Abstract
Lasers provide the unique tool for high quality surface modification. With the development of continuous wave (CW) CO2 lasers of high output power, surface modification technology is rapidly growing in the identification of new and improved processing methods. Many surface-related failures by mechanisms involving wear, corrosion, erosion or high temperature oxidation can be minimized by laser surface modification techniques such as laser surface alloying, laser cladding, laser chemical vapor deposition (LCVD) and laser ablation. Laser ablation is a relatively new application for laser assisted coating and is used extensively for high T c superconducting films; it has almost become a field in itself. This chapter does not cover laser ablation.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Draper, C.W. and Ewing, C.A. (1984) J. Mater. Sci, 19, 3815.
Draper, C.W. and Poate, J.M. (1985) Int. Met. Rev, 30(2), 85.
Steen, W.M. (1985) Surface engineering with a laser. Metals and Materials, 1, 730.
Draper, C.W. (1981) Appl. Opt, 20, 3083.
Draper, C.W. (1981) Lasers in Metallurgy (eds K. Mukherjee and J. Mazumder), The Metallurgical Society of AIME, Warrendale, PA, pp. 67–92.
Chande, T. and Mazumder, J. (1983) Metall. Trans. B, 14, 181.
Chande, T. and Mazumder, J. (1983) Opt. Eng, 22, 362.
Chande, T. and Mazumder, J. (1982) Appl. Phys. Lett, 41, 42.
Weinman, L.S., DeVault, J.N. and Moore, P. (1979) Application of Lasers in Materials Processing (ed. E.A. Metzbower), ASM, Metals Park OH, p. 245.
Moore, P.G. and Weinman, L.S. (1979) Laser applications in materials processing, in SPIE Proc, (ed. J.F. Ready), Vol. 198, p. 120.
Christodoulu, G. and Steen, W.M. (1983) Lasers in Materials Processing (ed. E.A. Metzbower) ASM, Metals Park OH.
Molian, P.A. (1982) Scripta Metall, 16, 65.
Molian, P.A. (1983) Mater. Sci. Engng, 50, 241.
Molian, P.A. (1983) Mater. Sci. Engng, 58, 175.
Draper, C.W. et al. (1981) Appl. Surf. Sci, 7, 276–80.
Draper, C.W. et al. (1981) Thin Solid Films, 75, 237.
Draper, C.W. et al. (1981) Thin Solid Films, 75, 419–24.
Bykovskii, Y.A., Kulikauskas, V.S., Novolin, V.N. and Khabelashivili, T.D. (1982) Ah. Tekh. Fiz, 52(1): 61–3.
Jain, A.K. et al. (1982) Rad. Effects, 63, 175.
Jain, A.K. et al. (1982) Rad. Effects, 53, 175–81.
Draper, C.W. et al. (1982) Laser and Electron Beam Interactions with Solids (eds. B.R. Appleton and G.K. Celler), North-Holland, Amsterdam, pp. 413–18.
Walker, A.M. (1985) Ph.D. thesis, London University.
Bergmann, H.W. and Mordike, B.L. (1980) Z. Metalldke, 71, 658–65.
Bergmann, H.W. and Mordike, B.L. (1981) Z. Werkstofftech, 12, 142.
Bergmann, H.W. and Mordike, B.L. (1981) J. Mater. Sci, 16, 863–9.
Bergmann, H.W. and Mordike, B.L. (1981) J. Mater. Sci, 16, 497–503.
Gnanamuthu, D.S. (1980) Opt. Eng, 19, 783–92.
Man, C. (1984) Ph.D. thesis, London University.
Lamb, M., Man, H.C., Steen, W.M. and West, D.R.F. (1983) The properties of laser surface melted stainless steel and boronised mild steel, in Proceedings of CISFFEL, Lyon, CEA, Paris, Vol. 1, pp. 227–34.
Chande, T., Ghosh, A. and Mazumder, J. (1987) Surf. Engng, Jan. 1987.
