Abstract
The study of viscoelastic properties of filled polymers is of important scientific and practical significance. We can argue here about the priority of the theoretical or applied approach to the problem, but one thing is certain: the filling of the polymer leads to practical purposes, extending the possibilities of its applications. Some of the questions concerning the creation of new filled polymeric compositions could probably be solved within the framework of applied investigation only. Nevertheless, it is quite obvious that a sufficiently full measure of generalization can be achieved only by using a set of data obtained by physicomechanical, thermodynamic, thermophysical, structural and other methods.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsPreview
Unable to display preview. Download preview PDF.
References
Lobe, V.M. and White, J.L.Polym. Eng. Sci., 19 (1979) 617.
Yanovsky, Yu.G., Vinogradov, G.V. and Barancheeva, V.V.Mekhanika Kompozit. Mater., no. 6 (1986) 1073.
Yanovsky, Yu.G., Vinogradov, G.V. and Barancheeva, V.V. Proceedings of the Second Conference of European Rheologists, 1986, Rheol. Acta, 26 (1988) 218.
Donnet, J.B. and Vidal, A.Zh. Vsesoyuzn. Khim. Obshestva im D.I.Mendeleeva, 31(1) (1986) 10.
Hinkelmann, B.Rheol. Acta, 20 (1981) 561.
Han, C.D., Van DerWeghe, T., Shete, P. and Haw, J.R.Polym. Eng. Sci., 21 (1981) 196.
Nakatsuka, T., Kawasaki, H., Itadani, K., et al. J. Appl. Polym. Sci., 27 (1982) 259.
Juskey, V.P. and Chaffey, C.E.Can. J. Chem. Sci., 60 (1982) 334.
Utracki, L.A. and Fisa, B.Polym. Composites, 3 (1982) 193.
Hinkelmann, B.Rheol. Acta, 21 (1982) 491.
Shenoy, A.V., Saini, D.R. and Nadkarni, V.M.Polym. Composites, 4 (1983) 53.
Shenoy, A.V. and Saini, D.R.Colloid. Polym. Sci., 261 (1983) 846.
Lem, K.W. and Han, C.D.J. Rheol. Acta, 27 (1983) 263.
Luo, H.L., Han, C.D. and Muovic, J. J.Appl. Polym. Sci., 28 (1983) 3387.
Kitano, T., Kataoka, T. and Nagatsuka, Y.Rheol. Acta, 23 (1984) 20.
Kitano, T., Kataoka, T. and Nagatsuka, Y.Rheol. Acta, 23 (1984) 408.
Hinkelmann, B. and Mennig, G.Chem. Eng. Comm., 36 (1985) 211.
Bretas, R.E.S. and Powell, R.L.Rheol. Acta, 24 (1985) 69.
Mitel, A.T. and Kamal, M.R.Polym. Composites, 1 (1986) 283.
Shenoy, A.V. and Saini, D.R.J. Reinf. Plastics Comp., 5 (1986) 62.
Nielsen, L.E.Mechanical Properties of Polymers and Composites, Marcel Dekker, New York, Vol. 2, 1974, Ch. 7, p. 379.
Han, C.D.Rheology in Polymer Processing, Academic Press, New York, 1976, Ch. 7, 182.
Nielsen, L.E.Polymer Rheology, Marcel Dekker, New York, 1977, Ch. 9, 133.
Paul, D.R. and Newmann, S.Polymer Blends, Academic Press, New York, Vol. 1, 1978, Ch. 7, 295.
Donne, J.B. and Voet, A.Carbon Black, Marcel Dekker, New York, 1976.
Kirk-Othmer. Encyclopedia of Chemical Technology, 3rd ed., Elastomers, Synthetic (Nitrile Rubber). Wiley, New York, 1979, 534.
Nakajima, N., Harrell, E.R. and Seil, D.A. Rubber processing. In: Encyclopedia of Material Science and Engineering, Ed. M.B. Bever, Pergamon Press, New York, 1986.
