Skip to main content
SpringerLink
Log in

Design of Compact and Enhanced Heat Exchangers for Liquid-Vapor Phase-Change Applications

  • Chapter
Two-Phase Flow Heat Exchangers

Part of the book series: NATO ASI Series ((NSSE,volume 143))

Abstract

Very high heat transfer coefficients can be obtained with boiling and condensation in compact and enhanced heat exchangers. Starting with the two-phase flow behavior in compact and enhanced surfaces, a state-of-the-art review is made of and correlations are presented for flow boiling and condensation in compact and enhanced channel geometries. This includes offset strip fin and perforated fin plate-fin geometries, cross-ribbed channel geometries, tubes with ribbed or grooved walls, and tubes with twisted-tape inserts. Next, design correlations are presented for predicting two-phase pressure loss in these surfaces. Finally, a methodology for the design of evaporators and condensers is presented briefly that includes the fin efficiency evaluation.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Log in via an institution
Chapter
USD 29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
USD 429.00
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
Softcover Book
USD 549.99
Price excludes VAT (USA)
  • Compact, lightweight edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info
Hardcover Book
USD 549.99
Price excludes VAT (USA)
  • Durable hardcover edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. Kays, W.M. and London, A.L., Compact Heat Exchangers, Second Edition, McGraw-Hill Book Company, New York, NY (1985).

    Google Scholar 

  2. Shah, R.K., “Compact Heat Exchanger Surface Selection Methods,” Heat Transfer 1978, Vol. 4, pp. 193–199, Hemisphere Publishing Company, New York, NY (1978).

    Google Scholar 

  3. Collier, J.G., Convective Boiling and Condensation, Second Edition, McGraw Hill, New York, NY (1981).

    Google Scholar 

  4. Hoopes, J.W. Jr., “Flow of Steam-Water Mixtures in a Heated Annulus and Through Orifices,” AIChE Journal, Vol. 3, pp. 268–275 (1957).

    Article  Google Scholar 

  5. Davis, E.J. and David, M.M., “Heat Transfer to High-Quality Steam-Water Mixtures Flowing in a Horizontal Rectangular Duct,” the Can. J. Chem. Eng., Vol. 39, pp. 99–105, (1961).

    Article  Google Scholar 

  6. Hosler, E.R., “Flow Patterns in High Pressure Two-Phase (Steam-Water) Flow with Heat Addition,” Chem. Eng. Prog. Symp. Series, Vol. 64, No. 82, pp. 54–66 (1968).

    Google Scholar 

  7. Quandt, E.R., “Measurement of Some Basic Parameters in Two-Phase Annular Flow,” AIChE Journal, Vol. 11, pp. 31–318 (1965).

    Article  Google Scholar 

  8. Carey, V.P. and Mandrusiak, G.D., “Annular Film-Flow Boiling of Liquids in a Partially Heated Vertical Channel with Offset Strip Fins,” Int. J. Heat Mass Transfer, Vol. 29, pp. 927–939 (1986).

    Article  Google Scholar 

  9. Mandrusiak, G.D., Carey, V.P. and Xu, X., “An Experimental Study of Convective Boiling in a Partially Heated Horizontal Channel with Offset Strip Fins,” in Advances in Heat Exchanger Design, edited by R.K. Shah and J.T. Pearson, HTD-Vol. 66, pp. 55–63, ASME, New York, NY (1986).

    Google Scholar 

  10. Xu, X. and Carey, V.P., “Heat Transfer and Two-Phase Flow During Convective Boiling in a Partially-Heated Cross-Ribbed Channel,” Int. J. Heat and Mass Transfer (to appear).

    Google Scholar 

  11. Xu, X. and Carey, V.P., “An Experimental Study of the Effects of Channel Orientation on Convective Boiling in a Partially Heated Cross-Ribbed Channel,” Proceedings of the 2nd ASME-JSME Thermal Engineering Joint Conference, Honolulu, Hawaii, Vol. 3, pp. 141–146 (1987).