Ayers, J.D., Schaefer, R.J. and Robey, W.P. (1981) J. Met, 33(8): 19–23.
Ayers, J.D. and Tucker, T.R. (1980) Thin Solid Films, 73, 201–7.
Sepold, G. (1981) in Proceedings of the International Conference on Surface Technology 1981 (ed. C. Rohrback), VDI-Verlag, Dusseldorf, pp. 323–30.
Megaw, J.H.P.C. (1980) Surf J, 22, 6–11.
Bergmann, H.W., Bell, T. and Lee, S. (1985) Thermochemical treatment of titanium alloys with lasers (laser gas alloying), in Proceedings of Laser ′85, Munich.
Walker, A.M., Folkes, J., Steen, W.M. and West, D.R.F. (1985) Surf. Engng, 1(1).
Kovalenko, V.S., Volgin, V.I. and Mikhailov, V.V. (1977) Tekh. Organ. Proizvod, 3, 50–2.
Swager, W.L. (1980) Battelle Today, 18, 3–6.
Mirkin, L.I. (1971) Laser beam promoted saturation of iron by tungsten. Br. Iron and Steel Inst. Trans, No. 9382 (translated from Izvestiya Vysskilkh Uchebnykh Azvendnii Chernaya Metallurgiya, 14(2), 98).
Gasuko, I.V., Krapivin, L.L. and Mirkin, L.I. (1974) Sov. Powd. Metall. Met. Ceram, 113(1), 27.
Belforte, D.A. (1978) Laser surface treatment. Presented at the Colloquium on Lasers and Electro-Optical Equipment, Tokyo, Japan.
Cunningham, F.E. (1964) The use of lasers for the production of surface alloys. MSc thesis, MIT, Cambridge MA.
Mirkin, L.I. (1969) Sov. Phys. Dok, 14(5), 494.
Schmidt, A.O. (1969) Trans. ASME B, J. Engng for Ind, 91(3), 549.
Seaman, F.D. and Gnanamuthu, D.S. (1975) Met. Prog, 108(3).
Hella, R.A. (1978) Opt. Eng, 17(3), 198.
Brower, W.E. Jr., Strachan, R. and Flemings, M.C. (1970) Cast Met. Res. J, 6(4), 176.
Molian, P.A. and Wood, W.E. (1982) Mater. Sci. Engng, 56, 271–7.
Molian, P.A. and Wood, W.E. (1982) Scripta Metall, 15, 1301
Molian, P.A. and Wood, W.E. (1983) J. Mater. Sci, 18, 2563–71.
Moore, P.G. and McCaffery, E. (1981) J. Electrochem. Soc, 128, 1391.
Lumsden, J.B., Gnanamuthu, D.S. and Moores, R.J. (1982) Corrosion of Metals Processed by Directed Energy Beams (eds C.R. Clayton and C.M. Preece), The Metallurgical Society of AIME, Warrendale PA, pp. 129–34.
Lin, C.J. and Spaepen, F. (1982) Appl. Phys. Lett, 41, 721–3.
Gorogina, G.G. et al. (1981) Dokl. Akad. Nauk SSSR, 259, 826–9 (Sov. Phys. Dokl, 26, 761–3).
Inal, A.O. (1980) J. Mater. Sci, 15, 1947–52.
Samure, K.O., Shibur, K., Shingu, P.H. and Murakeme, Y. (1979) J. Mater. Sci, 14, 945–52.
Inal, O.T, Murr, L.E. and Yost, F.G. (1981) Mater. Sci. Engng, 51, 101–10.
Picraux, S.T. et al. (1981) Laser and Electron-Beam Solid Interactions and Materials Processing (eds J.F. Gibbons et al.), North-Holland, New York, pp. 575–82.
Elliott, R.P. (1965) Constitution of Binary Alloys, First Supplement, McGraw-Hill, New York.
Shunk, F.A. (1969) Constitution of Binary Alloys, Second Supplement, McGraw-Hill, New York.