Nakajima, N. and Harrell, E.R. In: Viscoelastic Characterization of Long Branching and Gel in Elastomers in Encyclopedia of Fluid Mechanics, Ed. N.P. Cheremisinoff, vol. 9, Gulf Publishing Co., Houston, TX, 1990.
Nakajima, N. and Collins, E.A.Rubber Chem. and Technol., 48 (1975) 615.
Dannenberg, E.M.Rubber Chem. and Technol., 48 (1975) 410.
O’Brien, J., Casshell, E., Wardel, G.E. and McBrierty, V.J.Rubber Chem. and Technol., 50 (1977) 747.
Dannenberg, E.M. Carbon black. In: Encyclopedia of Composite Materials and Components, Ed. M. Grayson, Wiley, New York, 1983, 230.
White, J.L. and Crowder, J.W.J. Appl. Polym. Sci., 18 (1974) 1013.
Serizawa, H., Ito, M., Kanamoto, T., Tanaka, K. and Nomura, A.Polymer J., 14 (1982) 149.
Serizawa, H., Ito, M., Kanamoto, T., Tanaka, K. and Nomura, A. Polymer J., 15 (1983) 201, 543.
Nakajima, N. and Scobbo, J.J., Jr.Rubber Chem. and Technol., 61 (1988) 137.
Tokita, N. and Plishkin, I.. Rubber Chem. and Technol., 46 (1973) 1166.
Song, H.J., White, J.L., Min, K., Nakajima, N. and Weissert, F.C.Adv. Polym. Tech., 8 (1988) 431.
Montes, S., White, J.L. and Nakajima, N. J.Non-Newtonian Fluid Mechanics, 28 (1988) 183.
Isono, Y. and Ferry, J.D.Rubber Chem. and Technol.57 (1984) 925.
Arai, K. and Ferry, J.D.Rubber Chem. and Technol.59 (1986) 592.
Shenoy, A.V. Rheology of highly filled polymer melt systems. In: Encyclopedia of Fluid Mechanics, Ed. N.P. Cheremisinoff, Gulf Publishing Co., Houston, TX, Vol. 7, Ch. 23, 1988.
Nakajima, N. and Harrel, E.R. Rheological behaviour of rubber carbon black compounds. In Encyclopedia of Fluid Mechanics, Ed. N.P. Cheremisinoff, Gulf Publishing Co., Houston, TX, Vol. 9, Ch. 8, 1990.
Yanovsky, Yu.G. and Zaikov, G.E. Rheological properties of filled polymers. In Encyclopedia of Fluid Mechanics, Ed. N.P. Cheremisinoff, Gulf Publishing Co., Houston, TX, Vol. 9, Ch. 7, 1990.
Lipatov, Yu.S.Fizicheskaya Khimia Napolnennych Polimerov (Physical Chemistry of Filled Polymers), Khimiya, Moscow, 1977.
Privalko, V.P., Besklubenko, Yu.D., Lipatov, Yu.S.et al. Vysokomol. Soed., 19A(8) (1977) 1744.
Howard, G.J. and Shanks, R.A.J. Macromol. Sci., 19(2) (1981) 167.
Lipatov, Yu.S., Demchenko, S.S. and Privalko, V.P.DAN SSSR, 273(1) (1983) 128.
Privalko, V.P., Lipatov, Yu.S. and Demchenko, S.S.Vysokomol. Soed., 28(6) (1986) 425.
Privalko, V.P.Fizikochimiya Mnogokomponentnych Polimernych Sistem (Physico-Chemistry of Polymer Multicomponent Systems), Naukova Dumka, Kiev, 1986.
Privalko, V.P., Novikov, V.V. and Yanovsky, Yu.G.Osnovy Teplofiziki i Reofiziki Polimernych Materialov (Principles of Thermophysics and Rheophysics of Polymer Materials), Naukova Dumka, Kiev, 1991.
Rebinder, P.A.Selected Works, Vol. 1, Nauka, Moscow, 1978;
Rebinder, P.A.Selected Works, Vol. 2, Nauka, Moscow, 1979 (in Russian).
