Abstract
Seeded emulsion polymerization is the most common preparation method for composite latexes. Unfortunately, this technique may generate particles with a variety of morphologies. The core-shell morphology, where a second polymer type totally covers the first-stage particle, is only an idealized representation based upon the sequential monomer addition. Transition morphologies, such as hemispherical particles, raspberry, sandwich, mushroom, and confetti-like structures, are frequently reported [1-3]. Design and control of latex particle morphology are often crucial to fulfill the end-use requirements for these materials.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Okubo, M., Katsuta, Y., and Matsumoto, Y. (1980) J. Polym. Sci., Polym. Lett. Ed., 18 481.
Okubo, M. (1990) Makromol. Chem., Macromol. Symp., 35, 307.
Rudin, A. (1995) Makromol. Symp., 92 53.
Cho, J. and Lee, K.W. (1985) J. Apps. Polym. Sci., 30, 1903.
Lee, S. and Rudin, A. (1989) Makromol. Chem., Rapid Commun., 10 655.
Lee, S. and Rudin, A. (1992) Polymer Latexes, E. S. Daniels, E. D. Sudol, and M. S. El-Aasser (eds.), ACS Symposium Series, 492 American Chemical Society, Washington D.C., Chapter 15 234.
Lee, S. and Rudin, A, (1992) J. Polym. Sci.,Polym. Chem. Ed., 30, 2211.
Vandezande, G.A. and Rudin, A. (1994) J. Coating Tech., 66, 99.
Mills, M.F., Gilbert, R.G. and Napper, D.H. (1990) Macromolecules, 23 4247.
Durant, Y.G.J. and Guillot, J. (1993) Colloid Polym. Sci., 271 607.
M. Okubo, Y. Katsuta, and T. Matsumoto J. Polym. Sci., Polym. Lett. Ed., 20 45, (1982).
Min, T.I., Klein, A., El-Aasser, M.S., and Vanderhoff, J.W. (1983) J. Polym. Sci.,Polym. Chem. Ed., 21 2845.
Dimonie, V.L., El-Aasser, M.S., Klein, A. and Vanderhoff, J.W. (1984) J. Polym. Sci., Polym. Chem. Ed.., 22 2197.
Eckersley S. and Rudin, A. (1994) J. Apps. Polym. Sci., 53 1139.
Jonsson, J.E., Hassander, H. and Tornell, B. (1994) Macromolecules,27 1932.
Torza, S. and Mason, S.G. (1970) J. Colloid Inter. Sci., 33 67.
Sundberg, D.C., Casassa, A.P., Pantazopoulos, J., Muscato, M.R., Kronberg, B., and Berg, J. (1990) J. Appl. Polym. Sci., 41 1425.
Dimonie, V.L., El-Aasser, M.S., and Vanderhoff, J.W. (1988) Polym. Mat. Sci. Eng., 58 821.
Chen, Y.C., Dimonie, V.L., and El-Aasser, M.S. (1991) J. Appl. Polym. Sci., 41 1049.
Chen, Y.C., Dimonie, V.L., and El-Aasser, M.S. (1991) Macromolecules,24 37–79.
Chen, Y.C., Dimonie, V.L., and El-Aasser, M.S. (1992) J. Appl. Polym. Sci., 45 487.
Paul, D.R. (1978) Polymer Blends,D. R. Paul and J. W. Barlow (eds.), Academic, Vol. 2, Chapter 12.
Gaylord, N.G. (1989) J. Macromol. Sci., Chem.,26 1211.
Paul, D.R. and Barlow, J.W. (1980) J. Macromol. Sci., Chem..,18 109.
Barlow, J.W. and Paul, D.R. (1984) Polym. Eng. Sci., 24 525.
Fayt, R., Jerome, R., and Teyssie, P. (1989) Multiphase Polymers: Blends and lonomers, L. A. Utracki and R. A. Weiss (eds.), American Chemical Society, Washington, D.C., Chapter 2.
Meijs, G.F. and Rizzardo, E. (1990) J. Macromol. Sci., Rev. Macromol. Chem. Phys., 30 305.
M.K. Mishra (ed.) (1994) Macromolecular Design: Concept and Practice, Polymer Frontiers International New York, Part 1.
Enikolopyan, N.S., Smirnov, B.R., Ponomarev, G.V., and Belgovskii, I.M. (1981) J Polym. Sci.,Polym. Chem. Ed., 19 879.
Burczyk, A.F., O’Driscoll, K.F., and Rempel, G.L. (1984) J. Polym. Sci.,Polym. Chem. Ed., 22 3255.
Sanayei, R.A. and O’Driscoll, K.F. (1989) J. Macromol. Sci., Chem., 26 1137.
Chotirotsukon, W. (1991) M.S. Thesis,Lehigh University.
Rajatapiti, P. (1996) Ph.D. Dissertation, Lehigh University.
Rajatapiti, P., Dimonie, V.L. and El-Aasser, M.S. (1995) J. Macromol. Sci., Chem..,32 1445.
Rajatapiti, P., Dimonie, V.L., EI-Aasser, M.S., and Vratsanos, M.S., accepted.
Rajatapiti, P., Dimonie, V.L., and El-Aasser, M.S., (1996) J. Appl. Polym. Sci., 61 891.
Vijayendran, B.R. (1979) J. Appl. Polym. Sci., 23 733.
Zosel, A. (1995) Polym. Adv. Tech., 6 263.
Gauthier C. and Perez, J. (1995) Polym. Adv. Tech., 6 1042.
Dickie, R.A. (1973) J. Appl. Polym. Sci., 17 45.
Dickie, R.A., Cheung, M.F., and Newman, S. (1973) J. Appl. Polym. Sci., 17 65.
Dickie R.A. and Cheung, M.F. (1973) J. Appl. Polym. Sci., 17 79.
Cavaille, J.Y., Vassoille, R., Thollet, G., Rios, L., and Pichot, C. (1991) Colloid Polym. Sci., 269 248,.
Cavaille, J.Y., Jourdan, C., Kong, X.Z., Perez, J. and Pichot, C. (1986) Polymer, 27 693.
Jourdan, C., Cavaille, J.Y., and Perez, J. (1988) Polym. Eng. Sci., 28 3218.
Pichot, C., Kong, X.Z., Guillot, J., and Cavaille, J.Y. (1991) Polym. Mat. Sci. Eng., 64 276.
Nelliappan, V., El-Aasser, M.S., Klein, A., Daniels, E.S., and Roberts, J.E. (1996) J. Polym. Sci.,Polym. Chem. Ed., 34 3173.
Nelliappan, V., El-Aasser, M.S., Klein, A., Daniels, E.S., and Roberts, J.E. (1996) J. Polym. Sci.,Polym. Chem. Ed., 34 3183.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1997 Springer Science+Business Media Dordrecht
About this chapter
Cite this chapter
Rajatapiti, P., Dimonie, V.L., El-Aasser, M.S. (1997). Latex Particle Morphology. The Role of Macromonomers as Compatibilizing Agents. In: Asua, J.M. (eds) Polymeric Dispersions: Principles and Applications. NATO ASI Series, vol 335. Springer, Dordrecht. https://doi.org/10.1007/978-94-011-5512-0_13
Download citation
DOI: https://doi.org/10.1007/978-94-011-5512-0_13
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-010-6321-0
Online ISBN: 978-94-011-5512-0
eBook Packages: Springer Book Archive