doi.org/10.1007/978-94-015-8110-3_13
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-015-8112-7
Online ISBN: 978-94-015-8110-3
eBook Packages: Springer Book Archive