Summary
The vast majority of metallographic studies of fatigue have been concerned with room-temperature cycling and, generally, with elementary materials such as pure metals and simple alloys. In this chapter, using ambient temperature fatigue as a baseline, recent developments in the observation and understanding of high temperature fatigue are explored, up to and including crack initiation. Both the effects of microstructure on cyclic response and the influence of cyclic strain on microstructure are examined, to highlight the requirements for improved fatigue resistance. Emphasis has been placed on realistic, but complex, cycles where interactions between fatigue and creep are possible, and also on commercial alloys, in particular those based on aluminium and titanium. Data in these areas are limited, and it is concluded that Metallography has yet to reach its full potential in assisting life prediction of components and structures in service.
This chapter was written whilst the author was Reader in Metallurgy in the Department of Mechanical Engineering, University of Bristol, UK.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Forsyth, P. J. E., 1962, A two-stage process of fatigue crack growth, Proc. Crack Propagation Symp., 1961, Cranfield, pp. 76–94.
Miller, K. J., 1984, Initiation and growth rates of short fatigue cracks, Eshelby Memorial Conf., Sheffield, ( IUTAM ), pp. 477–500.
Mughrabi, H., 1985, Dislocations in fatigue, Dislocations and properties of real materials, London, The Institute of Metals, pp. 244–62.
Mughrabi, H., 1985, Cyclic deformation and fatigue—some current problems, ICSMA 7, Montreal, pp. 1–26.
Bressers, J., 1985, Fatigue and microstructure, Proc. Int. Conf. on High Temperature Alloys—Their Exploitable Potential, Petten, pp. 1–26.
Plumbridge, W. J. and Ryder, D. A., 1969, Metallography of fatigue, Metall. Reviews No. 136, Metals and Materials, pp. 119—42.
Mughrabi, H., 1980, Microscopic mechanisms of metal fatigue, Proc. Int. Conf. on Strength of Metals and Alloys, Vol. 3, eds P. Haasen, V. Gerold and G. Kostorz, Pergamon Press, pp. 1615–38.
Mughrabi, H. and Wang, R., 1980, Cyclic strain localisation and fatigue crack initiation slip bands in face centred cubic metals and single phase alloys, Int. Symp., Defects and Fracture, Tuczno, Poland, eds G. C. Sih and H. Zorski, The Hague, M. Nijhoff, pp. 15–28.
Pohl, K., Mayr, P. and Macherauch, E., 1980, Persistent slip bands in the interior of a fatigued low carbon steel, Scripta Metall., 14, 1167–9.
Winter, A. T., Pederson, O. B. and Rasmussen, K. V., 1981, Dislocation microstructures in fatigued copper polycrystals, Acta Metall., 20, 738–48.
Boulanger, L., Bission, A. and Tavassoli, A. N., 1985, Labyrinth structures and persistent slip bands in fatigued 316 stainless steel, Phil. Mag. A, 51, L5 - L11.
Shirai, H. and Weertman, J. R., 1983, Fatigue dislocation structures at elevated temperatures, Scripta Metall., 17, 1253–8.
Mughrabi, H., 1979, Discussion at Conf. on Fatigue Mechanisms, Kansas City, STP 675, Philadelphia, ASTM, pp. 126–7.
Lisiecki, L. L. and Weertman, J. R., 1986, Orientation effects in copper single crystals fatigued at elevated temperatures, Scripta Metall., 20, 249–52.
Mughrabi, H., Ackermann, F. and Herz, K., 1979, Persistent slip bands in fatigued face centred and body central cubic metals, Fatigue mechanisms, ed. J. T. Fong, Philadelphia, ASTM 675, pp. 69–97.
Ackermann, F., 1981, Doctorate Thesis, Univ. Stuttgart.
Pohl, K., Mayr, P. and Macherauch, E., 1981, Cyclic deformation behaviour of a low carbon steel in the temperature range between room temperature and 850 K, Int. J. Fracture, 17, 221–33.
Pohl, K., Mayr, P. and Macherauch, E., 1983, Shape and structure of persistent slip bands in iron carbon alloys, Defects, fracture and fatigue, eds G. C. Sih and J. W. Provan, The Hague, M. Nijhoff, pp. 147–59.
Kanazawa, K., Yamaguchi, K. and Nishijima, S., 1985, Mapping of low cycle fatigue mechanisms at elevated temperatures for an austentic stainless steel, Low Cycle Fatigue: Future Directions, Lake George, ASTM, Philadelphia, STP 942, ed. H. Solomon (to be published).
