Skip to main content
SpringerLink
Log in

Boiling on the Shellside of Horizontal Tube Bundles

  • Chapter
Two-Phase Flow Heat Exchangers

Part of the book series: NATO ASI Series ((NSSE,volume 143))

Abstract

Boiling on the shellside of horizontal tube bundles is widely used in industry. However, the open literature concerning detailed knowledge about local heat transfer and two-phase flow in such tube bundles is sparse. The following review summarizes what the state of knowledge is on prediction of heat transfer coefficients, the critical heat flux condition, and pressure drop in multitube bundles, the use of enhanced heat transfer surfaces in kettle reboilers and modelling of the thermal hydraulics in kettle reboilers. Recommendations are made for some predictive methods and correlations for use in horizontal tube bundles but the lack of research prevents strong recommendations for any predictive method for any of the heat transfer or two-phase flow processes.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Log in via an institution
Chapter
USD 29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
USD 429.00
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
Softcover Book
USD 549.99
Price excludes VAT (USA)
  • Compact, lightweight edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info
Hardcover Book
USD 549.99
Price excludes VAT (USA)
  • Durable hardcover edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. Bergles, A. E., Collier, J. G., Delhaye, J. M., Hewitt, G. F., and Mayinger, F., Two-Phase Flow and Heat Transfer in the Power and Process Industries, Hemisphere Publishing Corporation, Washington, D.C., p. 511, 1981.

    Google Scholar 

  2. Palen, J. W. and Taborek, J. J., Refinery Kettle Reboilers-Proposed Method for Design and Optimization, Chem. Engng. Prog., Vol. 58, No. 7, pp. 37–46, 1962.

    Google Scholar 

  3. Palen, J. W. and Small, W. M., New Way to Design Kettle and Internal Reboilers, Hydrocarbon Processing, Vol. 43, No. 11, pp. 199–208, 1963.

    Google Scholar 

  4. Palen, J. W., Yarden, A. and Taborek, J., Characteristics of Boiling Outside Large-Scale Horizontal Multitube Bundles, AIChE Symp. Ser. No. 118, Vol. 68, pp. 50–61, 1972.

    Google Scholar 

  5. Leong, L. S. and Cornwell, K., Heat Transfer Coefficients in a Reboiler Tube Bundle, The Chemical Engineer, No. 343, pp. 219–221, 1979.

    Google Scholar 

  6. Cornwell, K., Duffin, N. W., Schuller, R. B., An Experimental Study of the Effects of Fluid Flow on Boiling Within a Kettle Re-boiler Tube Bundle, ASME Paper No. 80-HT-45, 1980.

    Google Scholar 

  7. Cornwell, K. and Schuller, R. B., A Study of Boiling Outside a Tube Bundle Using High Speed Photography, Int. J. Heat Mass Trans., Vol. 25, pp. 683–690, 1982.

    Article  Google Scholar 

  8. Diehl, J. E., Calculate Condenser Pressure Drop, Hydrocarbon Processing, Vol. 36, No. 10, pp. 147–153, 1957.

    Google Scholar 

  9. Diehl, J. E. and Unruh, C. H., Two-Phase Pressure Drop in Horizontal Crossflow through Tube Banks, ASME Paper No. 58-HT-20, 1958.

    Google Scholar 

  10. Nakajima, K.-I., Boiling Heat Transfer Outside Horizontal Multi-tube Bundles, Heat Trans.-Jap. Res., Vol. 7, No. 2, pp. 1–24, 1978.

    Google Scholar 

  11. Grant, I. D. R. and Murray, I., Pressure Drop on the Shell-Side of a Segmentally Baffled Shell-and-Tube Heat Exchanger with Vertical Two-Phase Flow, NEL Report No. 500, 1972.

    Google Scholar 

  12. Grant, I. D. R., Two-Phase Flow and Pressure Drop on the Shell-Side of Shell-and-Tube Heat Exchangers, Heat and Fluid Flow in Steam and Gas Turbine Plants. Conf., Pub· No· 3, Inst· Mech. Engr., London, pp. 244–251, 1973.

    Google Scholar 

  13. Grant, I. D. R. and Murray, I., Pressure Drop on the Shell-Side of a Segmentally Baffled Shell-and-Tube Heat Exchanger with Horizontal Two-Phase Flow, NEL Report No. 560, 1974.