    Google Scholar 

  12. Hewitt, G.F. and Roberts, D.N., “Studies of Two-Phase Flow Patterns by Simultaneous X-ray and Flash Photography,” AERE Report AERE-M 2159, HMSO (1969).

    Google Scholar 

  13. Taitel, Y. and Dukler, A.E., “A Model for Predicting Flow Regime Transitions in Horizontal and Near Horizontal Gas-Liquid Flow,” AIChE Journal, Vol. 22, pp. 47–55 (1976).

    Article  Google Scholar 

  14. Mandrusiak, G.D. and Carey, V.P., “Convective Boiling in Vertical Channels with Different Offset Strip Fin Geometries: Part I — Data for Annular Film-Flow Roiling,” submitted for publication in the ASME J. Heat Transfer.

    Google Scholar 

  15. Panitsidis, H., Gresham, R.D. and Westwater, J.W., “Boiling of Liquids in a Compact Plate-Fin Heat Exchanger,” Int. J. Heat and Mass Transfer, Vol. 18, pp. 37–42 (1975).

    Article  Google Scholar 

  16. Chen, C.C., Loh, J.V. and Westwater, J.W., “Prediction of Boiling Heat Transfer Duty in a Compact Plate-Fin Heat Exchanger Using the Improved Local Assumption,” Int. J. Heat and Mass Transfer, Vol. 24, pp. 1907–1912 (1981).

    Article  Google Scholar 

  17. Chen, C.C. and Westwater, J.W., “Application of the Local Assumption for the Design of Compact Heat Exchangers for Boiling Heat Transfer,” ASME J. Heat Transfer, Vol. 106, pp. 204–209 (1984).

    Article  Google Scholar 

  18. Galezha, V.B., Usyukin, I.P. and Kan, K.D., “Boiling Heat Transfer with Freons in Finned-Plate Heat Exchangers,” Heat Transfer-Sov. Res., Vol. 8, No. 3, pp. 103–110 (1976).

    Google Scholar 

  19. Robertson, J.M., “Boiling Heat Transfer with Liquid Nitrogen in Brazed-Aluminum Plate-Fin Heat Exchangers,” AIChE Symp. Series, No. 189, Vol. 75, pp. 151–154 (1979).

    Google Scholar 

  20. Robertson, J.M. and Lovegrove, P.C., “Boiling Heat Transfer with Freon 11 (Rll) in Brazed Aluminum Plate-Fin Heat Exchangers,” ASME J. Heat Transfer, Vol. 105, pp. 605–610 (1983).

    Article  Google Scholar 

  21. Robertson, J.M., “The Correlation of Boiling Coefficients in Plate-Fin Heat Exchanger Passages with a Film-Flow Model,” Heat Transfer 1982, Munich, Vol. 6, pp. 341–345 (1982).

    Google Scholar 

  22. Robertson, J.M., “The Prediction of Convective Boiling Coefficients in Serrated Plate-Fin Passages Using an Interrupted Liquid-Film Flow Model,” in Basic Aspects of Two-Phase Flow and Heat Transfer, HTD-Vol. 34, pp. 163–171, ASME, New York (1984).

    Google Scholar 

  23. Robertson, J.M. and Clarke, R.H., “The General Prediction of Convective Boiling Coefficients in Plate-Fin Heat Exchanger Passages,” AIChE Symp. Series, No. 245, Vol. 81, pp. 129–134 (1985).

    Google Scholar 

  24. Robertson, J.M. and Clarke, R.H., “The Onset of Boiling of Liquid Nitrogen in Plate-Fin Heat Exchangers,” AIChE Symp. Series, No. 208, Vol. 77, pp. 86–95 (1981).

    Google Scholar 

  25. Robertson, J.M. and Clarke, R.H., “Investigations into the Onset of Convective Boiling with Liquid Nitrogen in Plate-Fin Heat Exchanger Passages under Constant Wall Temperature Boundary Conditions,” AIChE Symp. Series, No. 236, Vol. 80, pp. 98–103 (1984).

    Google Scholar 

  26. Yung, D., Lorenz, J.J. and Panchal, C., “Convective Vaporization and Condensation in Serrated-Fin Channels,” in Heat Transfer in Ocean Thermal Energy Conversion Systems, W.L. Owen, editor, HTD-Vol. 23, pp. 29–37, ASME, New York (1980).

