Abstract
Fracture resistance of cast ferritic steel predetermined for containers of spent nuclear fuel has been evaluated based on sets of different fracture mechanical test specimens and assessment procedures. Standard fracture toughness values were determined from IT SENB specimens and compared with data from pre-cracked CVN specimens (P-CVN). The other parameters that have been in focus of interests were: the effect of metallurgical technology (two melts followed), specimen location (midthickness vs. surface locations) in thick walled plate, the effect of loading rate (here followed on CVN and P-CVN specimens), statistical effects etc
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Cotterell, D.: The past, present, and future of fracture mechanics, Engng. Fract Mech., 69 (2002), pp. 533–553.
Guidelines for safe design of shipping packages against brittle fracture, IAEA-TECDOC-717, (1993).
Saegusa, T. et al: Application of IAEA TECDOC 717 to packagings and comparison with reactor vessels, RAMTRANS, 6 (1995), pp. 127–131.
Warnke, E.P. and Bounin, D.: Fracture mechanics considerations concerning the revised IAEA/TECDO/717 Guidelines, Trans. of the SMiRT 14, Lyon, (1997), pp. 571–578.
Bradley, W.L., McKinney, K.E. and Gerhard, P.C. Jr: Fracture toughness of ductile iron and cast steel, ASTM STP 905, J.H. Underwood et. al eds, ASTM, (1986), pp. 75–94.
Stranghöner, N. et al: Design against brittle fracture of structural steels, Nordic Steel Construction Conference, Bergen, (1998), pp. 751–762.
Moulin, D., Yuritzin, T., Sert, G.: An Overview of R&D work performed in France concerning the risk of brittle fracture of transport cask, RAMTRANS, Vol. 6, (1995), No. 2/3, pp. 145–248.
Winkler, H.P.: IAEA requirements for cask testing and short summary of developments at GNR, The Transferability of Fracture Mechanical Characteristics, Contribution in this Volume, (2002).
Brynda J., Hosnédl P., Picek M.: ŠKODA cask testing and licensing, Contribution in this Vol. (2002).
Heerens J., Zerbst U., and Schwalbe K.H.: Strategy for characterising fracture toughness in the ductile to brittle transition regime, Fatigue Fract. Engng. Mater. Struct., 16 (1993), 11, pp. 1213–1220.
Wallin K., Rintamaa, Ehrnstén U.: Transferability of fracture mechanical parameters — philosophy or physics, 26th MPA Seminar, Stuttgart, (2000), pp. 6.1-6.20.
Standard Test Method For the Determination of Reference Temperature To for Ferritic Steels in the Transition range, (1997) ASTM, E1921-97.
Beremin. F. M.: A local riterion for cleavage fracture of a nuclear pressure vessel steels, Metallurgical Transaction, Vol. 14A, (1983) pp. 2277–2287.
Kozák V. and Janik, A. The use of the local approach for the brittle fracture prediction, The Transferability of Fracture Mechanical Characteristics, Contribution in this Volume, (2002).
Anderson T.L., Dodds. R.H., Jr.: Simple constraint corrections for subsized fracture toughness specimens, ASTMSTP 1204, Small Spec. Test Techniques Applied to NRPV …,(1993), pp. 93–105.
Nevalainen M., Dodds R.H.: Numerical investigation of 3-D constraint effects on brittle fracture, SE(B) and C(T) specimens, Int. Journal of Fracture, Vol. 74, (1995), pp. 131–161.
Koppenhoefer K. C., Dodds R. H.: Loading rate effect on cleavage fracture of pre-cracked CVN specimens: 3-D studies, Engineering Fracture Mechanics, Vol. 58, (1997) pp. 249–270
Minami F., Brückner-Foit A., Münz D., Trolldenier B.: Estimation procedure for the Weibull parameters used in the local approach, Int. Journal of Fracture, Vol. 54, (1992), pp. 197–210.
Ruggieri C., Dodds R. D.: A transferability model for brittle fracture including constraint and ductile tearing effects: a probabilistic approach, International Journal of Fracture, Vol. 79, (1996), pp. 309–340.
Wiesner, C.S., Andrews, R.M., A review of Micromechanical failure models for cleavage and ductile fracture, TWI, (1997), rpt. 592/1997.
Pluvinage G., Dlouhy I., Lenkey G.: Fracture resistance of steels for containers of spent nuclear fuel, The project plan NATO SfP 972655, (1998).
Kraus L., Němeček, S., and Kasl J.: (2002) Mechanical properties after intercritical heat treatment and microalloying, The Transferability of Fracture Mechanical Characteristics, Contribution in this Volume
Chlup Z (2002).: Micromechanical aspects of brittle fracture initiation, PhD thesis, Brno University of Technology, Institute of Physics of Materials, Brno
EN ISO 14556: 1999 Steel — Charpy V notch pendulum impact test Instrumented test method, (1999).
ISO/DSI12135 Unified method of test for the determination of quasistatic fracture toughness, (1998).
Chlup Z, DlouhĂ˝ I. (2002). Micromechanical aspects of constraint effect at brittle fracture initiation, The Transferability of Fracture Mechanical Characteristics, Contribution in this Volume
Rosinski S.T., Corwin W.R. ASTM cross-comparison exercise on determination of material properties through miniature sample testing, Small Specimen Test Techniques, ASTMSTP 1329, W.R. Corvin et al Eds, (1998), pp. 3–14
Lenkey G.: Dynamic fracture toughness determination of large SENB specimens, The Transferability of Fracture Mechanical Characteristics. Contribution in this Volume, (2002).
Vtček L., Chlup Z., Kozák V.: Problems of Q-parameter calculations, Contribution in this Volume, (2002).
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2002 Springer Science+Business Media Dordrecht
About this chapter
Cite this chapter
DlouhĂ˝, I., Holzmann, M., Chlup, Z. (2002). Fracture Resistance of Cast Ferritic C-MN Steel for Container of Spent Nuclear Fuel. In: DlouhĂ˝, I. (eds) Transferability of Fracture Mechanical Characteristics. NATO Science Series, vol 78. Springer, Dordrecht. https://doi.org/10.1007/978-94-010-0608-8_4
Download citation
DOI: https://doi.org/10.1007/978-94-010-0608-8_4
Publisher Name: Springer, Dordrecht
Print ISBN: 978-1-4020-0795-8
Online ISBN: 978-94-010-0608-8
eBook Packages: Springer Book Archive