Abstract
The response of particulate matter to shock treatment has been under investigation for several decades, but usually in connection with metallic powder compaction. It is only in the last 20 years or so that the interest in the changes effected by the passage of a shock wave through nonmetallic powder materials ceased to be purely academic. Practical, industrial considerations have given sufficient impetus to research and development into the shock treatment of powders to produce a considerable volume of literature in the area of, naturally, metallic powders, and then of ceramics, and to extend the work, more recently, to polymers and polymeric mixtures and blends.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Bergmann, O. R. and Barrington, J. J. Am. Ceram. soc., 49 (1966), 502.
Carlson, R. J., Porembka, S. W. and Simons, C. C. Ceram. Bull., 34 (1965), 266.
Prummer, R. Explosive Welding, Forming and Compaction, Ed. T. Z. Blazynski, Applied Science Publishers, London, New York, 1983, p. 369.
Gourdin, W. H., Echer, C. J. and Cline, C. F. In: Proc. 7 HERF Conference, Ed T. Z. Blazynski, University of Leeds, 1981, p. 233.
Prummer, R. and Ziegler, G. In: Proc. 5 HERF Conference, Ed. R. H. Wittman, University of Denver, Colorado, Paper 2.4, 1975.
Kondo, K., Soga, S., Sawoaka, A. and Maki, M. J. Mater. Sci., 20 (1985), 1033.
Graham, R. A., Morosin, B., Venturini, E. L., Carr, M. J. and Beauchamp, E. K. In: Metallurgical Applications of Shock Waves and High Strain-Rate Phenomena, Ed. L. E. Murr, K. P. Staudhammer and M. A. Myers, Marcel Dekker, New York, 1986, p. 1005.
Hegazy, A. A., Blazynski, T. Z. and El-Sobky, H. In: Mechanical Properties of Materials at High Rates of Strain, Ed. J. Harding, The Institute of Physics, Bristol, London, 1984, p. 413.
Raybould, D. and Blazynski, T. Z. In: Materials at High Strain Rates, Ed. T. Z. Blazynski, Elsevier Applied Science Publishers, London, New York, 1987, p. 71.
Blazynski, T. Z. and Hegazy, A. A. Z. Werkstofftechnik, 17 (1986), 363.
Hegazy, A. A. and Blazynski, T. Z. J. Mater. Sci., 21 (1986), 4262.
Hegazy, A. A. and Blazynski, T. Z. J. Mater. Sci., 22 (1987), 3321.
Muhanna, A. H. and Blazynski, T. Z. Compos. Sci. Technol., 33 (1988), 121.
Maroani, H. A. and Blazynski, T. Z. J. Mech. Work. Technol., 18 (1989), 315.
Blazynski, T.Z. In Ref. 7, p. 189.
Blazynski, T. Z. In: Tribology in Particulate Technology, Eds J. B. Briscoe and M. J. Adams, Adam Hilger, Bristol, 1987, p. 303.
Blazynski, T. Z. In: Shock Waves Jor Industrial Applications, Ed. L. E. Murr, Noyes Publishers, Park Ridge, NJ, 1988, p. 406.
Blazynski, T. Z. In: Encyclopedia of Composites, Ed. Stuart M. Lee, VCH Publ, New York, 1991.
Schwarz, R. B., Kasiraj, P. and Vreelano, T. Jr In Ref. 7, p. 313.
Wilkins, M. L., Kusubov, A. S. and Cline, C. F. In Ref. 7, p. 57.
Linse, Vonne D. In Ref. 7, p. 29.
Lotrich, V. F., Akashi, T. and Sawaoka, A. In Ref. 7, p. 277.
Hoenig, C., Holt, A., Finger, M. and Kuhl, W. In Proc. 6th HERF Conf, Ed. R. Prummer, Haus der Technik, Essen, Paper 6.3, 1977.
Lee, Y. K., Williams, F. L., Graham, R. A. and Morosin, B. J. Mater. Sci., 20 (1985), 2488.
Graham, R. A., Morosin, B., Venturini, E. L. and Carr, M. J. Ann. Rev. Mater. Sci., 1986.
Somiya, S., Yoshimura, M., Fujiwara, S., Konoo, K. and Sawaoka, A. Proc. Am. Ceram. Soc. 85th Annual Meeting (Basic Sci. Div. No. 135-B-83), 1983, pp. C51–C52.
DE Carli, P. S., Bult. Am. Phys. Soc., 12 (1967), 1127.
DE Carli, P. S. and Jamieson, J. C. Science, 133 (1961), 821.
DE Carli, P. S. US Patent No. 3238019.
Cowan, G., Bruce, N., Dunnigton, W. and Holtzman, A. US Patent No. 3 401 019.
Murr, L. E. and Stauohammer, K. P. In Ref. 17, p. 441.
Bergmann, O. R., In: Proc. 7th HERF Conf., Ed. T. Z. Blazynski, University of Leeds, 1981,p. 142.
Balchan, A. S. and Cowan, G. R. US Patent No. 3 851 027.
Graham, R. A., Morosin, B., Horie, Y., Venturini, E. L., Boslaugh, M., Carr, M. J. and Williamson, D. C. In: Shock Waves in Condensed Matter, Ed. Y. M. Gupta, Plenum Publishing Corporation, New York, 1986.
Horiguchi, Y. and Nomura, Y. J. Less-Common Metals, 11 (1966), 378.
