Abstract
The drawing or orientation stretching process is a vital post-spinning operation for a melt-spun fibre. An undrawn fibre deforms inelastically under low loads and has a poor stress value. Such a material has very little utility for most textile applications. Through the drawing operation the fibre is orientationally strengthened due to alignment of the molecular chains along the fibre axis and shows enhanced recovery. Drawing also induces changes in the levels of crystallinity and sometimes in the crystalline form. Both semicrystalline fibres with a lamellar morphology in the undrawn state and amorphous fibres with an entangled network of molecular chains are transformed into a fibrillar structure through the process of drawing. An increase in draw ratio increases the orientational order as well as conformational conversions, resulting in a structure which has much higher strength, modulus and dimensional stability compared with its undrawn state.
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsPreview
Unable to display preview. Download preview PDF.
References
Vincent, P.I. (1960) Polymer, 1(7), 7–19.
Ludewig, H. (1964) Polyester Fibres Chemistry and Technology, WileyInterscience, London, p. 230.
Thompson, A.B. (1959) J. Polym. Sci., 35, 741.
Spruiell, J.E., McCord, D.E. and Beuerlein, R.A. (1972) Trans. Soc. Rheol., 16(3), 535–555.
Gupta, V.B., Sett, S.K. and Venkataraman, A. (1990) Polym. Eng. Sci., 30, 1252.
Kobayashi, K. (1970) Sen-i-Gakkaishi, 26, 550–559.
Brody, H. and Ward, I.M. (1992) In Concise Encyclopedia of Polymer Processing and Applications (ed. P.J. Corish), Pergamon Press, Oxford, pp. 298–299.
Fujimoto, F., Yamaguchi, K., Ikide, H., Kishida, H. and Arai, T. (1973) J. Textile Mach. Soc. Japan, 19, 1–6.
Sbrolli, W. (1968) In Man-made Fibres, Vol. 2 (eds H.F. Mark, S.M. Atlas and E. Cernia), Interscience Publishers, New York, p. 267.
Gill, R.A. and Benjamin, C. (1979) Polypropylene Fibres and Textiles, 2nd International Conference, Plastic and Rubber Institute, September, pp. 10.1–10.11.
Ito, M., Tanaka, K. and Kanamoto, T. (1987) J. Polym. Sci.,Polym. Phys., 25, 2127–2138.
Urbanczyk, G.W. (1962) J. Polym. Sci., 59, 215–220.
Gianchandani, J., Spruiell, J.E. and Clark, E.S. (1982) J. Appl. Polym. Sci., 27, 3527–3551.
Sakuma, Y. and Rebenfeld, L. (1966) J. Appl. Polym. Sci., 10, 637–652.
Novak, I.I., Suchikov, V.A. and Zosin, L.P. (1969) Vys. Sod., 11(6), 1325–1329.
Prevorsek, D.C., Harget, P.G., Sharma, R.K. and Reimschuessel, A.C. (1974) J. Macromol. Sci., Phys., B9, 127–155.
Slutsker, L.I. and Utevskii, L.E. (1984) J. Polym. Sci., Polym. Phys. Ed., 22, 805–826.
Allison, S.W., Pinnock, P.R. and Ward, I.M. (1966) Polymer, 7, 66.
Pakhomov, P.M., Pantev, V.A. and Shablygin, M.V. (1979) Khim. Volokna, March-April, pp. 32–34.
Sengupta, A.K., Singh, R.K. and Majumdar, A. (1974) Textile Res. J., 44, 155–163.
Gribanov, S.A. and Aizenshtein, E.M. (1981) Khim. Volokna, May-June, pp. 18–23.
Fakirov, S. and Evstatiev, M. (1990) Polymer, 31,431.
Brody, H. (1983) J. Macromol. Sci., Phys., B22(3), 407–423.
Yoon, K.J., Desai P. and Abhiraman, A.S. (1986) J. Polym. Sci., Polym. Phys. Ed., 24, 1665–1674.
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1997 Springer Science+Business Media Dordrecht
About this chapter
Cite this chapter
Sengupta, A.K. (1997). Drawing of melt-spun fibres. In: Gupta, V.B., Kothari, V.K. (eds) Manufactured Fibre Technology. Springer, Dordrecht. https://doi.org/10.1007/978-94-011-5854-1_8
Download citation
DOI: https://doi.org/10.1007/978-94-011-5854-1_8
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-010-6473-6
Online ISBN: 978-94-011-5854-1
eBook Packages: Springer Book Archive