Nilsson, J. O., 1984, Influence of nitrogen on the high temperature low cycle fatigue behaviour of austenitic stainless steels, Fatigue Engng Mat. Struc., 7, 55–64.
Mughrabi, H., 1983, Cyclic deformation and fatigue of multiphase materials, Deformation of multiphase and particle containing materials, eds J. S. Bilde- Sorenson et al., Riso National Laboratory, Roskilde, Denmark, pp. 65–82.
Laird, C., 1975, Cyclic deformation of metals and alloys, Treatise on materials science and technology, Vol. 6, Plastic deformation of materials, ed. R. J. Arsenault, San Francisco, Academic Press, pp. 101–62.
Stolz, R. E. and Pineau, A. G., 1978, Dislocation-precipitate interaction and cyclic stress-strain behaviour of a/strengthened superalloy, Mat. Sci. Engng, 34, 275–84.
Gerold, V., Lerch, B. A. and Steiner, D., 1984, Fatigue behaviour of age hardened alloy single crystals, Z. metall., 75, 546–53.
Wilhelm, M., 1981, The cyclic stress-strain behaviour of age hardened Cu-Co and Al-Zn-Mg alloy single crystals, Mat. Sci. Engng, 48, 91–106.
Plumbridge, W. J. and Bartlett, R. A., 1982, Cyclic response of a lCr-Mo-V low alloy steel, Int. J. Fatigue, 4, 209–16.
Challenger, K. D. and Vining, P. G., 1983, Substructure and back stress changes resulting from the cyclic loading of 2Cr-lMo steel at 755 K, Mat. Sci. Engng, 58, 257–67.
Calderon, H. A., Weertman, J. R. and Fine, M. E., 1984, Effect of cyclic plastic deformation on elevated temperature Ostwald Ripening of an alloy with coherent precipitates, Scripta Metall., 18, 587–92.
Antolovich, S. D., Liu, S. and Baur, R., 1981, Low cycle fatigue behaviour of René 80 at elevated temperature, Metall. Trans., 12A, 473–81.
Nahm, A. and Moteff, J., 1981, Characterisation of fatigue substructure in Incoloy Alloy 800 at elevated temperature, Metall. Trans., 12A, 1011–25.
Ermi, A. M. and Moteff, J., 1982, Correlation of substructure with time dependent fatigue properties of AISI 304 stainless steel, Metall. Trans., 13A, 1577–88.
Ermi, A. M. and Moteff, J., 1983, Microstructural development and cracking behaviour of AISI 304 stainless steel tested in time dependent fatigue modes, J. Engng Mat. Technol., 105, 21–30.
Horton, C. A. P., Lai, J. K. L. and Skelton, R. P., 1983, The relationship between microstructure, fatigue and creep behaviour in a type 316 stainless steel, Mechanical properties of structural materials including environmental effects, IAEA Report IWGFR-49, Vol. 1, pp. 411–33.
Sanders, T. H., Frishmuth, R. E. and Embley, G. T., 1981, Temperature dependent deformation mechanisms of Alloy 718 in low cycle fatigue, Metall. Trans., 12A, 1003–10.
Nilsson, J. O., 1984, Influence of dislocation-precipitate reaction on low cycle fatigue resistance of Alloy 800 at 600°C, Metal Sci., 18, 351–5.
Dean, M. S. and Plumbridge, W. J., 1982, Ageing of Type 316 stainless steel and its effect on creep and fatigue behaviour, Conf. on Mechanical Behaviour and Nuclear Applications of Stainless Steel at Elevated Temperatures, Varese, Book No. 280. Institute of Metals, pp. 73–80.
Nilsson, J. O. and Thorvaldsson, T., 1985, Low cycle fatigue behaviour of alloy 800 H at 600°C—effect of grain size and y’ precipitate dispersion, Fatigue Fract. Engng Mat. Struct., 8, 373–84.
Lutjering, G., Daker, H. and Munz, D., 1973, Microstructure and fatigue behaviour of aluminium alloys, Proc. Third Int. Conf on 4The Strength of Metals and Alloys’, Cambridge, Vol. 1, pp. 427–31.
Edwards, L. and Martin, J. W., 1982, The influence of dispersoids on the low cycle fatigue properties of Al-Mg-Si alloys, Proc Sixth Int. Conf. on ‘The Strength of Metals and Alloys’, pp. 873–8.