Hansen, M. and Anderko, K. (1958) Constitution of Binary Alloys, McGraw-Hill, New York.
Draper, W.C. (1981) Laser surface alloying: the state of the art, in Lasers in Metallurgy (eds K. Mukherjee and J. Mazumder), The Metallurgical Society of AIME, New York, pp. 67–93
Draper, W.C. (1981)J. Met, 34(6), 24.
Follstaedt, D.M. (1982) Metallurgy and microstructures of pulse melted alloys, in Laser and Electron-Beam Interactions with Solids. Proceedings of the 1981 Materials Research Society, Vol. 4 (eds B.R. Appleton and G.K. Celler), Elsevier, New York, pp. 377–88.
Sood, O.K. (1982) Rad. Effects, 63, 141.
Draper, C.W. and Poate, J.M. (1983) Laser surface alloying, in Surface Modification and Alloying (eds J.M. Poate, G. Foti and D.C. Jacobson), Plenum, New York, Ch. 13.
Snow, D.B., Breinan, E.M. and Kear, B.H. (1980) Rapid solidification processing of superalloys using high power lasers, in Superalloys 1980. Proceedings of the Fourth International Symposium on Superalloys (eds J.K. Tien et al.), Metals Park OH, pp. 183–203.
Breinan, E.M., Snow, D.B. and Brown, C.O. (1981) Program to investigate advanced laser processing of materials. Final report to Office of Naval Research N00014-C-0387.
Li, L.J. and Mazumder, J. (1985) Laser Processing of Materials (eds K. Mukherjee and J. Mazumder), The Metallurgical Society of AIME, Warrendale PA, p. 35.
Weerasinghe, V.M. and Steen, W.M. (1983) Lasers in Materials Processing (ed. E. Metzbower), ASM, Metals Park OH, p. 166.
Steen, W.M., Weerasinghe, V.M. and Monson, P. (1986) High power lasers and their industrial applications. SPIE Proc. 650, p. 226.
Steen, W.M. (1991) Laser Materials Processing, Springer-Verlag, London.
Belmondo, A. and Castagna, M. (1979) Thin Solid Films, vol, 249.
Mazumder, J., Liu, Y., Kar, A. and Shibata, K. (1994) Nonequilibrium synthesis with lasers: atom to automobile, in Proceedings of the 8th Surface Modification Technologies Conference, Emptek Publishing.
Breinan, E.M. and Kear, B.H. (1983) Rapid solidification laser processing at higher power density, in Laser Materials Processing (ed. M. Bass), North-Holland, Amsterdam.
Savage, S.J. and Froes, F.H. (1984) J. Met, 36(4), 20–33.
Bloembergen, N. (1979) Laser Solid Interactions and Laser Processing (eds S.D. Ferris, H.J. Leamy and J.M. Poate) AIP Conference Proceedings, vol. 50, pp. 1–20.
Von Allmen, M., Huber, E, Blatter, A. and Affostler, K. (1984) Int. J. Rapid Solidification, 7, 15–28.
Affolter, K. and Von Allmen, M. (1984) Appl. Phys. A, 33, 93.
Kar, A. and Mazumder, J. (1987) J. Appl. Phys, 61(7), 2645–55.
Mazumder, J., Cusano, C., Ghosh, A. and Eiholzer, C. (1985) Laser Processing of Materials (eds K. Mukherjee and J. Mazumder), The Metallurgical Society of AIME, Warrendale PA, p. 199.
Singh, J. and Mazumder, J. (July, 1986) Mater. Sci. Technol, 2, 709.
Singh, J. and Mazumder, J. (1987) Metall. Trans. A, 18(2), 313–22.
Singh, J. and Mazumder, J. (1987) Acta. Metall, 35(8), 1995–2003.
Singh, J. and Mazumder, J. (1988) Metall. Trans. A, 19(8), 1981–90.
Choi, J. and Mazumder, J. (1994) J. Mater. Sci, 29, 4460–76.
