Abstract
High thermal shock resistance, fracture toughness, high-temperature strength, optimal tribological characteristics, chemical and erosion stability at a low density - such is a list, far from complete, of properties that should be offered by modern materials to provide serviceability of assemblies and mechanisms under extreme conditions of high temperatures, thermomechanical loads, erosion wear, corrosive environments, etc. An ever-wider application for such operating conditions is found by ceramic materials [1].
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
References
References
Hilling W. (1987) Strength and toughness of ceramic matrix composites. Annual Review of Materials Science, 17, 341–83.
Berezhnoj A. I. (1976) Glass Ceramics and Photoglass Ceramics, Mashinostroenie, Moscow.
Strnad Z. (1989) Glass-ceramic Materials. Strojizdat, Moscow.
Prewo K. M. (1987) Glass and ceramic matrix composites: present and future. Materials Research Soc., 120, 145–6.
Rutkovskij A. E., Ivashin A. A., Alekseenko I. P. et al. (1990) Technology of structural glass ceramics-based reinforced composites. Abstract of Reports to Moscow Int. Conf. on Composites, Moscow, Part 2, pp. 78–9.
Kohuo Tohree and Nishino Yoshio. (1981) Development of sintered bearings for high speed revolution applications. Mod. Dev. Powder Met., 12 (7), 855–70.
Walton J. and Corbett W. (1965) Metal fibre reinforced ceramics, in Fiber Composite Materials, Metals Park, Ohio.
Frantsevich I. N., Karpinos D. M., Rutkovskij A. E. et al. (1986) Tungsten-and molybdenum-based fibrous materials with oriented structure. Proc. of First All-USSR Conf. on Precipitation-hardened and Fibrous Materials. Kiev, pp. 13–25.
Savitskij E. M. and Burkhanov G. S. Physical Metallurgy of Refractory Metals and Alloys, Nauka, Moscow.
Gross R. (1972) FRG Patent No. 2,103,798. Attrition-, Impact-, and Corrosion-Resistant Material from Glass with Steel Inserts. Publ. 3 Aug.
Donald I. W. and McMillan P. W. (1977) The influence of internal stresses on mechanical behavior of glass-ceramic composites. J. Mater. Sci., 12, 290–8.
Karpinos D. M., Tuchinskij L. I., and Vishnjakov L. R. (1977) New Composite Materials, Vyshcha Shkola, Kiev.
Dalidovich A. S. (1970) Fundamentals of Knitting Theory, Legkaja Industrija, Moscow.
Ivashin A. A., Rutkovskij A. E. and Borshchevskij D. F. (1987) Hot pressing as method for producing technical glass-based reinforced composites, in Manufacturing Technology and Properties of Powder Composites, Penza, PP. 3–7.
Samsonov G. V. and Kovalchenko M. S. (1962) Hot Pressing, Gos. Izd. Tekhn. Literatury, Kiev.
Karpinos D. M., Tuchinskij L. I. et al. (1976) Sintering of two-phase composites with nondeformable inclusions. Poroshkovaja Metallurgija, 7, 29.
Dorofeev J. G. (1972) Dynamic Hot Pressing in Cermet Technology, Metallurgija, Moscow.
Jones W. D. (1960) Fundamental Principles of Powder Metallurgy, Edward Arnold, London.
Tykachinskaja P. D., Budov V. V. and Khodakovskaja R. J. (1990) Effect of reinforcing fiber content on process of fracture of composites, in Abstracts of Reports to Moscow Int. Conf. on Composites, Moscow, Part 2, p. 194.
Cuper G. A. (1974) Micromechanical aspects of fracture, in Composite Materials, vol. 5, Fracture and Fatigue, (ed. Brouton L. I.), Academic Press, New York and London.
Rutkovskij A. E., Aleksenko I. P., Ivashin A. A. et al. (1988) Structure, strength and thermophysical properties of glass ceramics reinforced with continuous inorganic fibers, in Application of Composites in Mechanical Engineering, Minsk, pp. 170–1.
Rutkovskij A. E., Ivashin A. A. and Dzeganovskij V. P. Study of interaction between metallic fibers and glass-ceramic matrix after high-temperature annealings. Poroshkovaja Metallurgija, (in press).
Masahiro Ashizuka, Yoshinori Aimoto and Masahiro Watanabe. (1989) Mechanical properties of SiC whisker reinforced glass ceramic composites. J. Ceram. Soc. Jap., Int. Ed., 97, 789–90.
Antsiferov V. N., Sokolkin Ju. V., Pashkinov A. A. et al. (1990) Titanium-based Fibrous Materials, Nauka, Moscow, pp. 11–14.
Tykachinskaja P. D., Budov V. V., and Khodakovskaja R. J. (1990) Glass sintering and crystallization processes in hot pressing, in Modern Problems of Powder Metallurgy, Ceramics, and Composites, Institute for Materials Science Problems, Ac. Sci. Ukr. SSR, Kiev, pp. 61–4.
