Abstract
For a long time explosive compaction was considered an unsuitable tool for industrial application. Usually powder compaction takes place in heavy equipment at very low loading rates. The very high loading rates during explosive compaction were difficult to control. On the other hand no data were available about the explosive’s parameters and their dependence on the method used and the type of powder to be compacted.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
La Rocca, E. W. and Pearson, J. Rev. Sci. Instr., 29 (1958), 848.
La Rocca, E. W. and Pearson, J. US Patent 2,948,923, June 4, 1958.
Stein, E. M., Van Orsdel, J. R. and Schneider, P. V. Metal Progress, 83 (April 1964), No. 4, 83.
Brejcha, R. J. and Mcgee, S. W. American Machinist, 106 (1962), 63–65.
Hagemeyer, J. W. and Regalbuto, J. A. International Journal of Powder Metallurgy, 4 (1968) No. 3, 19; see also vol. I of the Institute of Metals (1971), 209.
Raybould, D. 15th Int. MTDR Conf., Macmillan, London, 1975.
McKenna, P. M., Redmond, J. C. and Smith, E. N. US Patent 2,648,125.
Porembka, S. W. and Simons, C. C. Powder Metallurgy, 6 (1960), 125.
Montgomery, W. T. and Thomas, H. Powder Metallurgy (1960), No 6, 125.
Pearson, J. High energy rate forming, ASTME SP, 60–150, Dec. 1961.
Paprocki, S. J., Simons, C. and Carlson, R. J. Advanced high energy rate forming II,Astme SP, 62–29, 1962.
Liebermann, L, Knop, L. H. and Zernow, L. High energy rate forming, ASTME SP, 23–29, 1963.
Rinehart, J. S. and Pearson, J. Explosive Working of Metals, 1963, Pergamon Press, Oxford, London, New York.
Leonard, R. W. Battelle Techn. Review 17 (1968), No. 10, 13.
Deribas, A. A. et al. Fizika Gorenija i Vzryva 9 (1973), 883.
Rankine, W. J. M. Phil. Trans. Roy. Soc., London, 160 (1870).
Hugoniot, H. J. ecole polytech, 58 (1889).
Meyers, M. A. Proc. 5th Int. Conf HERE, University of Denver, Colorado, June 1975.
Butcher, B. M. and Karnes, C H. J. appl. Phys., 40, No. 7 (1969), 2967.
Butcher, B. M., Carroll, M. M. and Holt, A. C. J. appl. Phys., 45, No. 9 (1974), 3864.
Boade, R. R. J. appl. Phys., 39, No. 3 (1968), 1609.
Boade, R. R. J. appl. Phys., 39, No. 12 (1968), 5693.
Boade, R. R. J. appl. Phys., 40, No. 9 (1969), 3781.
Hermann, W. J. appl. Phys., 40, No. 6 (1969), 2490.
Walsh, I. M. and Rice, H. M. J. Chem. Phys., 26 (1957), 815.
Hollenberg, K. and Miller, F. BMVg WT12–3 (1971).
Leonard, R. W., Laber, D., Linse, V. D. Proc. 2nd Int. Conf HERE, Estes Park, Co., USA, 1969.
Prümmer, R. Ber. Deutsche Keramische Gesellschaft 50 (1973), 75. See also Proc. 4th Int. Conf HERE, Estes Park, Co., USA, 1973.
Deribas, A. A. and Staver, A. M. Eizika Gorenija i Vzryva, 10 (1974), 568.
Staver, A. M. In Shock Waves and High Strain Rate Phenomena in Metals, eds. M. A. Meyers and L. E. Murr, Plenum Press, New York and London, 1981. See also Proc. 4th Intl. Conf HERE (1975), Denver, Co., USA.
Montgomery, W. T. and Thomas, H. Powder Metallurgy (1960), No. 6, 125.
Paprocki, S. J. et al Paper Nr. SPA 2–29, Creative Manufacturing Seminars, Detroit: ASTME (1961/62).
Strohecker, D. E. High velocity compaction of metal powders, in High Energy Rate Working of Metals, Oslo: Central Inst. Ind. Res. (1964), 481.
Laber, R. W. Batelle Techn. Rev., Nov/Dec. (1968), 13.