    Google Scholar 

  27. Carey, V.P., “Surface Tension Effects on Convective Boiling Heat Transfer in Compact Heat Exchangers with Offset Strip Fins,” ASME J. Heat Transfer, Vol. 107, pp. 970–974 (1985).

    Article  Google Scholar 

  28. Mandrusiak, G.D. and Carey, V.P., “Convective Boiling in Vertical Channels with Different Offset Strip Fin Geometries: Part II — Heat Transfer with Forced Convective and Nucleate Boiling Effects,” subªmitted for publication in the ASME J. Heat Transfer.

    Google Scholar 

  29. Robertson, J.M., “The Boiling Characteristics of Perforated Plate-Fin Channels with Liquid Nitrogen in Upflow,” in Heat Exchangers for Two-Phase Flow Applications, ASME HTD-Vol. 27, pp. 35–40, ASME, New York (1983).

    Google Scholar 

  30. Panchal, C.B., Hillis, D.L. and Thomas, A., “Convective Boiling of Ammonia and Freon 22 in Plate Heat Exchangers,” Proceedings of the ASME/JSME Thermal Engineering Joint Conference, Vol. 2, pp. 261–268, ASME, New York (1983).

    Google Scholar 

  31. Lavin, J.G. and Young, E.H., “Heat Transfer to Evaporating Refrigerants in Two-Phase Flow,” AIChE Journal, Vol. 11, pp. 1124–1132 (1965).

    Article  Google Scholar 

  32. Thomas, D.G. and Young, G., “Thin-Film Evaporation Enhancement by Finned Surfaces,” Ind. Eng. Chem. Process Design Development, Vol. 9, pp. 318–323 (1970).

    Google Scholar 

  33. Withers, J.G. and Habdas, E.P., “Heat Transfer Characteristics of Helical-Corrugated Tubes for In Tube Roiling of Refrigerant R-12,” AIChE Symp. Series, Vol. 70, No. 138, pp. 98–106 (1974).

    Google Scholar 

  34. D’yachkov, F.N., “Investigation of Heat Transfer and Hydraulics for Boiling of Freon-22 in Internally-Finned Tubes,” Heat Transfer — Sov. Res., Vol. 10, No. 2, pp. 10–19 (1978).

    Google Scholar 

  35. Ito, M. and Kimura, H., “Boiling Heat Transfer and Pressure Drop in Internal Spiral-Grooved Tubes,” Bulletin of the JSME, Vol. 221, pp. 1251–1257 (1979).

    Article  Google Scholar 

  36. Kubanek, G.R. and Miletti, D.L., “Evaporative Heat Transfer and Pressure Drop Performance of Internally-Finned Tubes with Refrigerant 22,” ASME J. Heat Transfer, Vol. 101, pp. 447–452 (1979).

    Article  Google Scholar 

  37. Akhanda, M.A.R. and James, D.D., “An Experimental Study of the Relative Effects of Transverse and Longitudinal Ribbing of the Heat Transfer Surface in Forced Convective Boiling,” in Two-Phase Heat Exchanger Symposium, HTD-Vol. 44, pp. 83–90, ASME, New York (1985).

    Google Scholar 

  38. Gambill, W.R., Bundy, R.D. and Wansbrough, R.W., “Heat Transfer, Burnout, and Pressure Drop for Water in Swirl Flow Through Tubes with Internal Twisted Tapes,” Chem. Eng. Prog. Symp. Series, Vol. 57, No. 32, pp. 127–137 (1961)

    Google Scholar 

  39. Feinstein, L. and Lundberg, R.E., “Fluid Friction and Boiling Heat Transfer with Water in Vortex Flow in Tubes Containing an Internal Twisted Tape,” Report RADC-TRR-63–451, AD430889 (1963).

    Google Scholar 

  40. Lopina, R.F. and Bergles, A.E., “Subcooled Boiling of Water in Tape-Generated Swirl Flow,” ASME J. Heat Transfer, Vol. 95, pp. 281–283 (1973).