Khodakovskaja R. J. (1989) Glass-ceramic materials with reaction-formed structure. Steklo i Keramika, 6, 36–9.
Frolov G. A., Polezhaev J. V., Pasichnyj V. V. and Zakharov F. I. (1981) Investigation of parameters of failure of thermomagnetic materials under nonstationary heating conditions. Inzhenerno-Fizicheskij Zhurnal, 40, 608–14.
Aleksenko I. P., Podsosonyj V. V., Pasichnyj V. V. et al. (1988) Impact of cyclic thermal loads on structure and properties of reinforced glass ceramics, in Application of Composites in Mechanical Engineering, Minsk.
Rutkovskij A. E., Chekhovskij A. A. and Aleksenko I. P. Investigation of chemical stability of reinforced glass ceramics. Poroshkovaja Metallurgija, in press.
Rutkovskij A. E., Ivashin A. A., Artjukhova S. G. and Aleksenko I. P. (1979) Study of impact of reinforced glass ceramic-based structure on its physicomechanical properties, in Real Structure of Inorganic High-Temperature Materials, Pervourlask, p. 291.
Ganz S. N. and Parkhomenko V. D. (1965) Antifriction Chemically Stable Materials in Mechanical Engineering, Mashinostroenie, Moscow.
Khodakovskaja R. J., and Tamm D. (1989) Mullite glass-ceramic materials based on magnesia aluminosilicate glasses-corundum compounds. Proc. of D. I. Mendeleev MKhTI, 157, 67–75.
Levi E. A., Khodakovskaja R. J., Pobedimskaja E. A, and Belov N. V. (1980) Radiographic measurement of microstresses in glass-ceramic materials. Dokl. AN SSSR, 255(3), 572–7.
Levi E. A., Khodakovskaja R. J. and Rudenko L. V. (1989) Radiographic determination of microstress relaxation degree and its relation to strength of glass-ceramic materials. Izv. AN SSSR, Neorg. Mater., 25, 496–501.
Khodakovskaja R. J., Baschenko J. V. and Gertsman A. F. (1987) Effect of glassy phase composition on fine structure of crystals and mechanical properties of MgO-Al2O3-SiO2 system glass ceramics. Proc. of D. I. Mendeleev MKhTI, 146, 117–26.
Rice R. W. (1981) Mechanisms of toughening in ceramic matrix composites. Ceram. Eng. Sci. Proc., 2(7–8), 661–701.
Borom, R. W. and Johnson C. A. (1987) Thermomechanical mismatch in ceramic fibre reinforced glass-ceramic composites. J. Amer. Ceram. Soc., 70 (1), 1–8.
Desmukh U. V., Kanei A., Freiman S. W. and Craumer D. C. (1988) Effect of thermal expansion mismatch on fiber pull-out. Materials Research Soc., 120, 253–8.
Further Reading
Karpinos D. M. (ed.) (1985) Composites, Naukova Dumka, Kiev, pp. 212–4.
USSR Inventor’s Certificate No. 623, 843. Ceramic Material. Karpinos D. M., Rutkovskij A. E., Kondratjev Ju. V., Ivashin A. A. et al. Publ. in Otkrytija. Izobretenija, 1978, No. 34, p. 71.
Rutkovskij A. E., Aleksenko I. P., Chekhovskij A. A., Furman V. V. Plant for Powder Application to Continuous Fibers, in press.
Rutkovskij A. E., Chekhovskij A. A., Ivashin A. A. et al. Investigation of corrosion, mechanical, and thermophysical characteristics of reinforced glass ceramics at one-sided cyclic radiant heating. Poroshkovaja Metallurgija,in press.
Kulik O. P., Denisenko E. T. and Krot O. I. (1985) High-temperature structural ceramics: manufacture and properties. Preprint No. 2, Institute for Materials Science Problems, Ac. Sci. Ukr. SSR, Kiev.
Nazarenko N. D., Juga A. I. et al. (1973) Effect of metallic fillers on friction properties of glass ceramics. Poroshkovaja Metallurgija, 7, 51–4.
Nazarenko N. D., Juga A. I., Kolesnichenko L. F. et al. (1980) Investigation of friction properties of glass ceramic-metallic filler composites. Poroshkovaja Metallurgija, 7, 75–89.
Catalogue of Engineering Glass Ceramics, (1967) Moscow.
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1995 Springer Science+Business Media Dordrecht
About this chapter
Cite this chapter
Rutkovskij, A.E., Sarkisov, P.D., Ivashin, A.A., Budov, V.V. (1995). Glass ceramic-based composites. In: Trefilov, V.I. (eds) Ceramic- and Carbon-matrix Composites. Soviet Advanced Composites Technology Series, vol 2. Springer, Dordrecht. https://doi.org/10.1007/978-94-011-1280-2_2
Download citation
DOI: https://doi.org/10.1007/978-94-011-1280-2_2
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-010-4558-2
Online ISBN: 978-94-011-1280-2
eBook Packages: Springer Book Archive