Abstract
Magnetic storage and retrieval devices include tape, flexible disk and rigid disk drives used for audio, video and data processing applications. The magnetic recording process involves relative motion between a magnetic medium (tape or disk) against a stationary or rotating read/write magnetic head. For construction and materials used in magnetic head and medium components, refer to [1] – [3]. The need for ever increasing high recording densities requires that surfaces should be as smooth as possible and flying height (physical separation or clearance between a head and a medium) be as low as possible. In modern tape and flexible and rigid disk drives, flying height ranges from about 25 nm to 50 run, and roughness of the head and medium surfaces ranges from about 1.5 to 5 nm rms. As an analogy, a magnetic head slider flying over a disk surface with a flying height of 25 nm with a relative speed of 20 m/s is equivalent to an aircraft flying at a physical spacing of 0.2 μm at 900 km/h, Fig. 1. This is what a disk drive experiences during its operation.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Bhushan, B. ( 1996), Tribology and Mechanics of Magnetic Storage Devices, second edition, Springer-Verlag, New York.
Bhushan, B. (ed.) (1999), Handbook of Micro/Nanotribology, second edition, CRC Press, Boca Raton, FL.
Bhushan, B. (2000), Mechanics and Reliability of Flexible Magnetic Media, second edition, Springer-Verlag, New York.
Bhushan, B. (1999), Principles and Applications of Tribology, Wiley, New York.
Bhushan, B. (1996), “Contact Mechanics of Rough Surfaces in Tribology: Single Asperity Contact” (invited), Appl. Mech. Rev. 49, 275–298.
Bhushan, B. (1996), “Methodology for Roughness Measurement and Contact Analysis for Optimization of Interface Roughness” (invited), IEEE Trans. Magn. 32, 1819–1825.
Bhushan, B. (1998), “Contact Mechanics of Rough Surfaces in Tribology: Multiple Asperity Contact” (invited), Tribol Lett. 4, 1–35.
Tian, X. and Bhushan, B. (1996), “A Numerical Three-Dimensional Model for the Contact of Rough Surfaces by Variational Principle”, ASME Journal of Tribology 118, 33–42.
Tian, X. and Bhushan, B. (1996), “The Micro-Meniscus Effect of a Thin Liquid Film on the Static Friction of Rough Surface Contact”, J. Phys. D: Appl. Phys. 29, 163–178.
Chilamakuri, S. K. and Bhushan, B. (1998), “Contact Analysis of Non-Gaussian Random Surfaces”, Proc.Inst. of Mech. Engrs., Part J: J. Engr. Tribol. 212, 19–32.
Poon, C. Y. and Bhushan, B. (1996), “Numerical Contact and Stiction Analyses of Gaussian Isotropie Surface for Magnetic Head Slider/Disk Contact”, Wear 202, 68–82.
Chilamakuri, S. K. and Bhushan, B. (1997), “Optimization of Asperities for Laser-Textured Magnetic Disk Surfaces”, Tribol Trans. 40, 303–311.
Chilamakuri, S. K. and Bhushan, B. (1998), “Design of Sombrero and Donut Shaped Bumps for Optimum Performance”, IEEE Trans. Magn. 34, 1798–1800.
Chilamakuri, S. K. and Bhushan, B. (1999), “Contact Analysis of Laser Textured Disks in Magnetic Head-Disk Interface”, Wear 230, 11–23.
Chilamakuri, S. K. and Bhushan, B. (1999), “Effect of Peak Radius on Design of W-type Donut Shaped Laser Textured Surfaces”, Wear 230, 118–123.
Chilamakuri, S. K., Zhao, X. and Bhushan, B. (2000), “Failure Analysis of Laser Textured Surfaces” Proc.Inst. Mech. Engrs., Part J: J. Engr. Tribol. (in press).
Bhushan, B. and Chilamakuri, S. K. (1996), “Non-Gaussian Surface Roughness Distribution of Magnetic Media for Minimum Friction/Stiction”, J. Appl. Phys. 79, 5794–5796.
Bhushan, B. (1999), “Chemical, Mechanical and Tribological Characterization of Ultra-Thin and Hard Amorphous Carbon Coatings as Thin as 3.5 nm: Recent Developments (Invited)”, Diamond and Related Materials 8, 1985–2015.
Zhao, Z. and Bhushan, B. (1996), “Effect of Bonded Lubricant Films on the Tribological Performance of Magnetic Thin-Film Rigid Disks”, Wear 202, 50–59.
Bhushan, B. and Zhao, Z. (1999), “Macroscale and Microscale Tribology Studies of Molecularly Thick Boundary Layers of Perfluoropolyether Lubricants for Magnetic Thin-Film Rigid Disks”, J. Info. Storage Proc. Syst. 1–21.
Kajdas, C. and Bhushan, B. (1999), Mechanism of Interaction and Degradation of Perfluoropolyethers with DLC Coating in Thin-Film Magnetic Rigid Disks: A Critical Review”, J. Info. Storage Proc. Syst. 1, 303–320.
Zhao, Z., Bhushan, B. and Kajdas, C. (1999), “Effect of Thermal Treatment and Sliding on Chemical Films with DLC Surfaces”, J. Info. Storage Proc. Syst. 1, 259–264.
Zhao, X., Bhushan, B. and Kajdas, C. “Lubrication Studies of Head-Disk Interfaces in a Controlled Environment-Part II: Degradation Mechanisms of PFPE Lubricants” Proc.Inst. Mech. Engrs., Part J: J. Engr. Tribol. (in press).
Bhushan, B., Israelachvili, J. N. and Landman, U. (1995), “Nanotribology: Friction, Wear and Lubrication at the Atomic Scale“, Nature 374, 607–616.
Bhushan, B., “Nanoscale Tribophysics and Tribomechanics”, Wear, Vol. 225-229, 1999, pp. 465–492.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2001 Springer Science+Business Media Dordrecht
About this chapter
Cite this chapter
Bhushan, B. (2001). Macro- and Microtribology of Magnetic Rigid Disk Drives. In: Hadjipanayis, G.C. (eds) Magnetic Storage Systems Beyond 2000. NATO Science Series, vol 41. Springer, Dordrecht. https://doi.org/10.1007/978-94-010-0624-8_44
Download citation
DOI: https://doi.org/10.1007/978-94-010-0624-8_44
Publisher Name: Springer, Dordrecht
Print ISBN: 978-1-4020-0118-5
Online ISBN: 978-94-010-0624-8
eBook Packages: Springer Book Archive