Deribas, A. A. and Stayer, A. M. Fizika Gorenija i Vzryva, 10 (1974), No. 4, 568.
Lennon, A. R. C., Balla, A. K. and Williams, J. D. Proc. 6th. Int. Conf. HERF, Sept. 1977, Essen, Germany.
Mikhailov, A. N. and Dremin, A. N. Fizika Gorenija i Vzryva 13 (1977), No. 1, 115.
Prümmer, R. and Ziegler, G. Proc. 5th Intl. Conf. on High Energy Rate Fabrication, 1975, Denver, Colorado, USA. See also: Powders Metallurgy International No. 1 (1977), 14.
Prümmer, R. and Ziegler, G. Proc. 6th Intl. Conf on High Energy Rate Fabrication, 1977, Essen, Germany.
Prümmer, R. Proc. 6th AI RAPT Conf. High Pressure Science and Technology, eds. K. D. Timmerhaus and M. S. Barber (1979), Plenum Press, New York, p. 814.
Prümmer, R. Germ. Pat. No. 2436951 (1974).
Roman, O. V. and Gorobtsov, V. G. Int. J. Powder Metallurgy and Powder Technology 11 (1975) 55.
Roman, O. V. In Shock Waves and High Strain Rate Phenomena in Metals, Meyers, M. A. and Murr, L. E. eds., 1981, Plenum Press, New York.
Mcqueen, R. J. and Marsh, S. P. J. appl. Phys., 31 (1960), 1253.
Walsh, J. M. and Christian, R. H. Phys. Rev., 97 (1955), No. 6,1544.
Atroshenko, E. S. and Kosovich, V. A.Technologija Masinostroenija (Russ.) (1971), 67.
Krupnikov, K. K., Brazhnik, M. I. and Krupnikova, V. P. Soviet Physics JETP 15 (1962), No. 3, 470.
Pikus, I. M. and Roman, O. V. Fizika Gorenija i Vzryva, 10 (1974), 10, 782.
Kunin, N. f., Yurchenko, B. D. and Ovichinnikov, O. P. Poroshkovaja Metallurgija, 10 (1971), 106, 19.
Batsanov, S. S. In Preparative Methods in Solid State Chemistry, Academic Press Inc., New York, London (1972), pp. 133–146.
Beljakov, G. v., Livshits, L. D. and Rodionov, V. N. Izv. Earth Physics, 10, (1974), 92–94.
Nesterenko, V. E. Dissertation Novosibirsk, 1974.
Kimura, Y. Japan J. of Appl. Phys., 2 (1963), 312.
Horiguchi, Y. and Nomura, Y. Bull. Chem. Soc. Japan 36 (1963), 486.
Horiguchi, Y. and Nomura, Y. J. Less-Common Metals, 11 (1966), 378.
Horiguchi, Y., Nomura, Y. and Katajama, S. Kogyo Kogaku Zassi 69 (1966), 1007.
Batsanov, S. S. and Zolotova, E. S. Dokl. Akad. Nauk SSR 180 (1968), 93.
Batsanov, S. S. et al. Dokl. Akad. Nauk SSR 185 (1969), 330.
Batsanov, S. S. et al. Phys. Gorenija Vzryva, 5 (1969), 283.
Otto, G., Reece, O. Y. and Roy, U. Applied Physics Letters, 18 (1971), 418.
Barski, I. M., Dikovskii, V. Y. and Matytsin, A. I. Fizika Gorenija i Vzriva, 8 (1972) 474.
Pan, V. M. et al IETP Lett., 21 (1975), No. 8, 228.
Dew-Hughes, D. and Linse, V. D. J. Appl Phys., 50 (1979), 3500.
Deribas, A. A., Staver, A. M. Fizika Gorenija i Vzf-yva, 6 (1970), 122.
Deribas, A. A. et al Proc. Sympos. Behavior of Dense Media Under High Dynamic Pressures, 1967, Paris.
Batsanov, S. S. J. Struct. Chim., 11 (1970), 156.
De Carli, P. S. and Jamieson, J. C. Science, 133 (1961), 1821.
De Carli, P. S. In Science and Technology of Industrial Diamonds ed. J. Burls, 1967, Industrial Diamond Information Bureau, London.
De Carli, P. S. US Patent 3238019 (1966).