Singh, J., Nagarathnam, K. and Mazumder, J. (1987) in Proceedings of the High Temperature Coatings Conference, Orlando FL, The Metallurgical Society of AIME, Warrendale PA.
Sircar, S., Ribaudo, C. and Mazumder, J. (1989) Metall. Trans. A, 20(11), 2267–77.
Ribaudo, C. and Mazumder, J. (1989) Mater. Sci. Engng, A121, 531–8.
Ribaudo, C., Sircar, S. and Mazumder, J. (1989) Metall. Trans. A, 20(11), 2489–97.
Takeda, T, Steen, W.M. and West, D.R.F. (1985) ICALEO-84, Laser Institute of America.
Jain, A.K., Kulkarni, V.N. and Sood, D.K. (1982) Rad. Effects, 53, 183.
Steen, W.M. and Courtney, C.G.H. (1980) Metals Technol, June 1980, pp. 232–7.
Powell, J. and Steen, W.M. (1981) Lasers in Metallurgy, The Metallurgical Society of AIME, Warrendale PA, pp. 94–104.
Ehrlich, D.J. and Tsao, J.Y. (1983) in Proceedings of the European Physical Society Meeting, Mauterndorf, Austria, Springer-Verlag, New York.
Ehrlich, D.J. and Tsao, J.Y. (1983) J. Vac. Sci. Technol, B1(4), 969.
Mazumder, J. and Allen, S.D. (1979) SPIE, 198, 73.
Powell, C.F., Cambell, I.E. and Gonser, B.W. (1955) Vapor Plating, Wiley, New York.
Carlton, H.E. and Oxley, J.H. (1966) AIChE. J, 12, 86.
West, G.A, Gupta, A. and Beeson, K.W. (1985) Appl. Phys. Lett, 47, 476–8.
Eden, J.G. (1992) Photochemical Vapor Deposition, Wiley, New York.
Allen, S.D. (1981) J. Appl. Phys, 52, 6501.
Allen, S.D. et al. (1982) J. Vac. Sci. Technol, 20, 469.
Steen, W.M. (1978) in Proceedings of the International Conference on Advances in Surface Coating, London, p. 175.
Chen, X. (1994) Ph.D. thesis, University of Illinois at Urbana-Champaign.
Chen, X. and Mazumder, J. (1994) Appl. Phys. Lett, 65(3), 298–300.
Chen, X. and Mazumder, J. (1994) J. Appl. Phys, 76(6), 3914–16.
Chen, X. and Mazumder, J. (1995) Laser chemical vapor deposition of titanium nitride. Phys. Rev. B 52, 5947.
Kato, A. and Tamari, N. (1975) J. Cryst. Growth, 29, 55.
Tsao, C.J., Chen, E.B. and Miao, H.F. (1986) Trans. Inst. Mining Met, 95, 63.
Peterson, J.R. (1974) J. Vac. Sci. Technol, 11, 715.
Takahashi, T. and Suzuki, Y. (1974) J. Jpn. Inst. Chem, 30, 1043.
Kim, M.S. and Chun, J.S. (1983) Thin Solid Films, 107, 129.
You. M.S., Nakanishi, N. and Kato, E. (1991) J. Electrochem. Soc, 138, 1394.
Davis, K.A., Brezinsky, K. and Glassman, I. (1991) Combust. Sci. Technol, 77, 171.
Conde, O., Kar, A. and Mazumder, J. (1992) J. Appl. Phys, 72, 754.
Nakanishi, N, Mori, S. and Kato, E. (1990) J. Electrochem. Soc, 137, 322.
Cao, Z.R., Du, Y.S. and Miao, H.F. (1989) Surf. Engng, 5, 315.
Sadahiro, T., Cho, T. and Yamaya, S. (1977) J. Jpn. Inst. Met, 41, 542.
Yoshikawa, N., Aikawa, H. and Kikuchi, A. (1992) J. Jpn. Inst. Met, 56, 1132.