Uriev, N.B.High Concentration Disperse Systems, Khimiya, Moscow, 1980 (in Russian).
Kraus, G. (Ed.)Reinforcement of Elastomers, Interscience, New York, 1965.
Manson, J.A. and Sperling, L.H.Polymer Blends and Composites, Plenum Press, New York, 1976.
Medalia, A.I.J. Colloid and Interface Sci., 24 (1967) 393.
Kraus, G.Rubber Chem. and Technol., 38 (1965) 1076.
Kraus, G., Rollman, V.W. and Gruver, I.T.Macromolecules, 3 (1970) 92.
Rivin, D., Aron, J. and Medalia, A.I.Rubber Chem. and Technol., 41 (1968) 330.
Sircar, A.K. and Voet, A.Rubber Chem. and Technol., 43 (1973) 973.
Kraus, G. and Gruver, I.T.J. Polym. Sci., A-2(8) (1970) 57.
Kraus, G.J. Appl Polym. Sci., 15 (1971) 1679.
Sambrook, R.W.Rubber Chem. and Technol., 44 (1971) 728.
Bigg, D.M.Polym. Eng. Sci., 22 (1982) 512.
Saini, D.R., Shenoy, A.V. and Nadkarni, V.M.Polym. Composites, 7 (1986) 193.
Sacks, M.D., Khadilkar, C.S., Scheiffele, G.W., Shenoy, A.V., Dow, J.H. and Sheu, R.S.Advances in Ceramics, 21 (1987) 495.
Bigg, D.B.Polym. Plast. Technol. Eng., 23(2) (1984) 133.
Saini, D.R., Shenoy, A.V. and Nadkarni, V.M.Polym. Eng. Sci., 25 (1985) 807.
Saini, D.R. and Shenoy, A.V.Polym. Eng. Sci., 26 (1986) 441.
Shenoy, A.V. and Saini, D.R.Polym. Composites, 1 (1986) 96.
Olmstead, B.A.SPE-J., 26 (1986) 96.
Bigg, D.M. Proceedings of the IX International Congress on Rheology in Mexico, Adv. in Rheology, 3 (1984) 429.
Plueddemann, E.P.Silane Coupling Agents, Plenum Press, New York and London, 1982.
Monte, S.J. and Sugerman, G. Kenrich Petrochemicals, Inc., Bayonne, NJ, 1985.
Cohen, L.B.SPE, Plastics Engineering, 29 November 1983.
Cohen, L.B.SPE ANTEC, paper 636, New Orleans, April 1984.
Cohen, L.B. The Adhesion Society, Savannah, GA, 24 February 1985.
Cohen, L.B. The chemistry and reactivity of zircoaluminate coupling agents for filled and reinforced plastics, SPI RP/C, Atlanta, GA, 27–31 January 1986.
Bigg, D.M.Polym. Eng. Sci., 23 (1983) 206.
Althouse, L.M., Bigg, D.M. and Wong, W.M.Plastics Compounding, March/April 1983.
Sharma, Y.N., Patel, R.D. and Dhimmar, I.H.J. Appl. Polym. Sci., 27 7(1982) 97.
Vinogradov, G.V., Yanovsky, Yu.G., et al. Vysokomol. Soed., 20A(11) (1978) 2403.
Yanovsky, Yu.G. and Vinogradov, G.V.Vysokomol Soed., 22A(11) (1980) 2567.
Yanovsky, Yu.G., Vinogradov, G.V. and Ivanova, L.I.Vysokomol. Soed., 24A(5) (1982) 1057.
Yanovsky, Yu.G., Vinogradov, G.V. and Ivanova, L.I.Inzhenerno-Fizicheskii Zh., 46(8) (1984) 974.
Yanovsky, Yu.G., Vinogradov, G.V. and Ivanova, L.I.Doklady Acad. Nauk SSSR, 282(5) (1985) 1190.
Ulianov, L.P., Yanovsky, Yu.G., et al. Zavodskaya Labor., 39(11) (1973) 1402.