Kiyoto, K. et al. J. Industrial Explosive Society Japan, 37 (1976), Nr. 3, 152.
Sekata, N. and Sekikawa, Y. J. of Materials Science, 16 (1981), 1730.
Hanneman, R. E., Strong, H. M. and Bundy, F. P. Science, 155 (1967), 995.
Ping-huang, S. et al. Proc. II Meeting on explosive working of materials, Novosibirsk, 1981.
Bergman, O. R. Proc. 7th Intl. Conf HERF, Leeds, England, 1981.
Balchan, a. S. and Cowan, G. R. US Patent 3851027 (1974).
Altshuler, L. V. Usp. Fiz Nauk, 85 (1965), 198.
Adadurov, G. A. and Aliez, Z. G. et al. Dokl. Akad. Nauk SSR, 172 (1967), 1066.
Johnson, Q. and Mitchell, A. C. Phys. Rev. Letters, 29 (1972), 1361.
Dulin, I. N. and Altshuler, L. V. et al. Fiz. Tverd. Tela, 11 (1969), 1262.
Coleburn, N. L. and Forbes, J. V.J. Chem. Phys., 48 (1968), 555.
Batsanov, S. S. and Batsanova, L. R. et al. Zh. Strukt. Khim, 9 (1968), 1024.
Vereshtshagin, L. F., et al. German Patent claim 2 235 240.8 (1972).
Drjomin, A. N. et al. German Patent claim 22193948 (1972).
Mitomo, M. and Setaka, N. J. of Mat. Science-Letters, 16 (1981), 852.
Morris, D. G. Metal Science, July 1980, 215–220.
Roman, O. V. et al. Proc. 4th Intl. Conf. on Rapidly Quenched Metals, Sendai, Japan 1981.
Cline, C. F. Proc. 4th Intl. Conf on Rapidly Quenched Metals, Sendai, Japan 1981.
Belyakov, G. v., Livshits, L. D. and Rodinov, v. N. Izv. Earth Physics, 1974, No. 10, 92.
Prümmer, R.: J. Mat. Techn. 4 (1973), No. 5, 236.
Meyers, M. A., Gupta, B. B. and Murr, L. E. In Shock Waves and High Strain Rate Phenomena in Metals, eds. M. A. Meyers and L. E. Murr, 1981, Plenum Press, New York.
Reybold, D. J. Mat. Sci., 16 (1981), 589.
Blazynski, T. Z. and El-Sobky, H. Metals Technology, March 1980, 107.
Wolff, E. and Prümmer, R. Raumfahrtforsch, 17 (1973) 16.
Böhle, p. and Erdman-Jesnitzer, F. Aluminium, 44 (1968), 683.
Wittkowski, D. S. and Otto, H. Proc. 4th Intl. Conf. HERF (1973), Denver.
Horiguchi, Y. and Nomura, Y. Kogyo Kagaku Zassi, 68 (1965), 910.
Klein, M. J., Rough, F. A. and Simons, C. C. J. Am. Ceram. Soc., 46 (1963), 356.
Klein, M. J. and Rudman, P. S. Phil. Mag., 14 (1966), 1199.
Bergman, O. R. and Barrington, J. J. Am. Ceram. Soc., 49 (1966), 502.
Heckel, R. W. and Youngblood, J. L. J. Am. Ceram. Soc., 51 (1968), 398.
Samsonov, G. V.Poroshkaya Metallurgiya, 109 (1972), 93.
Prümmer, R. and Ziegler, G. Proc. 7th Intl. Conf. HERF Sept. 1981, Leeds, England.
Hoenig, C. L. and Yust, C. S. Ceramic Bulletin, 60 (1981), 1175.
Prümmer, R. Europa industrie revue, 1 (1975), 23.
Boginski, L. Planseeberichte für Pulvermetallurgie, 17 (1969), 225.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1983 Applied Science Publishers Ltd
About this chapter
Cite this chapter
Prümmer, R. (1983). Powder Compaction. In: Blazynski, T.Z. (eds) Explosive Welding, Forming and Compaction. Springer, Dordrecht. https://doi.org/10.1007/978-94-011-9751-9_10
Download citation
DOI: https://doi.org/10.1007/978-94-011-9751-9_10
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-011-9753-3
Online ISBN: 978-94-011-9751-9
eBook Packages: Springer Book Archive