Lydtin, H. (1972) in Proceedings of the Third International Conference on Chemical Vapor Deposition (ed. F.A. Glaski), American Nuclear Society, Hinsdale, IL, p. 121.
Berg, R.S. and Mattox, D.M. (1972) in Proceedings of the Third International Conference on Chemical Vapor Deposition (ed. F.A. Glaski), American Nuclear Society, Hinsdale, IL, p.196.
Berg, R.S. and Mattox, D.M. (1972) in Proceedings of the Fourth International Conference on Chemical Vapor Deposition (ed. F.A. Glaski), American Nuclear Society, Hinsdale, IL, p. 121.
Christensen, CP. and Larkin, K.M. (1978) Appl. Phys. Lett, 32, 254.
Ehrlich, D.J. et al. (1981) Appl. Phys. Lett, 39, 957.
Ehrlich, D.J. and Tsao, J.Y. (1982) Appl. Phys. Lett, 41, 297.
Ehrlich, D.J. et al. (1981) Appl. Phys. Lett, 38, 946.
Ehrlich, D.J. and Osgood, R.M. Jr. (1982) Thin Solid Films, 90, 287.
Wood, T.H., White, J.C. and Thacker, B.A. (1983) Appl. Phys. Lett, 42, 408.
Rytz-Froideraux, Y., Salathe, R.P. and Gilgen, H.H. (1983) in Laser Diagnostics and Photochemical Processing for Semiconductor Devices, (eds R.M. Osgood et al.) North-Holland, New York, pp. 29–34.
Kitai, A. and Wolga, G.J. (1983) in Surface Modification and Alloying (eds J.M. Poate, G. Foti and D.C. Jacobson) Plenum, New York, pp. 141, 147.
Rigby, L.J. (1969) Trans. Faraday Soc, 65, 2421.
Boyer, P.K. et al. (1982) Appl. Phys. Lett, 40, 716.
Deutsch, T.F., Silversmith, D.J. and Mountain, R.W. (1983) in Surface Modification and Alloying (eds J.M. Poate, G. Foti and D.C. Jacobson), Plenum, New York, p. 129–34.
Solanki, R. and Collins, GJ. (1983) Appl. Phys. Lett, 42, 662.
Calloway, A.R., Galantowicz, T.A. and Fenner, W.R. Aerospace Report AIR-82(8477)-1; Calloway, A.R, Galantowicz, T.A. and Fenner, W.R. (1983) J. Vac. Sci. Technol, A1, 534.
Andreatta, R.W. et al. (1982) Appl. Phys. Lett, 40, 183.
Aylett, M.R. and Haigh, J. (1983) in Surface Modification and Alloying (eds J.M. Poate, G. Foti and D.C. Jacobson), New York, pp. 177–82.
Solanki, R., Boyer, P.K. and Collins, G.J. (1982) Appl. Phys. Lett, 41, 1048
Solanki, R., Boyer, P.K., Mahan, J.E. and Collins, G.J. (1981) Appl. Phys. Lett, 38, 572.
Coombe, R.D. and Wodarczyk, F.J. (1980) Appl. Phys. Lett, 37, 846.
Hanabusa, M., Akira Namiki and Yoshihara, K. (1979) Appl. Phys. Lett, 35, 626.
Gattuso, T, Meunier, R.M., Adler, D. and Haggerty, J.S. (1983) in Surface Modification and Alloying (eds J.M. Poate, G. Foti and D.C. Jacobson), Plenum, New York, pp. 215–22.
Haggerty, J.S. (1983) in Proceedings of the International Conference on Ultrastructure Processing of Ceramics, Glasses and Composites 13–17 Feb. 1983, Gainesville FL, Wiley, New York.
Cannon, W.R. et al. (1982) J. Amer. Ceram. Soc, 65, 324.
Ehrlich, D.J. and Osgood, R.M. Jr. (1981) Chem. Phys. Lett, 79, 381.