Vinogradov, G.V., et al. Int. J. Polym. Mater., 2 (1972) 1.
Ahuja, S.K.In: Proc. II Int. Congr. Rheology, Plenum Press, New York, 1980, SD 2.6.3, p. 261.
Yanovsky, Yu.G., Zhdanyk, V.K., Zolotarev, A.V. and Vinogradov, G.V.Rheol. Acta, 27 (1988) 298.
Vinogradov, G.V., Yanovsky, Yu.G., et al. In: Proc. Int. Rubber Conf., Moscow, 1984, C, vol. 1, p. 19.
Havriliak, S. and Negami, S.Polymer, 8(4) (1967) 161.
Marin, G. Contribution à l’étude des propriétés viscoélastiques en régime linéaire du polystyrène à l’état fondu. Thèse pour obtenir le grade de docteur des sciences, Académie de Bordeaux, 1977.
Wisniewski, C., Marin, G. and Monge, Ph.Eur. Polym. J., 21 (1985) 479.
Iakobson, E.E. and Faitelson, L.A.Mekhanika Kompozit. Mater., 1 (1990) 146.
Kraus, G.Fortschr. Hochpolymere Forsch., B8 (1971) 156.
Casson, N. In: Rheology of Disperse Systems, Ed. C.C. Mill, Pergamon Press, London, 1959, p. 84.
Yanovsky, Yu.G., Vinogradov, G.V. and Barancheeva, V.V.Vysokomol. Soed., 28A(5) (1986) 983.
Smith, T.L.Trans. Soc. Rheol., 3 (1959) 113.
Reynolds, O.Phil. Mag., 20(5) (1885) 469.
Cogswell, F.N.Plast, and Polym., 41(151) (1973) 39.
Kirby, I.Rheol. Acta, 27(2) (1988) 326.
Goldstein, M.N.Mekhanicheskie Svoiistva Gruntov (Mechanical Properties of Soils), Stroiizdat, Moscow. Vol. 1, 1971, p. 368;
Goldstein, M.N.Mekhanicheskie Svoiistva Gruntov (Mechanical Properties of Soils), Stroiizdat, Moscow. vol. 2, 1973, p. 376.
Vinogradov, G.V., Malkin, A.Ya., Plotnikova, E.P., et al. Int. J. Polym. Mater., 2 (1972) 184.
White, J.L., Czarnecki, L. and Tanaka, H.Rubber Chem. and Technol., 53 (1980) 823.
Suetsugu, Y. and White, J.L.J. Appl. Polym. Sci., 28(4) (1983) 1481.
Glushlov, I.A., Vinogradov, G.V. and Rozhkov, V.A.Mekhanika Polimerov, 5 (1974) 902.
Suetsugu, Y. and White, J.L.J. Non-Newtonian Fluid Mechanics, 14 (1984) 121.
Hinch, E.J. and Leal, L.G.J. Fluid Mech., 52 (1972) 683.
Simha, R.A.J. Appl. Phys., 23 (1952) 1020.
Onogi, S. and Matsumoto, T.Polym. Eng. Rev., 1(1) (1981) 45.
Han, C.D.Multiphase Flow in Polymer Processing, Academic Press, New York, 1981.
Einstein, A.Ann. Phys., 19 (1906) 289;
Einstein, A.Ann. Phys.34 (1911) 591.
Lin, C.J., Perry, J.H. and Schowalter, W.R.J. Fluid Mech., 44 (1970) 1.
Jeffery, G.B.Proc. Roy. Soc, Ser. A., 102 (1922) 161.
Goldsmith, H.L. and Mason, S.G. In: Rheology Theory and Applications, Ed. F.R. Eirich, Vol. 4, Academic Press, New York, 1967, p. 85.
Brenner, H.Progress in Heat and Mass Transfer, Vol. 5, Pergamon Press, New York, 1972.
Leal, L.G. and Nihen, E.J.Rheol. Acta, 12 (1973) 127.
Mooney, M.J. Colloid Sci., 6 (1951) 162.
