Abstract
In the first part we describe the use of 3D X-ray microtomography for the analysis of density distributions inside and between cold pressed green state whisker reinforced Si3N4 / Si3N4 bending test specimens. The differences between a changing content of whisker volumes (0 to 35 %) show a sharp density reduction between 10 and 15 %. This agrees with previous research which shows that maximum density is achieved between 10 and 15 % whisker loadings. Since density is directly related to fracture strength, microtomography may be useful as strength prediction.
In the second part we describe the use microtomography combined with image processing, especially a 2D FOURIER transform, for the analysis of cloth direction distributions in multidirectional reinforced chemical vapor infiltrated (CVI) SiC / SiC test components. The SiC fibers were NICALON™ and were oriented 30, 60, and 90°. In laying up the cloth, orientations may not be maintained and this impacts the mechanical properties. Use of microtomography with image processing may allow mechanical property variations to be established.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Rice, R.W: “Toughening in ceramic particulate and whisker composites”, Ceram. Eng. Sci. Proc. 11 [7-8] (1990) pp. 667–694
Ellingson, W.A, Vannier, M.W and Stinton, D.P: “Application of X-ray computed tomography to ceramic/ceramic composites” Symp. on characterization of advanced materials, Monterey, CA (1987)
Engler, PH, Friedman, W.O, Skarpness, B.O and Ohnsorg, R: “Process control for ceramics using CT of prefired and fired parts”, Conf. on NPE of modern ceramics, ASNT, Columbus, OH (1990) pp. 16–20
Yancey, R.N, Klima, S.J and Smith, J.A: “High resolution CT of modern ceramics”, Cont. on NPE of modern ceramics, ASNT, Columbus, OH (1990) pp. 126–130
Reiter, H, Maisl, M, Pangraz, S and Arnold, W: “High resolution X-ray and ultrasonic methods for the nondestructive evaluation of modern ceramics”, Conf. on NOE of modern ceramics, ASNT, Columbus, OH (1990) pp. 64–68
Rizo, PH, Grangeat, P, Sire, P, Lemasson, P and melennec, P: “Comparison of two 3D X-ray cone beam reconstruction algorithms with circular trajectory”, to be published, J. Opt. Soc. Amer.
Dieckman, S.L, rizo, P and Gopalsami, N: “3D NMR and X-ray imaging of solid state materials” in “Advanced tomographic imaging methods for the analysis of materials”, Mat Res Soc. Symp. Proc. Series Vol. 17 (1990)
Stinton, P.O, Caputo, A.J and Lowden R.A: “Synthesis of fiber-reinforced SiC composites by CVI”, Amer. Ceram. Soc. Bull. 65 [2] (1986) pp. 326–335
Kodama, H and Miyoshi, T: “Fabrication and properties of Si3N4 composites reinforced by SiC whiskers and particles”, Ceram. Eng. Sci. Proc. 10 [9-10] (1989) pp. 1072–1082
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1992 Elsevier Science Publishers Ltd and MPA Stuttgart
About this chapter
Cite this chapter
LÜthi, T., Ellingson, W.A. (1992). Analysis of Ceramic Composites by 3D Microtomography. In: Carlsson, R., Johansson, T., Kahlman, L. (eds) 4th International Symposium on Ceramic Materials and Components for Engines. Springer, Dordrecht. https://doi.org/10.1007/978-94-011-2882-7_97
Download citation
DOI: https://doi.org/10.1007/978-94-011-2882-7_97
Publisher Name: Springer, Dordrecht
Print ISBN: 978-1-85166-776-5
Online ISBN: 978-94-011-2882-7
eBook Packages: Springer Book Archive