Tsao, J.Y. et al. (1983) Appl. Phys. Lett, 42, 559.
Rytz-Froidevaux, Y. et al. (1982) Appl. Phys. Lett, A27 133.
Bottka, N., Walsh, D.J. and Dalbey, R.Z. (1983) J. Appl. Phys, 54, 1104.
Chen, C.J. and Osgood, R.M. Jr. (1983) in Surface Modification and Alloying (eds J.M. Poate, G. Foti and D.C. Jacobson), Plenum, New York, pp. 169–75.
Karlicek, R.F.F., Donnelly, V.M. and Collins, G.J. (1982) J. Appl. Phys, 53, 1084.
Micheels, R.H. et al. (1981) Appl. Phys. Lett, 37, 418.
Amone, C. et al. (1980) Appl. Phys. Lett, 37, 665.
Bauerle, D. et al. (1983) Appl. Phys. Lett, A30, 147.
Von Gutfeld, R.J. et al. (1979) Appl. Phys. Lett, 35, 651.
Von Gurtfeld, R.J. et al. (1982) IBM J. Res. Dev, 26, 136.
Von Gutfeld, R.J. and Hodgson, R.T. (1982) Appl. Phys. Lett, 40, 352.
Von Gutfeld, R.J. and Puippe, J.C. (1981) Oberflache-Surface, 22, 9.
Leyendecker, G. et al. (1981) Appl. Phys. Lett, 39, 921.
Rytz-Froideavaux, Y., Salathe, R.P. and Gilgen, H.H. (1981) Appl. Phys. Lett, 84A, 216.
Salathe, R.P., Gilgen, H.H. and Rytz-Froidevaux, Y. (1981) IEEE J. Quantum Electron, QE17, 1989.
Herman, J.R. et al. (1983) in Surface Modification and Alloying (eds J.M. Poate, G. Foti and D.C. Jacobson), Plenum, New York, pp. 9–18.
McWilliams, B.M. et al. (1983) Appl. Phys. Lett, 43, 946.
Allen, S.D. and Trigubo, A.B. (1983) J. Appl. Phys, 54, 1641.
Allen, S.D., Trigubo, A.B. and Jan, R.Y. (1983) in Surface Modification and Alloying (eds J.M. Poate, G. Foti and D.C. Jacobson), Plenum, New York, pp. 207–14.
Roth, W. et al. (1983) in Surface Modification and Alloying (eds J.M. Poate, G. Foti and D.C. Jacobson), Plenum, New York, p. 193.
Krauter, W. et al. (1983) Appl. Phys. Lett, A31, 13.
Muller, D.F., Rothschild, M. and Rhoades, C.K. (1983) in Surface Modification and Alloying (eds J.M. Poate, G. Foti and D.C. Jacobson), Plenum, New York, pp. 135–9.
Gerassimov, R.B. et al. (1982) Appl. Phys. Lett, B28, 266.
Barananskas, V. et al. (1980) Appl. Phys. Lett, 36, 930.
Allen, S.D. (1990) Private communication.
Further Reading
Allen, S.D., Copley, S.M. and Edwards, R.H. (1982) DOE report.
Antona, P.L. and Bertani, A. (1981) Surface treatment of steel by alloying with a high-power laser, in Proceedings of the 9th National Conference on Thermal Treatment, Italian Association of Metallurgists, Milan, pp. 61–4.
Ayers, J.D. (1981) Thin Solid Films, 84, 323.
Ayers, J.D. (1981) Particles Composite Surfaces by Laser Processing (eds K. Mukherjee and J. Mazumder), The Metallurgical Society of AIME, Warrendale PA.
Ayers, J.D., Tucker, T.R. and Schaefer, R.J. (1980) Wear resistant surfaces by carbide particle injection, in Proceedings of the 2nd International Conference on Rapid Solidification Processing, Claitors, Baton Rouge LA, pp. 212–20.