Thomas, D.G.J. Colloid Sci., 20 (1965) 267.
Lee, D.J.Trans. Soc. Rheol., 13 (1969) 273.
deGennes, P.G.Le Journal de Physigue, 40 (1979) 783.
Faitelson, L.A. and Kovtin, V.P.Mekhanika Polimerov, (N2) (1975) 326.
Kovtin, V.P. and Faitelson, L.A.Mekhanika Kompozit. Mater., (N4) (1990) 715.
Doi, M. and Edwards, S.F.J. Chem. Soc, Faraday Trans., part 2, (5) (1978) 918.
Doi, M. and Kuzuu, N.I.J. Polym. Sci., Polym. Phys. Ed., 18(3) (1980) 409.
Faitelson, L.A. and Yakobson, E.E.Mekhanika Kompozit. Mater. (N2) (1981) 277.
Faitelson, L.A. and Yakobson, E.E.Mekhanika Polimerov, (Nl) (1978) 172.
Vinogradov, G.V. and Malkin, A.Ya.Rheology of Polymers, Mir Publishers, Moscow, 1980.
Vinogradov, G.V., Malkin, A.Ya., Yanovsky, Yu.G., et al. J. Polym. Sci., Polym. Phys. Ed., A-2(10) (1972) 1061.
Yanovsky, Yu.G.L’actualité chimique, March-April 1991, 109.
Vinogradov, G.V. and Pavlov, V.P.Rheol. Acta, 1 (1961) 416, 455.
Vinogradov, G.V., Borisenkova, E.K. and Zabugina, M.P.DAN SSSR, 277(3) (1984) 614.
Faitelson, L.A.Int. J. Polym. Mater., 8(2–3) (1980) 207.
Borisenkova, E.K., Sabsaii, O.Yu., Kurbanaliev, M.K., et al., Polymer, 19 (1978) 1473.
Lipatov, Yu.S.Kolloidnaya Khimiya Polimerov (Colloid Chemistry of Polymers), Naukova Dumka, Kiev, 1984.
Vinogradov, G.V., Plotnikova, E.P., Zabugina, M.P., et al. Vysokomol. Soed., 29A(3) (1987) 211.
Dreval, V.E. and Vinogradov, G.V.Kolloid. Zk., 51(2) (1985) 237.
Meissner, J.J. Chem. Eng. Comm., 33(1) (1985) 159.
Borisenkova, E.K., Dreval, V.E., Vinogradov, G.V., et al. Polymer, 23(1) (1982) 91.
Vinogradov, G.V., Dreval, V.E., Borisenkova, E.K., et al. Vysokomol. Soed., 23A(12) (1981) 2627.
Bartenev, G.M. and Ermilova, N.V.Kolloid. Zh., 29(6) (1967) 771.
Gul’, V.E.Struktura i Protochnost’ Polimerov (Structure and Strength of Polymers), Khimiya, Moscow, 1978.
Bartenev, G.M.Protchnist i Mekhanizm Razruscheniya Polimerov (Strength and Fracture of Polymers), Khimiya, Moscow, 1984.
Vinogradov, G.V., Malkin, A.Ya., Volosevitch, V.V., et al. J. Polym. Sci., Polym. Phys. Ed., 13(9) (1975) 1721.
Vinogradov, G.V., Dreval, V.E. and Yanovsky, Yu.G.Rheol. Acta, 24 (1985) 574.
Smith, T.Polym. Sci., A-l (1963) 3597.
Optov, V.A., Borisenkova, E.K. and Sabsaii, O.Yu.Kolloid. Zh., 50 (1988) 1033.
Payne, A.R.Rubber Plastic Age, 42 (1961) 963.
Payne, A.R.J. Appl. Polym. Sci., 3 (1960) 127.
Faitelson, L.A.Izvestiya Akad. Nauk Latvii, (N3) (1965) 42.
Faitelson, L.A.Mekhanika Polimerov, (Nl) (1969) 182.
Faitelson, L.A.Mekhanika Polimerov, (Nl) (1978) 113.
