Abstract
It is common practice to correct the measurements taken from a process so that random or gross errors can be accounted for and reduced. Data reliability is crucial for classical operations such as regulation, control, optimization, identification, and can be secured through a balance equilibration algorithm. Historically, balance computation proved important in determining yield accounting, in allocating costs and in recording information upon which future action can be based. From the planning point of view, balance determination is important in process design, sensors location production planning.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
J.C. Agarwal, I. Klumpar, F.D. Zybert, Simple Material Balance Model, Chem., Eng. Prog., vol. 74, June 1978, n° 6, pp. 68–71.
F. Albarede, A. Provost, Petrological and Geochemical Mass-Balance Equations: An Algorithm for Least Square Fitting and General Error Analysis, Comput. and Geosciences, vol. 3, 1977, pp. 309–326.
G.M. Anosova, S.E. Aronina, I. Ya. Shtral, Algorithmes de Correction des Debits dans les Equations de Bilan-Matiere, Khim. Prom-St., Aviom. Khim. Proizvod, 1980, n° 1, pp. 22–26.
L. Badea, I. Belcea, Optimazarea Multicriteriala A Bilanturilor De Mareriale Ale Sistemelor Complexe, Rev. Chim. (Bucarest), vol. 31, 1980, n° 2, pp. 173–175.
R.F. Baldus, L.L. Edwards, Mass and Energy Balances for Complete Kraft Mills, A.I.ChE, Se. (USA), vol. 75, 1979, n° 184, pp. 56–61
I. Bjerle, J.C. Berggren, H. Karlson, Chemical Process Engineering, Part 1: Material Balances, Kern. Tidskr, vol. 92, 1980, n° 5, pp. 24–28.
R. Bloise, C. Reinhart, J. Batina, Etablissement de Bilans Matiéres Statistiquement Cohérents sur des Unites Complexes, Revue de l’ndustrie Minérale, Mars 1981, pp. 257–263.
J.C. Brepson, Validation de Donnees et Identification de Systemes Dynamiques, Thèse de 3érne Cycle, Nancy, Juin 1984.
J.L. Chandon, P. Pinson, Analyse typologique, Masson Ed., 1981.
G.W. Cutting, Material Balances in Metallurgical Studies: Current Use at Warren Spring Laboratory, Paper 79-3, AIME Annual Meeting, New Orleans, 1979.
M. 1979Darouach, Aide au Diagnostic de l’Etat des Systemes. Validation de Mesures par Equilibrage de Bilan-Matiere, These de Docteur-Ingenieur, Nancy, 1983.
M. Darouach, J. Ragot, J.C. Brepson, Validation de Donnees en presence de Mesures manquantes, I.A.S.T.E.D., Lille (France), 15–17 Mars 1983.
M. Darouach, J. Ragot, J. Merckle, Validation hierarchisee de Mesures pour des Systemes de Grande Dimension, 4th I.A.S.T.E.D. International Symposium and Course, Lugano, 21–24 Mai 1983.
A.D. Gordon, On the Assessment and Comparison of Classifications, Analyse de Donnees et Informatique, INRIA Ed., 1979.
D. Gun, Material Balance: Its Applications and Misapplications in Underground Coal Gasification, Report 1979, Lect. C/RI-79/05, 37 pages, Energy Res. Abstr., vol. 4, 1979, n° 22, Abstr. n.52457.
J. Heemskerk, Ajustement des Bilans par la Methode des Moindres Carres, Ind. Min., Tech., 1980, n° 2, pp. 116–118.
D. Hodouin, M. Everell, A hierarchical Procedure for Adjustment and Material Balancing of Mineral Process Data, Research Report 79–14, August 1979, 44 pages.
W. Kauschus, Compensation of Material Balances with Inaccurate Measured Values, Einsatz Vorbereitung Prozesstech., 1979, pp. 201–222.
R.G. Kheile, Solution of Material Balance Problems for Process Design, PH. D. Thesis, Purdue University, W. Lafayette, Inf., 1975.
D. Laguiton, Material Balance of Mineral Processing Flowsheets. Canmet. Sciences Laboratories, Division Report MRP/MSL 80–33, 1980.
F. Madron, Statistical Treatment of Material Balance of Separation Operations, Collec. Czech. Chem. Commun., vol. 45, 1980, N° 1, pp. 32–40, 7 ref.
D. Maquin, J. Ragot, J. Mercklé, Application de l’Analyse Typologique a la Decomposition des Systemes Complexes, Journees de l’Optimisation, Montreal, Mai 1984.
G. Marro, R. Rossi, A. Tonieli, Appling a Two-Level Optimization Technique in Material Balance Problems, pp. 543–550.
J. Merckle, J. Ragot, M. Darouach, Diagnostic assiste par Ordinateur de l’Etat dfun Reseau de Transport de Matiere, 21st ISMM Intern. Symposium and Course, Lugano, 21–24 Juin.