    Google Scholar 

  14. Grant, I. D. R. and Chisholm, D., Two-Phase Flow on the Shell-Side of a Segmentally Baffled Shell-and-Tube Heat Exchanger, J. Heat Trans., Vol. 101, pp. 38–42, 1979.

    Article  Google Scholar 

  15. Kondo, M. and Nakajima, K.-I., Experimental Investigation of Air-Water Two-Phase Upflow Across Horizontal Tube Bundles (Part I Flow Pattern and Void Fraction), Bulletin of the JSME. Vol. 23, No. 177, pp. 385–393, 1980.

    Article  Google Scholar 

  16. Chisholm, D., Two-Phase Flow in Heat Exchangers and Pipelines, Heat Trans. Engng., Vol. 6, pp. 48–57, 1985.

    Article  Google Scholar 

  17. Grant, I. D. R. and Chisholm, D., Horizontal Two-Phase Flow Across Tube Banks, Int. J. Heat Fluid Flow. Vol. 2, No. 2, pp. 97–100, 1980.

    Article  Google Scholar 

  18. Griffith, P. Multiphase Flow in Pipes, J. Petroleum Technology. Vol. 36, pp. 361–367, 1984.

    Google Scholar 

  19. Hewitt, G. F., Gas-Liquid Systems, in Handbook of Multiphase Systems, Ed. G. Hetsroni, pp. 2–1–2–136, Hemisphere Publishing Corporation, Washington, D.C., 1982.

    Google Scholar 

  20. Bell, K. J., Taborek, J. and Fenoglio, F., Interpretation of Horizontal Intube Condensation Heat Transfer Correlations with a Two-Phase Flow Regime Map, Chem. Engng. Prog. Symp. Ser. No. 102. Vol. 66, pp. 150–165, 1970.

    Google Scholar 

  21. Schrage, D. S., Hsu, J.-T., and Jensen, M. K., Void Fraction and Two-Phase Pressure Drop in Crossflow in a Horizontal Tube Bundle, 24th ASME-AIChE National Heat Transfer Conference, Pittsburg, 1987.

    Google Scholar 

  22. Fair, J. R. and Klip, A., Thermal Design of Horizontal Seboilers, Chem. Engng. Prog., Vol. 79, No. 8, pp. 86–96, 1983.

    Google Scholar 

  23. Payvar, P., Analysis of Performance of Full Bundle Submerged Boilers Two-Phase Heat Exchanger Symposium. HTD-Vol. 44, ASME, New York, pp. 11–18, 1983.

    Google Scholar 

  24. Palen, J. W. and Yang, C. C., Circulation Boiling Model for Analysis of Kettle and Internal Reboiler Performance, Heat Exchangers for Two-Phase Applications. HTD-Vol. 27, ASME, New York, pp. 55–61, 1983.

    Google Scholar 

  25. Polley, G. T., Ralston, T. and Grant, I. D. R., Forced Crossflow Boiling in an Ideal In-Line Tube Bundle, ASME Paper No. 80-ΗΓ-46, 1980.

    Google Scholar 

  26. Armand, A. A., The Resistance During the Movement of Two-Phase Systems in Horizontal Pipes, (AERE Trans. 828, Harwell), IZU. VSES. Tepl. Inst., Vol. 1, pp. 16–23, 1946.

    Google Scholar 

  27. Whalley, P. B. and Butterworth, D., A Simple Method for Calculating the Recirculation Flow in Vertical Thermosyphon and Kettle Reboilers, Heat Exchanger for Two-Phase Applications. ASME, New York, HTD-Vol. 27, pp. 47–53, 1983.

    Google Scholar 

  28. Chisholm, D., Two-Phase Flow in Pipelines and Heat Exchangers. George Godwin, London, 1983.

    Google Scholar 

  29. Grant, I. D. R., Finlay, I. C. and Harris, D., Flow and Pressure Drop During Vertically Upward TWo-Phase Flow Past a Tube Bundle With and Without Bypass Leakage, I. Chem. E./I. Mech. E·, Joint Symp. on Multiphase Flow Systems, University of Strathclyde, Glasgow, 2–4 April 1974, 2, paper 17, London: The Institution of Chemical Engineers, 1974.

    Google Scholar 

  30. Jensen, M. K. and Hsu, J.-T., A Parametric Study of Boiling Heat Transfer in a Tube Bundle, 2nd ASME-JSME Thermal Engineering Joint Conference, Hawaii, March, 1987.