    Article  Google Scholar 

  41. Blatt, T.A. and Adt, R.R., Jr., “The Effects of Twisted Tape Swirl Generation on the Heat Transfer Rate and Pressure Drop of Boiling Freon 11 and Water,” ASME Paper No. 63-WA-42 (1963).

    Google Scholar 

  42. Viskanta, R., “Critical Heat Flux for Water in Swirling Flow,” Nucl. Sci, and Eng., Vol. 10, pp. 202–203 (1961).

    Google Scholar 

  43. Bergles, A.E., Fuller, W.D. and Hynek, S.J., “Dispersed Flow Film Boiling of Nitrogen with Swirl Flow,” Int. J. Heat and Mass Transfer, Vol. 14, pp. 1343–1354 (1971).

    Article  Google Scholar 

  44. Cumo, M., Farello, G.E., Ferrari, G. and Palazzi, G., “The Influence of Twisted Tapes in Subcritical, Once-Through Vapor Generators in Counterflow,” ASME J. Heat Transfer, Vol. 96, pp. 365–370 (1974).

    Article  Google Scholar 

  45. Pai, R.H. and Pasint, D., “Research at Foster Wheeler: Advanced Once-Through Boiler Design,” Electric Light and Power, pp. 66–70 (January 1965).

    Google Scholar 

  46. Jensen, M.K. and Bensler, H.P., “Saturated Forced-Convective Boiling Heat Transfer with Twisted-Tape Inserts,” ASME J. Heat Transfer, Vol. 108, pp. 93–99 (1986).

    Article  Google Scholar 

  47. Carey, V.P., Mandrusiak, G.D. and Roddy, T., “Analysis of the Heat Transfer Performance of Offset Strip Fin Geometries in a Cold Plate Operating as Part of a Two-Phase Thermosyphon,” Proceedings of the 1987 International Symposium on Cooling Technology for Electronic Equipment, Honolulu, Hawaii (to appear).

    Google Scholar 

  48. Bennett, D.L. and Chen, J.C., “Forced Convective Boiling in Vertical Tubes for Saturated Pure Components and Binary Mixtures,” AIChE Journal, Vol. 26, pp. 454–461 (1980).

    Article  Google Scholar 

  49. Chen, J.C., “Correlations for Boiling Heat Transfer to Saturated Fluids in Convective Flow,” Ind. & Eng. Chem. Design and Dev., Vol. 5, pp. 322–329 (1966).

    Article  Google Scholar 

  50. Forster, H.K. and Zuber, N., “Dynamics of Vapor Bubbles and Boiling Heat Transfer,” AIChE Journal, Vol. 1, pp. 531–535 (1955).

    Article  Google Scholar 

  51. Bergles, A.E, Collier, J.G., Delhaye, J.M., Hewitt, G.F. and Mayinger, F., Two-Phase Flow and Heat Transfer in the Power and Process Industries, Hemisphere Publishing Corporation, New York, NY (1981).

    Google Scholar 

  52. Edelstein, S., Perez, A.J. and Chen, J.C., “Analytic Representation of Convective Boiling Functions,” AIChE Journal, Vol. 30, pp. 840–841 (1984).

    Article  Google Scholar 

  53. Bennett, D.L., Davis, M.W., and Herteler, B.L., “The Suppression of Saturated Nucleate Boiling by Forced Convective Flow,” AIChE Symp. Series, Vol. 76, No. 199, pp. 91–103 (1980).

    Google Scholar 

  54. Gopin, S.R., Usyukin, I.P. and Aver’yanov, I.G., “Heat Transfer in Condensation of Freons on Finned Surfaces,” Heat Transfer — Sov. Res., Vol. 8, No. 6, pp. 114–119 (1976).

    Google Scholar 

  55. Panchal, C.B., “Heat Transfer with Phase Change in Plate-Fin Heat Exchangers,” AIChE Symposium Series, Vol. 80, No. 236, pp. 90–97 (1984).