Battaglin, G. et al. (1982) J. Appl. Phys, 53, 3224–30.
Battaglin, G. et al. (1982) Metastable Materials Formation by Ion Implantation (eds ST. Picraux and W.J. Choyke), North-Holland, New York, pp. 327–32.
Battaglin, G et al. Mixing of Pb and Ni under ion bombardment and pulsed laser irradiation, in Proceedings of the NATO-ASI on Surface Engineering, Les Arcs, July 1983.
Battaglin, G et al. Pulsed laser treatment of Eu and La implanted in Ni: surface alloying, trapping and damage, in Proceedings of the 1983 European Materials Research Society, Strasbourg, May 1983.
Becker, R., Rothe, R. and Sepold, G. Surface alloying by means of laser beams, in Proceedings of the 3rd International Colloquium on Welding and Melting by Electrons and Laser Beam, Sept. 1983.
Belotskii, A.V., Kovalenko, V.S., Volgin, V.I. and Pschenichnyi, V.I. (1977) Fiz. I. Khim. Obrab. Mater, 3, 24.
Betaneli, A.I. et al. (1972) Fiz. I. Khim. Obrab. Mater, 6, 22.
Borovskii, I.B., Gorodoskii, D.D., Sharafeev, I.M. and Moryashchev, S.F. (1982) Sov. Phys. Dokl, 27, 259.
Brown, R. and Ayers, J.D. (1983) Solid particle erosion of Al 6061 with a laser melted and Tm particle injected surface layer, in Wear of Materials 1983 (ed. K.C. Ludema), ASME, New York, pp. 325–32.
Buene, L. et al. (1980) Appl. Phys. Lett, 37, 385.
Buene, L. et al. Appl. Phys. Lett, 37, 583–90.
Buene, L. et al. (1981) Laser-pulse melting of hafnium-implanted nickel studied with TDPAC and RBS/channeling techniques, in Nuclear and Electron Resonance Spectroscopy. Proceedings of the 1980 Materials Research Society, Vol. 3 (eds E.N. Kaufmann and G. Schenoy), Elsevier, New York, pp. 391–6.
Cappeli, P.G. (1980) Laser surface alloying, in NATO Lecture Series 106, Advisory Goup for Aerospace Research and Development, Ch. 6, pp. 1–13.
Chan, C.L., Mazumder, J. and Chen, M.M. (1984) Metall. Trans. A, 15, 2175.
Conti, C.A. et al. (1980) Laser and Electron Beam Processing of Materials, Academic Press, New York.
Copley, S.M. et al. (1979) Microstructures of surface alloyed Ag-Cu films produced by laser melt quenching, in Rapidly Quenched Metals III, Vol. 1 (ed. B. Cantor), The Metals Society, London, pp. 147–50.
Das, S., Dumler, I. and Mazumder, J. (1985) LIM-2 (ed. M.F. Kimmit), p. 73.
Dekhtyar, I.Y., Nishchenko, M.M., Bukhalenko, V.V. and Kharitonskii, S.Y. (1979) Fiz. Met. Metall, 47, 887.
Delia Mea, G. and Massoldi, P. (1979) Redistribution of Cu in polycrystalline and single crystal Al after laser irradiation, in Laser-Solid Interactions and Laser Processing. Proceedings of the 1978 Materials Research Society (eds S.D. Ferris, H.J. Leamy and J.M. Poate), AIP Conference Proceedings, New York, No. 50, pp. 212–13.
Delia Mea, G., Donna Dalle Rose, L., Mazzoldi, P. and Miotello, A. (1980) Rad. Effect, 46, 133.
Den Broeder, F.J.A, Vandenberg, J.M. and Draper, C.W. (1984) Thin Solid Films, 111, 43.
Draper, C.W., Buene, L., Poate, J.M. and Jacobson, D.C. (1981) Appl. Opt, 20, 1730.