    Google Scholar 

  31. Ishihara, K., Palen, J. W., and Taborek, J., Critical Review of Correlations for Predicting Two-Phase Pressure Drop Across Tube Banks, Heat Transfer Engng., Vol. 1, No, 3, pp. 1–8, 1979.

    Google Scholar 

  32. Baroczy, C. J., A Systematic Correlation for Two-Phase Pressure Drop, Chem. Engng. Prog. Symp. Ser. No. 44, Vol, 62, pp. 232–249, 1965.

    Google Scholar 

  33. Wallis, G. B., One-Dimensional Two-Phase Flow, McGraw-Hill, New York, 1972.

    Google Scholar 

  34. Mednikova, N. M., Concerning the Boiling of Freon-22 and 502 on a Tube Bundle at Low Temperatures, Heat Trans.—Sov. Res., Vol. 6, No. 2, pp. 30–37, 1973.

    Google Scholar 

  35. Robinson, D. B. and Katz, D. L., Effect of Vapor Agitation on Boiling Coefficients, Chem. Engng. Prog., Vol. 47, pp. 317–324, 1951.

    Google Scholar 

  36. Myers, J. E, and Katz, D. L., Boiling Coefficients Outside Horizontal Tubes, Chem. Engng. Prog. Symp. Ser. No 5, Vol. 49, pp. 107–114, 1953.

    Google Scholar 

  37. Wallner, R., Boiling Heat Transfer in Flooded Shell and Tube Evaporators, Proc. 13th Int. Congress of Refrigeration, Paper 2.19, pp. 185–191, 1971.

    Google Scholar 

  38. Montgomery, R. T. and Park, E. L., Jr., A Study of Nucleate Boiling of Hydrocarbons from Multiple Tube Arrays, AIChE Preprint 6 for 12th Nat. Heat Trans. Conf., Tulsa, OK, August 1971.

    Google Scholar 

  39. Wall, K. W. and Park, E. L., Jr., Nucleate Boiling of N-Pentane, N-Hexane and Several Mixtures of the Two from Various Tube Arrays, Int. J. Heat Mass Trans., Vol. 21, pp. 73–75, 1978.

    Article  Google Scholar 

  40. Wallner, R., Heat Transfer in Flooded Shell and Tube Evaporators, 5th Int. Heat Transfer Conf., Tokyo, Vol. 5, pp. 214–217, 1974.

    Google Scholar 

  41. Fujita, Y., Ohta, H., Yoshida, K. Hidaka, S., and Nishikawa, K., Nucleate Boiling Heat Transfer in Horizontal Tube Bundles (1st Report; Experimental Investigation on Tube Bundle Effect), Memoirs of the Faculty of Engineering. Kyushu University, Vol. 44, No. 4, pp. 427–446, 1984.

    Google Scholar 

  42. Fujita, Y., Ohta, H., Hidaka, S., and Nishikawa, K., Nucleate Boiling Heat Transfer on Horizontal Tubes in Bundles, 8th Int. Heat Transfer Conf., San Fransicso, Vol. 5, pp. 2131–2136, 1986.

    Google Scholar 

  43. Nelson, P. J. and Burnside, B. M., Boiling the Immiscible Water/N-Nonane System from a Tube Bundle, Int. Heat Mass Transfer, Vol. 28, pp. 1257–1267, 1985.

    Article  Google Scholar 

  44. Ahmad, H. A., Nelson, P. J., and Burnside, B. M., Boiling Water and Three Immiscible Organic Liquids over a Small Tube Bundle of Atmospheric Pressure, 8th Int. Heat Transfer Conf., San Francisco, Vol. 4, pp. 2093–2098, 1986.

    Google Scholar 

  45. Slesarenko, V. N., Rudakova, A. Y., and Zakharov, G. A., Effect of Operating Conditions and Tube Bundle Geometry on Boiling Heat Transfer, Heat Transfer-Sov. Res., Vol. 14, No. 2, pp. 119–123, 1982.

    Google Scholar 

  46. Guttinger, M., Die Verbesserung Des Waermeubergangs Bei Der Verdampfung in Ueberflueteten Rohrbuendel verdampfern, Heat Trans, 1970, Vol. 1, Elsevier Publishing Company: Amsterdam, Paper No. HE2.4, 1970.

    Google Scholar 

  47. Schuller, R. B. and Cornwell, K., Dryout on the Shell-side of Tube Bundles, 1st U.K. National Conference on Heat Transfer, Inst. Chem. Engn. Symp. Ser. No. 86, Vol. 2, pp. 795–804, 1984.

