Abstract
Strain localization in ductile metals subjected to cyclic deformation is a commonly observed feature which can be regarded as the first sign of fatigue damage. Cyclic strain localization can occur in different forms, e.g. in persistent slip band (PSBs), at notches at the free surface, at the tips of propagating cracks, at precipitate-free zones (PFZs), at grain boundaries or at pores at or just below the surface. In this paper, these forms of cyclic strain localization will be discussed with reference to their thresholds and the responsible microstructural mechanisms in terms of the slip modes in single- and multiphase mono- and polycrystals. In particular, the irreversible cyclic slip mechanisms responsible for the evolution of fatigue damage will be considered.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Mughrabi, H. (1985) in Dislocations and Properties of Real Materials, Book No. 323, The Institute of Metals, London, p. 244.
Laird, C. (1983) in F.R.N. Nabarro (ed.), Dislocations in Solids, Vol. 6, North-Holland Publishing Company, p. 1.
Neumann, P. (1983) in R.W. Cahn and P. Haasen (1983), Physical Metallurgy, Chapter 24, Elsevier, p. 1554.
Brown, L.M. (2000) Special Issue in Honour of Prof. T. Mori, Mater. Sci. Eng. A, 285, 35.
Laird, C. (1999) in J.B. Bilde-Sørensen et al. (eds.), Proc. of 20th RisØ International Symposium on Materials Science: Deformation-Induced Microstructures: Analysis and Relation to Properties, RisØ National Laboratory, Roskilde, Denmark, p. 85.
Basinski, Z.S. and Basinski S.J. (1992) Progress in Materials Science 36, 89.
Lukáš, P. (1998) in K.T. Rie and P.D. Portella (eds.), Proc. of 3 rd Int. Conf. on Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials, Elsevier Science Ltd., p. 267.
Thompson, N., Wadsworth, N. and Louat, N. (1956) Phil. Mag 1, 113.
Bretschneider, J. and Holste, C. (1998) in J.V. Carstensen et al. (eds.), Proc. of 19th Ris0 Int. Symp. on Materials Science: Modelling of Structure and Mechanics of Materials from Microscale to Product, RisØ National Laboratory, Roskilde, Denmark, p. 25.
Holzwarth, U. and Essmann, U. (1994) Appl Phys. A58, 197.
Mughrabi, H., Ackermann, F. and Herz, K. (1979) in J.T. Fong (ed.), Fatigue Mechanisms, ASTM STP 675, p. 69.
Mughrabi, H., Wang, R., Differt, K. and Essmann, U. (1983), in J. Lankford et al. (eds.), Fatigue Mechanisms: Advances in Quantitative Measurement of Physical Damage, ASTM STP 811, p. 5.
Mughrabi, H. and Wang, R. (1981) in N. Hansen et al. (eds.), Proc. of 2nd RisØ Int. Symposium on Metallurgy and Materials Science: Deformation of Polycrystals, Mechanisms and Microstructures, RisØ National Laboratory, Roskilde, Denmark, p. 87.
Wilhelm, M. and Everwin, P. (1979) in P. Haasen et al. (eds.), Proc. of 5 th Int. Conf on the Strength of Metals and Alloys (ICSMA 5), Vol. 2, Pergamon Press, p. 1089.
Hong, S.I. and Laird, C. (1991) Fatigue Fract. Engng. Mater. Struct. 14, 143.
Lukáš, P., Kunz, L. and Krejči, J. (1992) Mater. Sci. Eng. A, 158, 177.
Lee, J.-K. and Laird, C. (1983) Phil. Mag. A, 47, 579.
Wang, R. and Mughrabi, H. (1984) Mater. Sci. Eng. 63, 147.
Schwab, A., Meissner, O. and Holste, C. (1998) Phil. Mag. Letters 77, 23.
Hollmann, M., Bretschneider, J. and Holste, C. (2000) Cryst. Res. Technol. 35, 479.
Wilson, D.V. and Tromans, J.K. (1970) Acto metall. 18, 1197.
Pohl, K., Mayr, P. and Macherauch, E. (1980) Scripta metall 14, 1167.
Calabrese, C. and Laird, C. (1974a) Mater. Sci. Eng. 13, 141.
Calabrese, C. and Laird, C. (1974b) Mater. Sci. Eng. 13, 159.
Wilhelm, M. (1981) Mater. Sci. Eng. 48, 91.
Mughrabi, H. (1983) in J.B. Bilde-Sørensen et al. (eds.), Proc. of 4th RisØ Int. Symp. on Metallurgy and Materials Science: Deformation of Multi-Phase and Particle-Containing Materials, RisØ National Laboratory, Roskilde, Denmark, p. 65.
Stoltz, R.E. and Pineau, A.G. (1978) Mater. Sci. Eng. 34, 275.
Clavel, M. and Pineau, A. (1982) Mater. Sci. Eng. 55, 157.
Obrtlik, K., Lukas, P. and Polàk, J. (1998) in K.T. Rie and P.D. Portella (eds.), Proc. of 3 rd Int. Conf. on Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials, Elsevier Science Ltd., p. 33.
Essmann, U., Goesele, U. and Mughrabi, H. (1981) Phil. Mag. A, 44, 405.
Bayerlein, M. and Mughrabi, H. (1992) in K.J. Miller and E.R. de los Rios (eds.), Short Fatigue Cracks, ESIS 13, Mechanical Engineering Publications, London, p. 55.
Neumann, P. and Tönnessen, A. (1988) in P.O. Kettunen et al. (eds.), Proc. of 8 th Int. Conf. on the Strength of Metals and Alloys (ICSMA 8), Vol. 1, Pergamon Press, p. 743.
Lowe, T.C. and Valiev, R.Z., eds. (2000) Investigations and Applications of Severe Plastic Deformation, Kluwer Academic Publishers.
Vinogradov, A., Kaneko, Y., Kitagawa, K., Hashimoto, S. and Valiev R. (1998) Mater. Sci. Forum 269-272, 987.
Eisenmeier, G., Ottmüller, M., Höppel, H.W. and Mughrabi H. (1999) in FATIGUE’ 99: Proc. of Seventh Int. Fatigue Congress, Vol. 1, Higher Education Press, Beijing, P.R. China, EMAS Ltd., West Midlands, UK, p. 253.
Borbély, A., Mughrabi, H., Eisenmeier, G. and Höppel, H.W. (2000). Publication in preparation, to be submitted to int. J. Fracture
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2001 Springer Science+Business Media Dordrecht
About this chapter
Cite this chapter
Mughrabi, H. (2001). Cyclic Strain Localization in Fatigued Metals. In: Bouchaud, E., Jeulin, D., Prioul, C., Roux, S. (eds) Physical Aspects of Fracture. NATO Science Series, vol 32. Springer, Dordrecht. https://doi.org/10.1007/978-94-010-0656-9_20
Download citation
DOI: https://doi.org/10.1007/978-94-010-0656-9_20
Publisher Name: Springer, Dordrecht
Print ISBN: 978-0-7923-7147-2
Online ISBN: 978-94-010-0656-9
eBook Packages: Springer Book Archive