A.L. Mular, R.G. Bradburn, B.B. Flintoff, C.R. Larsen, Mass Balance of a Grinding Circuit, University of British Columbia, Vancouver, B.C., Canada, CIM Bull., vol. 6, December 1976, pp. 124–129.
J. Ragot, Contribution a l’Extension de la Methode des Moindres Carres, Application a 11Equilibrage de Bilans Industriels, These d’Etat, Nancy (France), Mai 1980, 308 pages.
J. Ragot, M. Aubrun, A. Lynch, A Useful Technique for Metallurgical Mass Balances. Applications in Flotation, 3rd Symposium IFAC on Automation in Mining, Mineral and Metal Processing, Montreal, 1980.
J. Ragot, J.C. Brepson, D. Sauter, Methodologie dfEtude des Bilans-Matiere. Revue de l1Industrie Minerale, 1983.
J. Ragot, M. Darouach, J.L. Cardini, C. Scheidt, Mise en Oeuvre d’un Programme d’Aide au Diagnostic de la Coherence des Mesures sur des Pilotes Industriels, Intern. 83 A.M.S.E. Summer Conf., vol. 1, Nice, Septembre 1983, pp. 3–20.
J. Ragot, M. Aubrun, M. Darouach, Validation de Donnees et Equilibrage de Bilan-Matiere: A Propos de Quatre Methodes, Congres de l’IASTED, Davos, 2–5 Mars 1982, Publie dans IASTED Journal of Control and Computers, vol. 11, n° 2.
M. Roesch, J. Ragot, Equilibrage de Bilan-Matiere et Validation de donnees par Fonetion Spline, Congres IASTED Measurement and Control, Tunis, 1-3 Septembre 1982.
J. Romagnoli, G. Stephanopoulos, On the Rectification of Measurements Errors for Complex Chemical Plants, Steady State Analysis, Chem. Eng. Sci., vol. 35, 1980, n° 5, pp. 1067–1081, 18 references.
Sbornik, Smoothing of Measured Values at Multicomponent Material Balance Calculations by the Least Square Method after Linearisation of Constraints, Sc. Papers of the Prague Institute of Chemical Technology, K 11, 1976, pp. 29–37.
H.W. Smith, N. Ichiyen, Computer Adjustment of Metallurgical Balances, Can. Min. and Metall., 1973, pp. 97–100.
M.K. Sood, G.V. Reklaitis, J.M. Woods, Solution of Material Balances for Flowsheets Modeled with Elementary Modules, The Unconstrained Case, AICHE J. (USA), vol. 25, 1979, n° 2, pp. 209–219.
R. Tipman, T.C. Burnett, C.T. Edwards, Mass Balances in Mill Metallurgical Operation, 10th Annual Meeting of the Canadian Mineral Processors Canmet., Ottawa, 1978.
R.B. Tippin, The Application of a Computer Calculation Material Balance in Process Evaluation of a Potash Compaction, Paper 79–80, AIME Annual Meeting, New Orleans, 1979.
J.W. White, R.L. Winslow, Flowsheet Analysis for Mass Balance Calculation in Overdefined Metallurgical System with Recycle, Paper 79–80, AIME Annual Meeting, New Orleans, 1979, 11 pages.
R.L. Wiegel, Improving the Plant Metallurgical Balance, Paper 78-B-322, AIME Fall Meeting, Lake Buena Vista, Florida, September 1978, 7 pages.
V. Vaclavek, J. Vosolsobe, Smoothing of Measured Values at Multicomponent Material Balance Calculations by the Least Square Method after Linearization of Constraints, SB. Vys.SK,, Chem., Technol. Praze, Chem. Inz., 1976, K 11, pp. 29–37.
I.D. Zaitsev, A. Zdzulya, V.I. Shats, Principles of the Development of a Universal Algorithm for Calculation of Material and Thermal Balances of Complex Chemico-Technological Systems, Tr. N. I.I. Proekt., in-T, Asnovn. Khimii, vol. 39, 1975.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1987 Martinus Nijhoff Publishers, Dordrecht
About this chapter
Cite this chapter
Ragot, J., Darouach, M., Maquin, D. (1987). Mass Balance Equilibration. In: Yarar, B., Dogan, Z.M. (eds) Mineral Processing Design. NATO ASI Series, vol 122. Springer, Dordrecht. https://doi.org/10.1007/978-94-009-3549-5_9
Download citation
DOI: https://doi.org/10.1007/978-94-009-3549-5_9
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-010-8087-3
Online ISBN: 978-94-009-3549-5
eBook Packages: Springer Book Archive