    Google Scholar 

  48. Nakajima, K. I. and Morimoto, K., Boiling Heat Transfer on Outside Wall of Horizontal Tube Bundles for Freon 11 and 12, Refrigeration (Japanese), Vol. 44, No. 495, pp. 3–15, 1969.

    Google Scholar 

  49. Nakajima, K. I. and Shiozawa, A., An Experimental Study on the Performance of a Flooded Type Evaporator, Heat Trans.-Jap. Res., Vol. 4, No. 4, pp. 49–66, 1975.

    Google Scholar 

  50. Grant, I. D. R., Cotchin, C. D., and Henry, J. A. R., Tests on a Small Kettle Reboiler, Heat Exchangers for Two-Phase Applications, HTD-Vol. 27, ASME, New York, pp. 41–45, 1980.

    Google Scholar 

  51. Cornwell, K. and Leong, L. S., On the Analysis of Low Quality Flow Boiling, Int. J. Heat Fluid Flow, Vol. 1, No. 2, pp. 63–69, 1979.

    Article  Google Scholar 

  52. Cornwell, K., Einarsson, J. G., and Andrews, P. R., Studies on Boiling in Tube Bundles, 8th Int. Heat Transfer Conf., San Francisco, Vol. 5, pp. 2137–2141, 1986.

    Google Scholar 

  53. Hwang, T. H. and Yao, S. C., Forced Convective Boiling in Horizontal Tube Bundles, Int. Heat Mass Transfer, Vol. 29, pp. 785–794, 1986.

    Article  Google Scholar 

  54. Hwang, T. H. and Yao, S. C., Crossflow Boiling Heat Transfer in Tube Bundles, Int. Comm. Heat Mass Transfer, Vol. 13, pp. 493–502, 1986.

    Article  Google Scholar 

  55. Chen, J., A Correlation for Boiling Heat Transfer to Saturated Fluids in Convective Flow, I&EC Proc. Pes. Dev., Vol. 5, No. 3, pp. 322–329, 1966.

    Article  Google Scholar 

  56. Bennett, D. L., Davis, M. W., and Hertzler, B. L., The Suppression of Saturated Nucleate Boiling by Forced Convective Flow, AIChE Symp. Ser. No. 199, Vol. 76, pp. 91–103, 1980.

    Google Scholar 

  57. Hewitt, G. F., Industrial Aspects of Gas Liquid Two-Phase Flow, Two-Phase Flows and Heat Transfer, Eds. S. Kakac and T. N. Veziroglu, Hemisphere Publishing Corporation, Washington, D.C., 1976.

    Google Scholar 

  58. Brisbane, T. W. C., Grant, I. D. R., and Whalley, P. B., A Prediction Method for Kettle Reboiler Performance, ASME Paper No 80-HT-42, 1980.

    Google Scholar 

  59. Chan, A. M. C. and Shoukri, M., Boiling Heat Transfer and Burnout Around Horizontal Tube Bundles, in Fundamentals of Phase Change: Boiling and Condensation, ASME, HTD-Vol. 38, pp. 1–8, 1984.

    Google Scholar 

  60. Hasan, M. M., Eichhorn, R., and Leinhard, J. H., Burnout During Flow Across a Small Cylinder Influenced by Parallel Cylinders, 7th Int. Heat Trans. Conf., Munich, Vol. 4, pp. 285–290, 1982.

    Google Scholar 

  61. Cumo, M., Farello, G. E., Gasiorowski, J., Iovino, G., and Naviglio, A., Quality Influence on the Departure from Nucleate Boiling in Crossflows Through Bundles, Nuclear Technology, Vol. 49, pp. 337–346, 1980.

    Google Scholar 

  62. Fokin, B. S. and Goldberg, E. N., Model of Boiling Crisis Under Conditions of Free Convection in a Bundle of Horizontal Pipes Flushed with Air, High Temp., Vol. 18, pp. 806–810, 1980.

    Google Scholar 

  63. Lord, R. C., Minton, P. E., and Slusser, R. P., Design Parameters for Condensers and Reboilers, Chem. Engng., pp. 127–134, March 23, 1970.

    Google Scholar 

  64. Jensen, M. K. and Pourdashti, M., Critical Heat Flux on a Horizontal Cylinder in an Upward Subcooled and Low-Quality Two-Phase Crossflow, J. Heat Trans., Vol. 108, pp. 441–447, 1986.

