Abstract
The resources required for the solution of an optimization problem typically increase with the dimensionality of the problem at a rate which is more than linear. That is, if we double the number of design variables in a problem, the cost of solution will typically more than double. Large problems may also require excessive computer memory allocations. For these reasons we often seek ways of breaking a large optimization problem into a series of smaller problems.
Chapter PDF
References
Giles, G.L. “Procedure for Automated Aircraft Wing Structural Design,” J. of the Structural Division, ASCE, 97, pp. 99–113, 1971.
Sobieszczanski, J. and Loendorf, D. D., “A Mixed Optimization Method for Au- tomated Design of Fuselage Structures”, J. of Aircraft, 9, pp. 805–811, 1972.
Sobieszczanski-Sobieski, J., James, B.B., and Dovi, A.R., “Structural Optimization by Multilevel Decomposition”, AIAA J., 23, 11, pp. 1775–1782, 1985.
Thareja, R., and Haftka, R. T., “Efficient Single-Level Solution of Hierarchical Problems in Structural Optimization”, Proceedings, AIAA/ASME/ASCE/AHS 28th Structures, Structural Dynamics and Materials Conference, Monterey California, April, 1987.
Thareja, R., and Haftka, R.T., “Numerical Difficulties Associated with using Equality Constraints to Achieve Multilevel Decomposition in Structural Optimization,” AIAA Paper No. 86–0854CP, Proceedings of the AIAA/ASME/ASCE/ AHS 27th Structures, Structural Dynamics and Materials Conference, San Antonio, Texas, May 1986.
Schmit L.A., and Mehrinfar, M., “Multilevel Optimum Design of Structures with Fiber-Composite Stiffened Panel Components”, AIAA J., 20,1, pp. 138–147, 1982.
Kirsch, U., “Multilevel Optimal Design of Reinforced Concrete Structures”, Engineering Optimization, 6, pp. 207–212, 1983.
Kirsch, U., “An Improved Multilevel Structural Synthesis”, J. Structural Mechanics, 13, pp. 123–144, 1985.
Rosen, J.B., “Primal Partition Programming for Block Diagonal Matrices”, Numerische Mathematik, 6, pp. 250–260, 1964.
Geoffrion, A.M., “Elements of Large-Scale Mathematical Programming”, in Perspectives on Optimization (A.M. Geoffrion, editor) Addison Wesley, 1972.
Barthelemy, J.F.M., and Sobiesczanski-Sobieski, J., “Extrapolation of Optimum Designs based on Sensitivity Derivatives,” AIAA J., 21, pp. 797–799, 1983.
Haftka, R.T., “An Improved Computational Approach for Multilevel Optimum Design”, J. of Structural Mechanics, 12, 2, pp. 245–261, 1984.
Barthelemy, J-F. M., and Riley, M. F., “An Improved Multilevel Optimization Approach for the Design of Complex Engineering Systems”, AIAA J., 26, pp. 353–360, 1988.
Sobieszczanski-Sobieski, J., James, B. B., and Riley, M. F., “Structural Sizing by Generalized Multilevel Optimization”, AIAA J., 25, 1, pp. 139–145, 1987.
Fox, R. L., and Schmit, L. A., “Advances in the Integrated Approach to Structural Synthesis”, J. of Spacecraft and Rockets, 3, pp. 858–866, 1966.
Haftka, R.T., “Simultaneous Analysis and Design”, AIAA J., 23, 7, pp. 1099–1103, 1985.
Haftka, R. T., and Kamat, M. P., “Simultaneous Nonlinear Analysis and Design”, Computational Mechanics, 4, 6, pp. 409–416, 1989.
Shin, Y., Haftka, R. T., and Plaut, R. H., “Simultaneous Analysis and Design for Eigenvalue Maximization”, AIAA J., 26, 6, pp. 738–744, 1988.
Pedersen, P., “On the Minimum Mass Layout of Trusses, AGARD Conference Proceedings, No. 36 on Symposium on Structural Optimization, Turkey, October, 1969, pp. 11. 1–11. 18, 1971.
Vanderplaats, G.N., and Moses, F., “Automated Design of Trusses for Optimum Geometry”, J. of the Structural Division, ASCE, 98, ST3, pp. 671–690, 1972.
Spillers, W.R., “Iterative Design for Optimal Geometry, J. of the Structural Division, ASCE, 101, ST7, pp. 1435–1442, 1975.
Kirsch, U., “Synthesis of Structural Geometry using Approximation Concepts”, Computers and Structures, 15, 3, pp. 305–314, 1982.
Ginsburg, S., and Kirsch, U., “Design of Protective Structures against Blasts”, J. of the Structural Division, ASCE, 109, pp. 1490–1506, 1983.
Kirsch, U., “Multilevel Synthesis of Standard Building Structures,” Engineering Optimization, 7, pp. 105–120, 1984.
Kirsch, U., “A Bounding Procedure for Synthesis of Prestressed Systems,” Computers and Structures, 20, pp. 885–895, 1985.
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 1990 Springer Science+Business Media Dordrecht
About this chapter
Cite this chapter
Haftka, R.T., Gürdal, Z., Kamat, M.P. (1990). Decomposition and Multilevel Optimization. In: Elements of Structural Optimization. Solid Mechanics and Its Applications, vol 1. Springer, Dordrecht. https://doi.org/10.1007/978-94-015-7862-2_10
Download citation
DOI: https://doi.org/10.1007/978-94-015-7862-2_10
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-015-7864-6
Online ISBN: 978-94-015-7862-2
eBook Packages: Springer Book Archive