    Google Scholar 

  56. Haseler, L.E., “Condensation of Nitrogen in Brazed Aluminum Plate-Fin Heat Exchangers,” ASME Paper No. 80-HT-57 (1980).

    Google Scholar 

  57. Robertson, J.M., N. Blundell and R.H. Clarke, “The Condensing Characteristics of Nitrogen in Plain Brazed Aluminum, Plate-Fin Heat-Exchanger Passages,” Heat Transfer 1986, Vol. 3, pp. 1719–1724, Hemisphere Publishing Company, New York (1986).

    Google Scholar 

  58. Cooper, A., “Condensation of Steam in Plate Heat Exchangers,” AIChE Symp. Series, Vol. 70, No. 138, p. 172 (1974).

    Google Scholar 

  59. Tovazhnyanskiy, L.L. and Kapustenko, P.A., “Intensification of Heat and Mass Transfer in Channels of Plate Heat Exchangers,” submitted for publication in Chemical Engineering Communications.

    Google Scholar 

  60. Tovazhnyanskiy, L.L. and Kapustenko, P.A., “Heat Transfer from Steam Condensing in an Extended-Surface Slot Channel,” Heat Transfer — Sov. Res., Vol. 12, No. 4, pp. 34–36 (1980).

    Google Scholar 

  61. Panchal, C.B., “Condensation Heat Transfer in Plate Heat Exchangers,” in Two-Phase Heat Exchanger Symposium, J.T. Pearson and J.B. Kitto, editors, HTD-Vol. 24, pp. 45–52, ASME, New York (1985).

    Google Scholar 

  62. Prince, W.J., “Enhanced Tubes for Horizontal Evaporator Desalination Process,” M.S. Thesis in Engineering, Univ. of California at Los Angeles (1971).

    Google Scholar 

  63. Reisbig, R.L., “Condensation Heat Transfer Augmentation Inside Splined Tubes,” Paper 74-HT-7, ASME (1974).

    Google Scholar 

  64. Azer, N.Z., Fan, L.T. and Lin, S.T., “Augmentation of Condensation Heat Transfer with In-Line Static Mixers,” Proceedings of the 1976 Heat Transfer and Fluid Mech. Inst., pp. 512–520 (1976).

    Google Scholar 

  65. Milton, R.M. and Gottzmann, C.F., “Liquified Natural Gas: High Efficiency Reboilers and Condensers,” Chem. Eng. Progress, Vol. 68, pp. 56–69 (1972).

    Google Scholar 

  66. Gottzmann, C.F., O’Neill, P.S. and Milton, P.E., “High Efficiency Heat Exchangers,” Chem. Eng. Progress, Vol. 69, pp. 69–75 (1973).

    Google Scholar 

  67. Vrable, D.L., Yang, W.J. and Clark, J.A., “Condensation of Refrigerant-12 Inside Horizontal Tubes with Internal Axial Fins,” Heat Transfer 1974, Vol. 3, pp. 250–254 (1974).

    Google Scholar 

  68. Royal, J.H. and Bergles, A.E., “Augmentation of Horizontal In-Tube Condensation by Means of Twisted-Tape Inserts and Internally Finned Tubes,” ASME J. Heat Transfer, Vol. 100, pp. 17–24 (1978).

    Article  Google Scholar 

  69. Luu, M. and Bergles, A.E., “Experimental Study of Augmentation of In-Tube Condensation of R-113,” ASHRAE Trans., Vol. 85, Part II, pp. 132–145, (1979).

    Google Scholar 

  70. Luu, M. and Bergles, A.E., “Enhancement of Horizontal In-Tube Condensation of Refrigerant-113,” ASHRAE Trans., Vol. 86, Part I, pp. 293–312 (1980).

    Google Scholar 

  71. Said, S.A. and Azer, N.Z., “Heat Transfer and Pressure Drop during Condensation Inside Horizontal Tubes with Twisted-Tape Inserts,” ASHRAE Trans., Vol. 89, Part I, pp. 96–113 (1983).

    Google Scholar 

  72. Said, S.A. and Azer, N.Z., “Heat Transfer and Pressure Drop during Condensation Inside Horizontally Finned Tubes,” ASHRAE Trans., Vol. 89, Part I, pp. 114–134 (1983).