Roman, O. V. and Gorabtsov, V. G. In Shock Waves and High Strain Rate Phenomena in Metals, Eds M. A. Meyers and L. E. Murr, Plenum Press, New York, 1980.
Linse, Vonne D. In: Proc. of the Saga more Army Materials Research Conf on Innovations in Materials Processing, Vol. 30, Plenum Press, New York, London, 1985, p. 381.
Hermann, W, J. Appl. Phys., 40 (1969), 2490.
Cooper, A. R. and Eaton, L. E. J. Am. Ceram. Soc., 45 (1962), 97.
VAN Der Zwan, J. and Siskens, C. A. M. Powder Technol., 33 (1982),43.
Schwarz, R. B., Kasiraj, P., Vreelano, T. Jr and Ahrens, T. J. In: Shock Waves in Condensed Matter-1983, Eds J. A. Assay, R. A. Graham and G. K. Straub, Elsevier Science Publishers B.V., Amsterdam, 1984, p. 435.
Schwarz, R. B., Kasiraj, P., Vreelano, T. and Ahrens, T. J. Acta Metall., 32 (1984), 1243.
Wilkins, M. L. In: Impact Loading and Dynamic Behaviour of Materials, Eds C. Y. Chiern, H. D. Kunze and L. W. Meyer, DGM Informationgesselschaft Verlag, Oberursel, FRG, 1988, p. 965.
Roman, O. V. In: Modern Developments in Powder Metallurgy, Vol. 6, Eds H. H. Hausner and W. E. Smith, American Powder Metallurgy Institute, New Jersey, 1973.
Raybould, D. In: Proc. 15th MTDR Conf., Eds S. A Tobias and F. Koenigsberger, Macmillan Press, London, 1975.
La Rocca, E. W. and Pearson, J. Rev. Sci. Instr., 29 (1958), 848.
Brejcha, R. J. and McGee, S. W. Am. Mach., 106 (1962), 63.
Hagemeyer, J. W. and Regalbuto, J. A Int. J. Powder Metall., 4 (1968), 19.
Bogdanov, A. P., Lazarev, A. S., Roman, O. V. and Furs, V. Ya. Sov. Powder Metall. Met. Ceram., 7 (1973), 543.
Bogdanov, A. P., Lazarev, A. S., Roman, O. V. and Furs, V. Ya. Ibid., 11 (1973), 880.
Akashi, T., Lotrich, A., Sawaoka, A. B. and Beauchamp, E. K. J. Am. Ceram. Soc., C-322 (1985).
Sawaoka, A. B. In Ref. 17, p. 380.
Graham, R. A. In: High Pressure Explosive Processing of Ceramics, Eds R. A Graham and A. B. Sawaoka, Trans. Tech. Publ., Switzerland, Germany, UK and USA, 1987, p. 27.
Carr, J. M. Ibid., p. 341.
McKenna, P. M., Redmond, J. C. and Smith, E. N. US Patent No. 2 648 125.
Roman, O. V., Gorobtsov, T. V., Tarasov, G. D. and Shekgov, V. I. In Ref. 44, 12 (1973), 293.
Vityaz, P. A and Roman, O. V. In Proc. 13th MTDR Cont, Eds S. A. Tobias and F. Koenigsberger, Macmillan Press, Landon, 1973.
Roman, O. V. and Gorobtsov, V. G. In Ref. 17, p. 335.
Al-Hassani, S. T. S. In Ref. 23, Paper 4.2.
Kiyoto, K. J. Ind. Explosive Soc. Japan, 37 (1976), 152.
Leonard, R. W., Batelle Tech. Rev., 179 (1968), 13.
Leonard, R. W., Laber, D. and Linse, Vonne D. Proc. 2nd HERF Conf., University of Denver, Colorado, Paper 8.3, 1969.
Hoenig, C. L. and Yust, C. S. Ceram. Bull., 60 (11) (1981).
Peng, T. C., Sastry, S. M. L. and O’Neal, J. E. In: Powder Metallurgy-Vol. 16, Eds E. N. Aqua and C. I. Whitman, Metal Powder Industries Federation, American Powder Metallurgy Institute, NJ, 1984, p. 523.
Chiba, A., Nishida, M., Yamaguchi, T. and Tosaka, J., Scripta Metall., 22 (1988), 213.
Muhanna, A. H. PhD thesis, University of Leeds, 1990.
Blazynski, T. Z. and Muhanna, A. H. In: Proc. 10th HERF Conf., Litostroj, Ljubljana, Yugoslavia, 1989, p. 58.
Hegazy, A. A. and Blazynski, T. Z. Inf. J. Impact Engng, 6 (1987), 63.
Wolf, H. In: Proc. 9th HERF Conf., USSR Academy of Sciences, Siberian Division, 1987, p.188.
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 1992 Elsevier Science Publishers Ltd
About this chapter
Cite this chapter
Blazynski, T.Z. (1992). Particulate Matter Composites. In: Dynamically Consolidated Composites: Manufacture and Properties. Springer, Dordrecht. https://doi.org/10.1007/978-94-011-2892-6_6
Download citation
DOI: https://doi.org/10.1007/978-94-011-2892-6_6
Publisher Name: Springer, Dordrecht
Print ISBN: 978-1-85166-609-6
Online ISBN: 978-94-011-2892-6
eBook Packages: Springer Book Archive