Abstract
In the present paper the failure mechanism and size effect of the concrete cone resistance is reviewed and studied. The influence of material and geometrical parameters on the failure mode and size effect is investigated. In the numerical studies the smeared crack finite element analysis, based on the microplane material model for concrete, was used. Both, experimental and numerical results show that there is a strong size effect on the nominal concrete cone pull-out strength. It is demonstrated that besides the embedment depth the scaling of the head of the stud as well as the scaling of the concrete member influence the nominal strength.
Key words
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
ACI Standard 349 (1985). Code Requirements for Nuclear Safety Related Concrete Structures, Appendix B - Steel Embedments.
Ballarini, R., Shah, S. and Keer, L. (1986). Failure characteristics of short anchor bolts embedded in a brittle material. Proceedings of the Royal Society of London, A 404, 35–54.
Bažant, Z.P. and Oh (1983). Crack band theory for fracture of concrete. RILEM 93(16), 155–177.
Bažant, Z.P.(1984). Size effect in blunt fracture: concrete, rock, metal. Journal of Engineering Mechanics, ASCE, 110(4), 518–535.
Bode, H. and Hanenkamp, W. (1985). Zur tragfähigkeit von kopfbolzen bei zugbeanspruchung. Bauingenieur, 361–367.
Committee Euro-International du Beton (1990). CEB-FIP Model Code - Final Draft, Paris.
Eligehausen, R. and Sawade, G. (1985). Behavior of concrete in tension. Betonwerk + Fertigteil Technik 5 and 6.
Eligehausen, R. and Sawade, G. (1989). A fracture mechanics based description of the pull-out behavior of headed studs embedded in concrete structures. RILEM Report (Edited by L. Elfgren), Chapman and Hall, London, 281–299.
Eligehausen, R. and Ožbolt, J. (1990). Size effect in anchorage behavior. Proceedings of the 8th European Conference on Fracture - Fracture Behavior and Design of Materials and Structures, Torino, Italy, 2671–2677.
Eligehausen, R., Bouška, P., Červenka, V. and Pukl, R. (1992). Size effect of the concrete cone failure load of anchor bolts. Fracture Mechanics of Concrete Structures (FRAMCOS 1) (Edited by Bažant, Z.P.), Breckenridge, Elsevier Applied Science, London, New York, 517–525.
Eligehausen, R., Mallee, R. and Rehm, G. (1997). Befestigungstechnik, Ernst and Sohn, Berlin, Germany.
Furche, J. (1994). Zum Trag- und Verschiebungsverhalten von Kopfbolzen bei zentrischem Zug, Dissertation, University of Stuttgart.
Ottosen, N.S. (1988). Nonlinear finite element analysis of pull-out tests. Journal of Structural Division 107(4), 591–603.
Ožbolt, J. (1995). Massstabseffekt in Beton- und Stahlbeton- konstruktionen, Postdoctoral Thesis, University of Stuttgart, Germany.
Ožbolt, J. and Bažant, Z.P. (1996). Numerical smeared fracture analysis: nonlocal microcrack interaction approach. IJNME 39(4), 635–661.
Ožbolt, J., Li, Y-J. and Kozar, I. (1997). Microplane model for concrete - mixed approach. Submitted for publication in IJSS.
Reinhardt, H.W. (1981). Similitude of brittle fracture of structural concrete. IABSE Colloquium on Advances in Reinforced Concrete, Delft, 175–184.
RILEM TC 90 - FMA (1990). Round robin analysis of anchor bolts - invitation. Materials and Structures 23, 78.
Sawade, G. (1994). Ein energetisches Materialmodell zur Berechnung des Tragverhaltens von zugbeanspruchtem Beton, Dissertation, University of Stuttgart.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1999 Springer Science+Business Media Dordrecht
About this chapter
Cite this chapter
Ožbolt, J., Eligehausen, R., Reinhardt, H.W. (1999). Size effect on the concrete cone pull-out load. In: Bažant, Z.P., Rajapakse, Y.D.S. (eds) Fracture Scaling. Springer, Dordrecht. https://doi.org/10.1007/978-94-011-4659-3_22
Download citation
DOI: https://doi.org/10.1007/978-94-011-4659-3_22
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-010-5965-7
Online ISBN: 978-94-011-4659-3
eBook Packages: Springer Book Archive