    Google Scholar 

  73. Venkatesh, S.K. and Azer, N.Z., “Enhancement of Condensation Heat Transfer of R-ll by Internally Finned Tubes,” ASHRAE Trans., Vol. 91, Part II (1985).

    Google Scholar 

  74. Zivi, S.M., “Estimation of Steady-State Steam Void Fraction by Means of Minimum Entropy Generation,” ASME J. Heat Transfer, Vol. 86, pp. 247–252 (1964).

    Google Scholar 

  75. Boyko, L.D. and Kruzhilin, G.N., “Heat Transfer and Hydraulic Resistance During Condensation of Steam in a Horizontal Tube and in a Bundle of Tubes,” Int. J. Heat and Mass Transfer, Vol. 10, pp. 361–373 (1967).

    Article  Google Scholar 

  76. Cavallini, A. and Zecchin, R., “High Velocity Condensation of Organic Refrigerants Inside Tubes,” reprinted from the Proceedings of the XHIth International Congress of Refrigeration, Washington, DC, International Institute of Refrigeration (1971).

    Google Scholar 

  77. Shah, M.M., “A General Correlation for Heat Transfer During Film Condensation Inside Pipes,” Int. J. Heat and Mass Transfer, Vol. 22, pp. 547–556 (1976).

    Article  Google Scholar 

  78. Traviss, D.P., Rohsenow, W.M. and Baron, A.B., “Forced Convection Condensation in Tubes: A Heat Transfer Correlation for Condenser Design,” ASHRAE Trans., Vol. 79, Part I, pp. 157–165 (1972).

    Google Scholar 

  79. Akers, W.W., Deans, H.A. and Crosser, O.K., “Condensing Heat Transfer within Horizontal Tubes,” Chem. Eng. Prog. Symp. Series, Vol. 55, No. 29, pp. 171–176 (1959).

    Google Scholar 

  80. Mandrusiak, G.D. and Carey, V.P., “Pressure Drop Characteristics of Two-Phase Flow in a Vertical Channel with Offset Strip Fins,” Experimental Thermal and Fluid Science, Vol. 1, No. 1 (1988).

    Google Scholar 

  81. Wallis, G.B., One-Dimensional Two-Phase Flow, McGraw Hill, New York, NY (1981).

    Google Scholar 

  82. Lockhart, R.W. and Martinelli, R.C., “Proposed Correlation of Data for Isothermal Two-Phase Two-Component Flow in Pipes,” Chem. Eng. Progress, Vol. 45, p. 39 (1949).

    Google Scholar 

  83. Pierre, B., “Flow Resistance with Boiling Refrigerants,” ASHRAE Journal, Vol. 6, pp. 58–65 (Sept. 1964) and Vol. 6, pp. 73–77 (Oct. 1964).

    Google Scholar 

  84. Solimn, M., Schuster, J.R. and Berenson, P.J., “A General Heat Transfer Correlation for Annular Flow Condensation,” ASME J. Heat Transfer, Vol. 90, pp. 267–276 (1968).

    Google Scholar 

  85. Royal, J.M. and Bergles, A.E., “Pressure Drop Performance Evaluation of Augmented In-Tube Condensation,” Heat Transfer 1978, Vol. 3, pp. 459–464 (1978).

    Google Scholar 

  86. Dukler, A.E., Wicks, M., III and Cleveland, R.G., “Frictional Pressure Drop in Two-Phase Flow: An Approach Through Similarity Analysis,” AIChE Journal, Vol. 10, pp. 434–51 (1964).

    Article  Google Scholar 

  87. Silver, R.S. and Wallis, G.B., “A Simple Theory for Longitudinal Pressure Drop in the Presence of Lateral Condensation,” Proceedings of the Institute of Mechanical Engineers, Vol. 180, pp. 36–42 (1965–66).

    Article  Google Scholar 

  88. Jensen, M.K., Pourdashti, M. and Bensler, H.P., “Two-Phase Pressure Drop with Twisted-Tape Swirl Generators,” Int. J. Multiphase Flow, Vol. 11, pp. 201–211 (1985).

