Advertisement

Microprocessor Algorithm for the Control of SCR Motor Systems

  • J. B. Plant
Chapter
Part of the International Series on Microprocessor-Based Systems Engineering book series (ISCA, volume 1)

Abstract

This chapter1contains a new algorithm for the microprocessor control of three phase SCR controlled DC machines. Two look up tables provide the open loop nominal steady state SCR firing angle and steady state current as a function of the demanded speed. A feedback correction is made to the nominal SCR firing angle according to a linear combination of the sampled deviations of the current, the speed and the sum of the speed deviations from their expected steady state values. Nonuniform sampling is used and sampling occurs at the instant of firing each SCR. The nonlinear discrete-time equations are linearized for the sake of stability analysis in the event of small speed and current deviations. The linearization analysis and digital computer simulations of a three horsepower motor indicate that control can be achieved and constant disturbance torque inputs rejected using only two sets of feedback gains; one set each for the continuous and discontinuous conduction modes of motor operation. The compute delay phenomenon is included in both the analysis and the simulations.

Keywords

Feedback Gain Conduction Mode Control Interval Disturbance Torque Microprocessor Control 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. [1]
    James A. Cadzou and Hinrich R. Martens, “Discrete-Time and Computer Control Systems,” Prentice-Hall Electrical Engineering Series, 1970, Prentice-Hall Inc., Englewood Cliffs, New Jersey.Google Scholar
  2. [2]
    Paul Katz, “Digital Control Using Microprocessor,” Prentice-Hall International Inc., 1981.Google Scholar
  3. [3]
    J.B. Plant, S.J. Jorna and Y.T. Chan, “Microprocessor Control of Position or Speed of an SCR-DC Motor Drive,” IEEE Trans. Indust. Electron. Contr. Instrum, pp. 228–234 Vol. IECI-27, No 3, August 1980.CrossRefGoogle Scholar
  4. [4]
    Y.T. Chan, A.J. Chmiel, J.B. Plant, “A Microprocessor-Based Current Controller for SCR-DC Motor Drives,” IEEE Trans. Indust. Electron. Contr. Instrum pp. 169–176, Vol. IECI-27, No 3, August 1980.CrossRefGoogle Scholar

Copyright information

© D. Reidel Publishing Company 1983

Authors and Affiliations

  • J. B. Plant
    • 1
  1. 1.Royal Military College of CanadaKingstonCanada

Personalised recommendations