    Article  Google Scholar 

  65. Hwang, T.-H. and Yao, S. C., Boiling Heat Transfer of a Horizontal Cylinder at Low Quality Crossflow, Fundamentals of Phase Change: Boiling and Condensation, Eds. C. T. Avedision and T. M. Rudy, ASME, New York, HTD-Vol. 38, pp. 9–17, 1984.

    Google Scholar 

  66. Lienhard, J. H. and Dhir, V. K., Hydrodynamic Prediction of Peak Boiling Heat Fluxes from Finite Bodies, J Heat Transfer, Vol. 95, pp. 152–158, 1973.

    Article  Google Scholar 

  67. Kern, D. Q., Process Heat Transfer, McGraw-Hill, 1950.

    Google Scholar 

  68. Zuber, N., On Stability of Boiling Heat Transfer, J. Heat Trans., Vol. 80, pp. 711–720, 1958.

    Google Scholar 

  69. Fair, J. R., Vaporizer and Reboiler Design Part I, Chem. Engng., Vol. 70, pt. 3, pp. 119–124, July 8, 1963.

    Google Scholar 

  70. Fair, J. R., Vaporizer and Reboiler Design Part II, Chem. Engng., Vol. 70, pt. 3, pp. 101–104, August 5, 1963.

    Google Scholar 

  71. Zinemanas, D., Hasson, D., and Kehat, E., Simulation of Heat Exchangers with Change of Phase, Comp. Chem. Engng., Vol. 8, pp. 367–375, 1984.

    Article  Google Scholar 

  72. Carlucci, L. N., Galpin, P. F., and Brown, J. D., Numerical Predictions of Shellside Heat Exchanger Flows, in A Reappraisal of Shellside Flow in Heat Exchangers, Eds. W. J. Marner and J. M. Cheroweth, ASME, New York, HTD-Vol. 36, pp. 19–26, 1984.

    Google Scholar 

  73. Kutateladze, S. S., Boiling Heat Transfer, Int. Heat Mass Transfer, Vol. 4, pp. 31–45, 1961.

    Article  Google Scholar 

  74. Bergles, A. E., Enhancement of Heat Transfer, 6th Int. Heat Transfer Conf., Toronto, Vol. 6, pp. 89–108, 1978.

    Google Scholar 

  75. Webb, R. L., The Evolution of Enhanced Surface Geometries for Nucleate Boiling, Heat Transfer Engng., Vol. 2, No. 3–4, pp. 46–69, 1981.

    Article  Google Scholar 

  76. Danilova, G. N. and Dyundin, V. A., Heat Transfer with Freons 12 and 22 Boiling at Bundles of Finned Tubes, Heat Transfer — Sov. Res., Vol. 4, No. 4, pp. 48–54, 1972.

    Google Scholar 

  77. Müller, J. and Hahne, E., Boiling Heat Transfer in Finned Tube Bundles, Heat Transfer-Sov. Res., Vol. 13, No. 6, pp. 19–25, 1981.

    Google Scholar 

  78. Hahne, E. and Müller, J., Boiling on a Finned Tube and a Finned Tube Bundle, Int. Heat Mass Transfer, Vol. 26, pp. 849–859, 1983.

    Article  Google Scholar 

  79. Yilmaz, S. and Palen, J. W., Performance of Finned Tube Reboilers in Hydrocarbon Service, ASME Paper No. 84-HT-91, 1981.

    Google Scholar 

  80. Jho, S. G., Simada, R., Kumagai, S. and Takeyama, T., Theoretical Study on Boiling Heat Transfer from Finned Tube Bundles, Heat Transfer-Jap. Res., Vol. 14, No. 4, pp. 44–59, 1985.

    Google Scholar 

  81. Windisch, R. and Hahne, E., Heat Transfer for Boiling on Finned Tube Bundles, Int. Comm. Heat Mass Transfer, Vol. 12, pp. 355–368, 1985.

    Article  Google Scholar 

  82. Arai, N. Fukushima, T., Arai, A., Nakajima, T., Fujie, K., Nakayama, Y., Heat Transfer Tubes Enhancing Boiling and Condensation in Heat Exchangers of a Refrigerating Machine, ASHRAE Trans., Vol. 83, Part 2, pp. 58–70, 1977.

    Google Scholar 

  83. Yilmaz, S., Palen, J. W., and Taborek, J., Enhanced Boiling Surfaces as Single Tubes and Tube Bundles, Advances in Enhanced Heat Transfer-1981, Eds. R. L. Webb et al., ASME, New York, HTD-Vol. 18, pp. 123–129, 1981.