    Article  Google Scholar 

  89. Jensen, M.K., Personal Communication, 1987.

    Google Scholar 

  90. Reddy, D.G., Fighetti, C.F. and Merilo, M., “Evaluation of Two-Phase Pressure Drop Correlations for High-Pressure Steam Water Systems,” Proceedings of the ASME-JSME Thermal Engineering Joint Conference, pp. 251–259 (1983).

    Google Scholar 

  91. Staub, F.W., “Two-Phase Fluid Modeling — The Critical Heat Flux,” Nucl. Sci. Eng., Vol. 35, pp. 190–199 (1969).

    Google Scholar 

  92. Moeck, E.O., Wikhammer, G.A., MacDonald, I.P.L. and Collier, J.G., “Two Methods of Improving the Dryout Heat Flux for High Pressure Steam/Water Flow,” Atomic Energy of Canada, Ltd., Report No. AECL-2109 1964).

    Google Scholar 

  93. Matzner, R., Moeck, E.O., Casterline, J.E. and Wikhammer, G.A., “Critical Heat Flux in Long Tubes at 1000 psi with and without Swirl Promotors,” ASME Paper No. 65-WA/HT-30 (1965).

    Google Scholar 

  94. Rosuel, A. and Sourioux, G., “Influence de Tourbillons Induits Dans L’eau Bouillaute a la Pression Atmospherique sur les Flux de Calefraction,” Rapport EURATOM NO. 5, S.N.E.C.M.A., Division Atomique (1961).

    Google Scholar 

  95. Hughmark, G.A., “Holdup in Gas-Liquid Flow,” Chem. Eng. Progress, Vol. 58, pp. 62–65 (1962).

    Google Scholar 

  96. Turner, J.M. and Wallis, G.B., “The Separate-Cylinders Model of Two-Phase Flow,” Thayer’s School of Engineering Report No. NY-3114–6, Dartmouth College (1965).

    Google Scholar 

  97. Shah, R.K., “Compact Heat Exchangers,” in Handbook of Heat Transfer Applications, Second Edition, Chapter 4, Part 3, pp. 4–174 to 4–312, McGraw-Hill Book Co., New York (1985).

    Google Scholar 

  98. Burmeister, L.C., “Vertical Fin Efficiency with Film Condensation,” ASME J. Heat Transfer, Vol. 104, pp. 391–393 (1982).

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Department of Mechanical Engineering, University of California, Berkeley, CA, 94720, USA

    V. P. Carey

  2. Harrison Radiator Division, General Motors Corporation, Lockport, NY, 14094, USA

    R. K. Shah

Authors
  1. V. P. Carey
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. R. K. Shah
    View author publications

    You can also search for this author in PubMed Google Scholar

Editor information

Editors and Affiliations

  1. Department of Mechanical Engineering, University of Miami, Coral Gables, Florida, USA

    Sadik Kakaç

  2. Department of Mechanical Engineering, Rensselaer Polytechnic Institute, Troy, New York, USA

    Arthur E. Bergles

  3. Department of Mechanical Engineering, University of Porto, Porto Codex, Portugal

    E. Oliveira Fernandes

Rights and permissions

Reprints and permissions

Copyright information

© 1988 Kluwer Academic Publishers

About this chapter

Cite this chapter

Carey, V.P., Shah, R.K. (1988). Design of Compact and Enhanced Heat Exchangers for Liquid-Vapor Phase-Change Applications. In: Kakaç, S., Bergles, A.E., Fernandes, E.O. (eds) Two-Phase Flow Heat Exchangers. NATO ASI Series, vol 143. Springer, Dordrecht. https://doi.org/10.1007/978-94-009-2790-2_30

Download citation

  • DOI: https://doi.org/10.1007/978-94-009-2790-2_30

  • Publisher Name: Springer, Dordrecht

  • Print ISBN: 978-94-010-7755-2

  • Online ISBN: 978-94-009-2790-2

  • eBook Packages: Springer Book Archive

Publish with us

Policies and ethics

Search

Navigation