Morris, W. L., Buck, O. and Marcus, H. L., 1976, Fatigue crack initiation and early propagation in A1 2219-T851, Metall. Trans., 7, 1161–5.
Kung, C. Y. and Fine, M. E., 1979, Fatigue crack initiation and microcrack growth in 2024-T4 and 2124-T4 aluminium alloys, Metall. Trans., 10, 603–10.
Plumbridge, W. J. and Dalski, M. E., 1977, Unpubl. M.Sc. thesis, University of Bristol.
Matsuoka, S., Kim, S. and Weertman, J. R., 1983, Mechanical and microstructural behaviour of a ferritic stainless steel under high temperature cycling, Topical Conf on Ferritic Alloys for Use in Nuclear Energy Technologies (Utah), pp. 507–16.
Rezgui, B., 1979, Interaction fatigue-fluage, effect d’un temps de mainten sur la resistance a la fatigue d’un acier (type 316) a 600°C, Rapport CEM-R-4982.
Laird, C. and Duquette, D. J., 1972, Fatigue crack initiation, Corrosion fatigue—chemistry, mechanics and microstructure, ed. O. J. Devereux, A. J. McEvily and R. W. Staehle, Nat. Assoc. Corrosion Engrs—2, Houston, pp. 88–117.
Essmann, U., Gaesele, U. and Mughrabi, H., 1981, A model of extrusions and intrusions in fatigued metals, Part 1, Phil. Mag., 44, 405–26.
Mughrabi, H., Wang, R., Diffort, K. and Essmann, U., 1983, Fatigue crack initiation by cyclic slip irreversibilities in high cycle fatigue, Fatigue mechanisms—advances in quantitative measurement of physical damage, eds J. Lankford et al., STP 811, Philadelphia, ASTM, pp. 5–43.
Brown, L. M., 1981, Dislocations and the fatigue strength of metals, Dislocation modelling in physical systems, eds M. F. Ashby et al., Pergamon Press, pp. 51–68.
Brown, L. M. and Ogin, S. L., 1985, Role of internal stresses in the nucleation of fatigue cracks, Eshelby Memorial Lecture (Sheffield), Cambridge University Press, pp. 501–28.
Neumann, P., 1983, Fatigue, Physical metallurgy eds R. W. Cahn and P. Raason, Amsterdam, Elsevier, pp. 1553–94.
Hunsche, A., 1982, Doctorate thesis, Rheinisch-Westfälisch Technische Hochschule, Aachen.
Graf, M. and Hornbogen, E., 1978, The effect of inhomogeneity of cyclic strain on initiation of cracks, Scripta Metall., 12, 147–50.
Pelloux, R. M. N. and Stoltz, R. E., 1976, Optimisation of microstructures for fatigue resistant engineering alloys, Proc. ICS MA 4, Nancy, pp. 1023–36.
Kim, Y. M. and Merrick, H. F., 1980, Fatigue properties of MA-6000E, a γ’ strengthened ODS alloy, Superalloys 1980, Metals Park, Ohio, ASM, pp. 551–61.
Bressers, J., Schusser, U., Fenske, E. and De Cat, R., 1986, Time dependent processes in the low cycle fatigue of nickel base superalloys, COST 501, to be published.
Fine, M. E., 1980, Fatigue resistance of metals, Metall. Trans., IIA, 365–79.
James, M. R. and Morris, W. C., 1982, The fracture of constituent particles during fatigue, Mat. Sci. Engng, 56, 63–71.
Lankford, J., 1977, Effect of oxide inclusions on fatigue failure, Int. Metall. Rev., 11, 221–8.
Tanaka, K. and Mura, T., 1982, A theory of crack initiation at inclusions, Metall. Trans., 13A, 117–23.
McMahon, C. J. and Coffin, L. F., 1970, Mechanisms of damage and fracture in high temperature, low cycle fatigue of a cast nickel based superalloy, Metall. Trans., 1, 3443–50.
Antolovich, S. D., Bornas, P. and Strudel, J. L., 1979, Low cycle fatigue of René 80 as affected by prior exposure, Metall. Trans., 10A, 1859–68.
Taplin, D. M. P., Tang, N. Y. and Leipholz, H. H. E., 1984, On fatigue- creep-environment interaction and feasibility of fatigue maps, Sixth Int. Conf. on Fracture, New Delhi, pp. 127–42.