    Google Scholar 

  84. Stephan, K. and Mitrovic, J., Heat Transfer in Natural Convective Boiling of Refrigerants and Refrigerant-Oil-Mixtures in Bundles of T-Shaped Finned Tubes, Advanced in Enhanced Heat Transfer-1981, Eds. R. L. Webb et al., ASME, New York, HTD-Vol. 18, pp. 131–146, 1981.

    Google Scholar 

  85. Czikk, A. M., Gottzmann, C. F., Ragi, E. G., Withers, J. G. and Habdas, E. P., Performance of Advanced Heat Transfer Tubes in Refrigerant-Flooded Liquid Coolers, ASHRAE Trans., Vol. 76, pp. 96–109, 1970.

    Google Scholar 

  86. Milton, R. M. and Gottzmann, CF., High Efficiency Reboilers and Condenser, Chem. Engng. Prog., Vol. 68, pp. 56–61, 1972.

    Google Scholar 

  87. Gottzmann, C. F., O’Neill, P. S., and Minton, P. E., High Efficiency Heat Exchangers, Chem. Engng. Prog., Vol. 69, pp. 69–75, 1973.

    Google Scholar 

  88. Lewis, L. G. and Sather, N. F., OTEC Performance Tests of the Union Carbide Flooded-Bundle Evaporator, Argonne National Lab Report No. ANL/OTEC-PS-1, 1978.

    Google Scholar 

  89. O’Neill, P. S., Ragi, E. G., and Jacobs, M. L., Effective Use of High Flux Tubing in Two-Phase Heat Transfer, Preprint for AIChE 86th National Meeting, Houston, April 1979.

    Google Scholar 

  90. Fricke, H. D. and Czikk, A. M., Enhanced OTEC Sprayed Bundle Evaporator Performance Studies, Advances in Enhanced Heat Transfer, Eds. J. M. Chenoweth et al., ASME, New York, pp. 23–29, 1979.

    Google Scholar 

  91. O’Neill, P. S., King, R. C., and Ragi, E. G., Application of High Performance Evaporator Tubing in Refrigeration Systems of Large Olefins Plants, AIChE Symp. Ser. No. 199. Vol. 76, pp. 289–300, 1980.

    Google Scholar 

  92. Bukin, V. G., Danilova, G. N., and Dyundin, V. A., Heat Transfer from Freons in a Film Flowing over Bundles of Horizontal Tubes that Carry a Porous Coating, Heat Transfer-Sov. Res., Vol. 14, No. 2, pp. 98–103, 1982.

    Google Scholar 

  93. Koyama, Y. and Hashizume, K., Boiling Heat Transfer on Outside of Horizontal Tube Bundles, 16th Int. Cong, of Refrigeration. Proc., Vol. 2, pp. 171–177, 1983.

    Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Department of Mechanical Engineering, Aeronautical Engineering and Mechanics, Rensselaer Polytechnic Institute, Troy, NY, 12180-3590, USA

    Michael K. Jensen

Authors
  1. Michael K. Jensen
    View author publications

    You can also search for this author in PubMed Google Scholar

Editor information

Editors and Affiliations

  1. Department of Mechanical Engineering, University of Miami, Coral Gables, Florida, USA

    Sadik Kakaç

  2. Department of Mechanical Engineering, Rensselaer Polytechnic Institute, Troy, New York, USA

    Arthur E. Bergles

  3. Department of Mechanical Engineering, University of Porto, Porto Codex, Portugal

    E. Oliveira Fernandes

Rights and permissions

Reprints and permissions

Copyright information

© 1988 Kluwer Academic Publishers

About this chapter

Cite this chapter

Jensen, M.K. (1988). Boiling on the Shellside of Horizontal Tube Bundles. In: Kakaç, S., Bergles, A.E., Fernandes, E.O. (eds) Two-Phase Flow Heat Exchangers. NATO ASI Series, vol 143. Springer, Dordrecht. https://doi.org/10.1007/978-94-009-2790-2_24

Download citation

  • DOI: https://doi.org/10.1007/978-94-009-2790-2_24

  • Publisher Name: Springer, Dordrecht

  • Print ISBN: 978-94-010-7755-2

  • Online ISBN: 978-94-009-2790-2

  • eBook Packages: Springer Book Archive

Publish with us

Policies and ethics

Search

Navigation