Faitelson, L.A.Mekhanika Polimerov, (N7) (1976) 146.
Faitelson, L.A. and Alekseenko, A.I.Mekhanika Polimerov, (N3) (1970) 558.
Faitelson, L.A., Leonov, A.I. and Tshiprin, M.G.Mekhanika Polimerov, (N3) (1970) 521.
Faitelson, L.A., Tshiprin, M.G. and Briedis, D.B.Plasticheskie Massy, (N9) (1970) 38.
Tshiprin, M.G. and Faitelson, L.A.Mekhanika Polimerov, (N4) (1969) 561.
Yakovlev, Yu.P. and Briedis, I.P.Mekhanika Polimerov, (N3) (1969) 561.
Payne, A.R.J. Appl. Polym. Sci., 6 (1960) 368.
Yanovsky, Yu.G., Vinogradov, G.V. and Dreval, V.E.Trans. CSME, 8(2) (1984) 84.
Mosiichin, E.P. and Vinogradov, G.V.Kolloid. Zh., 19 (1957) 311.
Han, C.D.Multiphase Flow in Polymer Processing, Academic Press, New York and London, 1981.
Suetsugu, Y. and White, J.J. Appl. Polym. Sci., 28 (1983) 1481.
Teteris, G.G. and Briedis, I.P.Mekhanika Kompozit. Mater., (N3) (1989) 514.
Teteris, G.G.Mekhanika Kompozit. Mater., (N4) (1990) 715.
Briedis, I.P. and Teteris, G.G.Proc. Vth Nat. Conf. on Mechanics and Technol. Composites, Varna-Sofia, Acad. Sci. of Bulgaria Publishers, 1988, p. 54.
Gevorgyan, A.M., et al. Technology of Chemical Polymers, Proc. Vinogradov, G.V.NITI, Moscow, 1980, 3233–80.
Yanovsky, Yu.G., Vinogradov, G.V., Gevorgyan, A.M., et al. Vysokomol. Soed., 28(11) (1985) 2385.
Fridman, M.M., Popov, V.L., et al. Doklady Akad. Nauk SSSR, 255(5) (1980) 1185.
Cox, W.P. and Merz, E.H.J. Polym. Sci., 8 (1958) 619.
Vinogradov, G.V., Yanovsky, Yu.G. and Isaev, A.I.J. Polym. Sci., 8 (1970) 1239.
Yanovsky, Yu.G. In: Theoretical and Instrumental Rheology, Ed. P. Rebinder). Proc. Inst. Heat Mass Transfer, Minsk, 1970, p. 119.
Vinogradov, G.V., Yanovsky, Yu.G. and Frenkin, E.I.R Rheol. Acta, 7(3) (1968) 277.
Bartenev, G.M.Struktura i Relaksatsionnye Svoiistva Elastomerov (Structure and Relaxation Properties of Elastomers), Khimiya, Moscow, 1979.
Aivazov, A.B. and Zelenev, Yu.V.Zavodskaya Labor., 34(6) (1968) 750.
Ligidov, M.H., Cobzar, Yu.N., Yanovsky, Yu.G., et al. Kompozit. Polimernye Mater., 4 (1989) 215.
Tobolsky, A.V.Properties and Structure of Polymers, Wiley, New York, 1960.
Ferry, J.D.Viscoelastic Properties of Polymers, 3rd ed., Wiley, New York, 1980.
Gul’, V.E., Yanovsky, Yu.G., et al. Doklady Akad. Nauk SSSR, 294(4) (1987) 905.
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 1993 Springer Science+Business Media Dordrecht
About this chapter
Cite this chapter
Yanovsky, Y.G. (1993). Rheological and Relaxation Properties of Filled Polymers. In: Polymer Rheology: Theory and Practice. Springer, Dordrecht. https://doi.org/10.1007/978-94-011-2116-3_5
Download citation
DOI: https://doi.org/10.1007/978-94-011-2116-3_5
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-010-4938-2
Online ISBN: 978-94-011-2116-3
eBook Packages: Springer Book Archive