Argon, A. S., 1982, Mechanisms and mechanics of fracture in creep alloys, Recent advances in creep and fracture of engineering materials and structures, eds B. Wilshire and D. R. J. Owen, Swansea, Pineridge Press, pp. 1–52.
Wells, C. H. and Sullivan, C. P., 1969, Interactions between creep and low cycle fatigue in Udimet 700 at 1400°F, Fatigue at high temperature, STP 459, Philadelphia, ASTM, pp. 59–74.
May, M. J. and Honeycombe, R. W. K., 1963/4, The effect of temperature on the fatigue behaviour of Mg and some Mg alloys, J. Inst. Metals, 92, 41–9.
Saegusa, T. and Weertman, J. R., 1978, Influence of grain boundary morphology on void formation, Scripta Metall., 12, 187–91.
Snowden, K. U., 1966, Fatigue crack formation in bicrystals of lead, Phil. Mag., 14, 1019–29.
Lim, L. C. and Raj, R., 1984, On slip induced intergranular cavitation durin low cycle fatigue of nickel at intermediate temperature, Acta Metall., 32, 727–33.
Lim, L. C. and Raj, R., 1984, Effect of boundary structure on slip induced cavitation in polycrystalline nickel, Acta Metall., 32, 1183–90.
Scaife, E. C. and James, P. L., 1968, Effect of environment on intergranular cavitation, Metal Sci., 2, 217–20.
Bricknall, R. H. and Woodford, D. A., 1981, Cavitation in nickel during oxidation and creep, Creep and fracture of engineering materials and structures, eds B. Wilshire and D. R. J. Owen, Swansea, Pineridge Press, pp. 249–62.
Gittins, A., 1968, The stability of igrain boundary cavities in copper, Acta Metall., 16, 517–22.
Tang, N. Y., Taplin, D. M. R. and Plumtree, A., 1985, Schema for depicting cavity nucleation during high temperature fatigue, Mat. Sci. Technol., 1, 145–51.
Beere, W., 1981, Theoretical treatment of cavity growth and nucleation, Cavities and cracks in creep and fatigue, ed. J. Gittus, London, Elsevier Applied Science, pp. 1–27.
Skelton, R. P., 1966, The growth of grain boundary cavities during high temperature fatigue, Phil. Mag., 14, 563–72.
Page, R., Weertman, J. R. and Roth, M., 1980, Investigation of fatigue-induced grain boundary cavitation by small angle neutron scattering, Scripta Metall., 14, 773–7.
Yoo, M. H., Ogle, J. C., Borie, B. S., Lee, E. H. and Hendricks, R. W., 1982, Small angle neutron scattering study of fatigue induced cavities in nickel, Acta Metall., 30, 1733–42.
Smith, E. and Barnby, T. J., 1967, Crack nucleation in crystalline solids, Metal Sci., 1, 56–64.
Driver, J. H., 1971, The effect of grain boundary precipitates on the high temperature fatigue strength of austenitic stainless steels, Metal Sci., 5, 47–50.
Tang, N. Y., Plumtree, A. and Taplin, D. M. R., 1984, A model for predicting intergranular propagation of fatigue cracks at elevated temperatures, Second Irish Durability and Fracture Conference, Dublin, pp. 1–13.
Tang, N. Y. and Plumtree, A., 1985, A note on grain boundary diffusion controlled cavity growth during elevated temperature fatigue, Metall. Trans., 16A, 300–2.
Fleck, R. G., Taplin, D. M. R. and Beevers, C. J., 1975, An investigation of the nucleation of creep cavities by lMv electron microscopy, Acta Metall., 23, 415–34.
Thorpe, T. W. and Smith, G. C., 1981, Elevated temperature low cycle fatigue of AISI 316 stainless steel, Proc. Fifth Conf. on Fracture, Cannes, Advances in fracture research, ed. D. François, pp. 2413–22.
Plumbridge, W. J., Priest, R. H. and Ellison, E. G., 1979, Damage formation during fatigue-creep interactions, Third Int. Conf. on Mechanical Behaviour of Materials, Cambridge, pp. 129–39.
Plumbridge, W. J. and Miller, K. J., 1972, The effect of prior fatigue deformation on creep, Int. Conf. on Creep Strength in Steel and High Temperature Alloys, Sheffield, pp. 50–3.
