Abstract
Prepregs – semifinished products of polymeric composite materials (SPPCM) – present a system of fibrous fillers organized in a certain way and combined with polymeric binders. They are used for manual or mechanized (laying out, winding) assembly (forming) of blanks (piles) with a designer-specified scheme of fibrous filler orientation, with configuration close to that of the final part, which are then shaped into the part by pressing, vacuum, pneumatic, autoclave or thermocompression methods or by pultrusion.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Vinogradova, V.M. and Golovkina, G.S., eds, Handbook on Plastic Processing Techniques. Khimiya, Moscow 1980.
Babaevsky, P.G., ed., Handbook of Polymer Materials. Khimiya, Moscow, 1980.
Tsyplakov, O.G., Scientific Foundation of Fibre Composite Techniques, Vol. 1. Permskoye kmizjnoyeizdatelstvo, 1974.
Shalun, G.B. and Surzjenko, E.M., Laminated Plastics. Khimiya, Leningrad, 1978.
Trostyanskaya, E.B., ed., Plastics for Structural Purposes (Thermosetting Plastics). Khimiya, Moscow, 1974.
Chermyak, K.I., Epoxy Compounds and Their Application. Sudostroyeniye, Leningrad, 1978.
Kozulin, N.A., Shapiro, A.Y. and Gavurina, R.K., Equipment for Plastics Production and Processing. Khimiya, Leningrad, 1967.
Askadsky, A.A. and Matveev, Y.I., Chemical Structure and Physical Properties of Polymers. Khimiya, Moscow, 1983.
Abramzon, A.A. and Schukina, E.D., eds, Surface-Effect and SurfaceActive-Substance Handbook. Khimiya, Leningrad, 1984.
High-Strength Reinforcing Fibres (Obzornaya informatsiya. Ser. Promyshlenost khimicheskih volokon). NIITEHIM, Moscow, 1983.
Zjigach, A.F. and Tsirlin, A.M., Physico-mechanical properties and strength characteristics of boron filaments, and their application. Zhurnal VKhO im. D. I. Mendeleeva, 23 (1978) 264–72.
Konkin, A.A. and Konkina, N.F. Mechanical and physico-chemical properties of carbon fibres. Zhurnal VKhO im. D. I. Mendeleeva, 13 (1978) 259–63.
Alperin, V.I., Korolkov, N.V. and Motavkin, A.V., Structural Glass-Fibre Plastics. Khimiya, Moscow, 1979.
Perepyolkin, K.E., Structure and Properties of Fibres. Khimiya, Moscow, 1965.
Hodokovsky, M.D., ed., Production of Glass Fibres and Fabrics. Khimiya, Moscow, 1973.
Textile Carbon-Fibre-Based Materials and Methods of Property Definition (Obzornaya informatsiya. Ser. Promyshlenost khimicheskih volokon). NIITEHOM, Moscow, 1985.
Aslanova, M.S., ed., Glass Fibres,Khimiya, Moscow, 1979.
Talvik, R.Y. and Levin, A.N. Analysis of some glass filler fabricating characteristics. Plasticheskiye massy, 4, (1966) 51–8.
Kalnin, I.L., Carbon-fibre surface, its modification and effect on high-modulus carbon-fibre plastic fracture. Mekhanika kompozitsionnyh materialov, 3 (1979) 379.
Churaev, N.V., Surface-forces effect on fluid movement in porous media. In Uspekhi kolloidnoi khimii. Nauka, Moscow, 1973, p. 78.
Tendler, V.M., Investigation of impregnation procedures during glass-fibre plastic product fabrication. Plasticheskiye massy, 10 (1963) 24–9.
Deryagin, B.A. and Levi, I.M., Theory of Solution Application on a Moving Substrate. Khimiya, Moscow, 1965.
Golovkin, G.S., Match of fiber fillers with thermoplastic binders: a review. Plasticheskiye massy, 12 (1984) 23–6.
Kalinchev, E.L. and Sakovtseva, M.B., Properties and Processing of Thermoplastics: A Handbook. Khimiya, Leningrad, 1983, pp. 82–6.
Golovkin, G.S., Dmitrenko, V.P. et al., Structural polycaproamide-based materials with carbon fillers. Plasticheskiye massy, 12 (1986) 26–8.
Golovkin, G.S., Fibre technique of linear polymer processing. In Sbornik: Nauchno-tekhmicheskiye dostizjeniya v oblasti napolnennyh plastikov,primenyaemyh v mashinostroenii. MDNTP, Mosco, 1987, pp. 98–104.
Golovkin, G.S. and Rbykina, E.G., Textile semi-finished product design on the basis of product design and production requirements. Sbornik referatov NIOKR, obzorov, perevodov i deponirov. rukopisei. VIMI, 1985, Ser. XII, No. 5, DN 1082.
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1995 Springer Science+Business Media Dordrecht
About this chapter
Cite this chapter
Vinogradov, V.M., Golovkin, G.S., Gorokhovich, A.I., Grechishkin, V.A., Tikhonov, A.I. (1995). Technology for prepreg production of semifinished products of polymeric composite materials. In: Bratukhin, A.G., Bogolyubov, V.S. (eds) Composite Manufacturing Technology. Soviet Advanced Composites Technology Series, vol 1. Springer, Dordrecht. https://doi.org/10.1007/978-94-011-1268-0_2
Download citation
DOI: https://doi.org/10.1007/978-94-011-1268-0_2
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-010-4553-7
Online ISBN: 978-94-011-1268-0
eBook Packages: Springer Book Archive