Ellison, E. G. and Paterson, A. J. F., 1976, Creep fatigue interactions in lCr-Mo-V steel, Proc. Inst. Mech. Engrs, 190, 321–50.
Plumbridge, W. J., Bartlett, R. A., Chung, T. E. and Ellison, E. G., 1977, Mechanism of fatigue-creep interaction in a low alloy steel, Fourth Int. Conf. on Fracture, Waterloo, pp. 831–7.
Nazmy, M. Y., 1982, Sequential effect of creep and fatigue in a cast Ni-base alloy, Scripta Metall, 16, 823–6.
Wei, K. and Dyson, B. F., 1982, Creep-fatigue interactions in 316 stainless steel under torsional loading, Conf. on Mechanical Behaviour and Nuclear Applications of Stainless Steel at Elevated Temperatures, Varese, Institute of Metals, Book No. 280, pp. 136–44.
Neailey, K. and Plumbridge, W. J., unpubl. work.
Wareing, J., 1977, Creep-fatigue interaction in austenitic stainless steels, Metall. Trans., 8A, 711–21.
Gladwin, D. and Miller, D. A., 1982, The effect of cycle waveshape on the low cycle fatigue behaviour of 20%Cr-25%Ni-Nb stainless steel at 650°C, Fatigue Engng Mat. Struct., 5, 275 - 86.
Miller, D. A., 1983, Fatigue-creep mechanisms maps for 20%Cr 25%Ni/Nb stainless steel at 593°C and 650°C, Int. Conf. on Advances in Life Prediction Methods, New York, ASME.
Plumbridge, W. J., Dean, M. S. and Miller, D. A., 1982, The importance of failure mode in fatigue-creep interactions, Fatigue Engng Mat. Struct., 5, 101–14.
Plumbridge, W. J. and Ellison, E. G., 1986, Low cycle fatigue behaviour of superalloy blade materials at elevated temperature, Int. Conf. on Mechanical Behaviour of Superalloys, London, Institute of Metals.
Plumbridge, W. J. and Stanley, M., 1986, The effects of dwell periods on the high temperature fatigue behaviour of Titanium (829) alloy, Int. Conf. on Fatigue of Engng Mat. and Structures, Sheffield, pp. 377–86.
Nazmy, M. Y., 1983, High temperature low cycle fatigue of IN 738 and application of strain range partitioning, Metall. Trans, 14, 449–61.
Nazmy, M. Y., 1983, Effect of multiple crack propagation on the high temperature low cycle fatigue of a cast nickel-base alloy, Scripta Metall., 17, 491–4.
Neailey, K. and Plumbridge, W. J., 1986, Application of the friction stress approach to creep in Type 316 stainless steel, Conf. on Designing with High Temperature Materials, York, Institute of Metals.
Neailey, K. and Plumbridge, W. J., 1987, High temperature mechanical properties of two batches on Type 316 stainless steel, Paper submitted to Conf. on Stainless Steels, 1987, The Institute of Metals.
Laird, C., 1977, The general cyclic stress-strain response of aluminium alloys, Philadelphia, ASTM, STP 637, pp. 3–35.
Bhat, S. P. and Laird, C., 1979, High temperature cyclic deformation of precipitation hardened alloy—II. Fully coherent precipitates, Acta Metall., 27, 1873–83.
Horibe, A., Lee, J. K. and Laird, A., 1984, Cyclic deformation of Al-4%Cu polycrystals containing 0 precipitate, Fatigue Engng Mat. Struct., 7, 145–54.
Mabuchi, H. and Nakayamo, Y., 1986, Microstructure and fracture of fatigued polycrystalline Al-Mg alloys at elevated temperature, Scripta Metall., 20, 717–21.
Bhat, S. P. and Laird, C., 1979, High temperature cyclic deformation of precipitation hardened alloy—I. Partially coherent precipitates, Acta Metall., 27, 1861–71.
Polmear, I. J., 1981, Light alloys—metallurgy of the light metals, London, Edward Arnold, pp. 37–42.
Boyapati, K. and Polmear, I. J., 1979, Fatigue-microstructure variations in some aged aluminium alloys, Fatigue Engng Mat. Struct., 2, 23–33.
Culver, L. E., Balthazar, J. C. and Radon, J. C., 1983, Temperature effects on the fatigue behaviour of an aluminium-silicon alloy, Trans. Can. Soc. Mech. Engrs, 8, 150–6.
Saleh, Y. and Margolin, H., 1980, Low cycle fatigue behaviour of Ti-Mn alloys: cyclic stress-strain response, Metall. Trans., 11A, 1295–302.
Suhua, A., Zhongguang, W. and Yuebo, X., 1985, The fatigue deformation and fracture characteristics of coarse grained polycrystalline titanium, Scripta Metall., 19, 1089–93.
Plumbridge, W. J. and Stanley, M., 1986, Low cycle fatigue of a titanium 829 alloy, Int. J. Fatigue, 8, 209–16.
Mahajan, Y. and Margolin, H., 1982, Low cycle fatigue behaviour of Ti-6Al-2Sn-4Zr-6Mo: Part II. Cyclic deformation behaviour and low cycle fatigue, Metall. Trans., 13A, 269–74.
Koss, D. A. and Wojcik, C. C., 1976, Flow stress asymmetry and cyclic stress strain response in a BCC Ti-V alloy, Metall. Trans., 7A, 1243–4.
Saleh, Y. and Margolin, H., 1982, Low cycle fatigue of Ti-Mn alloys: fatigue life, Metall. Trans., 13A, 1275–81.
Wells, C. H. and Sullivan, C. P., 1969, Low cycle fatigue crack initiation in TÍ-6AMV, Trans. Am. Soc. Metals., 62, 263–70.
Steele, R. K. and McEvily, A. J., 1976, High cycle fatigue behaviour of TÍ-4A1-4V alloy, Engng Fracture Mech., 8, 31–7.
Mahajan, Y. and Margolin, H., 1982, Low cycle fatigue behaviour of Ti-6Al-2Sn-4Zr06Mo: Part 1. The role of microstructure in low cycle crack nucleation and early crack growth. Metall. Trans., 13A, 257–68.
Eylon, D. and Hall, J. A., 1977, Fatigue behaviour of beta processed titanium alloy IMI 685, Metall. Trans., 8A, 981–90.
Shih, D. S., Lin, F. S. and Starke, E. A. Jr, 1985, The effect of microstructure and texture on the low cycle fatigue properties of Ti-6Al-2Nb-lTa-0-8Mo, Titanium science and technology, eds G. Lutjering, U. Zwicker and W. Bunk, Deutsche Gesellschaft für Metallkunde, pp. 2099–106.
Eylon, D., Bartel, T. L. and Rosenblum, M. E., 1980, High temperature low cycle fatigue in beta processed Ti-5Al-5Sn-2Zr-2Mo-025Si, Metall. Trans., 11A, 1361–7.
Hoffman, C., Eylon, D. and McEvily, A. J., 1982, Influence of microstructure on the elevated temperature fatigue resistance of a titanium alloy, Low cycle fatigue and life prediction, eds C. Amzallag, B. N. Leis and P. Rabbe, STP 770, Philadelphia, ASTM, pp. 5–22.
Evans, W. J. and Gostelow, C. R., 1979, The effect of hold time on the fatigue properties of a processed titanium alloy, Metall. Trans., 10A, 1837–46.
White, J., Loretto, M. H. and Smallman, R. E., 1984, The effect of dwells on low cycle fatigue on IMI 829, Fifth Conf. on Titanium, Munich, pp. 2297–304.
Davidson, D. L. and Eylon, D., 1980, Titanium alloy fatigue fracture facet investigation by selected area electron channeling, Metall. Trans., 11A, 837 — 43.
Eylon, D. and Rosenblum, M. E., 1982, Effects of dwell on high temperature low cycle fatigue of a titanium alloy, Metall. Trans., 13A, 322–4.
Fong, J. T., ed., 1979, Fatigue mechanisms, STP 675, Philadelphia, ASTM.
Lankford, J., Davidson, D., Morris, W. L. and Wei, R. P., eds, 1983, Fatigue mechanisms: advance in quantitative measurement of physical damage, STP 811, Philadelphia, ASTM.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1987 Elsevier Applied Science Publishers Ltd
About this chapter
Cite this chapter
Plumbridge, W.J. (1987). Metallography of High Temperature Fatigue. In: Skelton, R.P. (eds) High Temperature Fatigue. Springer, Dordrecht. https://doi.org/10.1007/978-94-009-3453-5_4
Download citation
DOI: https://doi.org/10.1007/978-94-009-3453-5_4
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-010-8046-0
Online ISBN: 978-94-009-3453-5
eBook Packages: Springer Book Archive