Draper, C.W. et al. (1980) Laser alloying of deposited metal films on nickel, in Laser and Electron Beam Processing of Materials, Proceedings of the 1979 Materials Research Society (eds C.W. White and P.S. Peercy), Academic Press, New York, pp. 721–7.
Ehrlich, D.J. et al. (1980) Appl. Phys. Lett, 36, 916.
Ehrlich, D.J. et al. (1980) IEEE Electron Device Lett, EDL1.
Ehrlich, D.J., Osgood, R.M. Jr. and Deutsch, T.F. (1980) Appl. Phys. Lett, 36, 698.
Ehrlich, D.J., Osgood, R.M. Jr. and Deutsch, T.F. (1981) Appl. Phys. Lett, 38, 1018.
Ehrlich, D.J., Osgood, R.M. Jr. and Deutsch, T.F. (1981) J. Electrochem Soc, 128, 2041.
Ehrlich, D.J., Osgood, R.M. Jr. and Deutsch, T.F. (1982) J. Vac. Sci. Technol, 21, 23.
Greco, V.P. (1981) Plat. Surf. Finish, 68(3), 56.
Gurevich, M.E. et al. (1983) Phys. Status Solidi, 76, 479.
Hussain, T. and Linker, G. (1982) Solid State Commun, 44, 745–9.
Ibbs, K.G. and Lloyd, M.L. (1983) Pulsed laser treatment of virgin, self and europium implanted nickel: evidence of defect impurity interaction, pp. 333–8.
Ibbs, K.G. and Lloyd, M.L. (1984) Thermal stability of metastable phases produced by laser treatment of aluminum implanted with chromium and molybdenum, in Metastable Materials Formation by Ion Implantation. Proceedings of the 1981 Materials Research Society, Vol. 7 (eds S.T. Picraux and W.J. Choyke), Elsevier, New York, pp. 327–32.
Jacobson, C.D. et al. (1981) IEEE Trans. Nucl. Sci, 28, 1828.
Jain, A.K., Kulkarni, V.N. and Sood, D.K. (1981) Appl. Phys, 25, 127.
Jain, A.K., Kulkarni, V.N. and Sood, D.K. (1981) Nucl. Instrum. Meth, 191, 151.
Jain, A.K., Kulkarni, V.N. and Sood, D.K. (1981) Thin Solid Films, 85, 1.
Kovalenko, V.S. and Volgin, V.I. (1976) Tekh. Organ. Proizvod, 7, 60.
Lin, C.-J. and Spaepen, F. (1983) Fe-B glasses formed by a picosecond pulsed laser quenching, in Chemistry and Physics of Rapidly Solidified Materials (eds B.J. Berkowitz and R.O. Scattergood), The Metallurgical Society of AIME, New York, pp. 273–80.
Lin, C.-J. and Spaepen, F. (1983) Scripta Metall, 17, 1259.
Lin, C.-J., Spaepen, F. and Turnbull, D. (1984) J. Non-Cryst. Solids, 61–63, 767.
Miotello, A. and Dona Dalle Rose, L.F. (1982) Phys. Lett, 87A, 317.
Miotello, A., Dona Dalle Rose, L.F. and Desalvo, A. (1982) Appl. Phys. Lett, 40, 135.
Molian, P.A., Wang, P.J., Khan, K.H. and Wood, W.E. (1983) Mater. Sci. Engng, Vol, 511–15.
Molian, P.A. and Wood, W.E. (1984) Mater. Sci. Engng, 62, 271.
Mordike, B.L. and Bergmann, H.W. (1982) Surface alloying of iron alloys by laser beam melting, in Rapidly Solidified Amorphous and Crystalline Alloys. Proceedings of the 1981 Materials Research Society, Vol. 8, (eds B.H. Kear, B.C. Giessen and M. Cohen), Elsevier, New York, pp. 463–83.
Mordike, B.L., Bergmann, H.W. and Gros, N. (1983) Z. Werkstofftech, 14, 253.
Nilsson, Y. (1990) J. Electrochem. Soc, 137, 517–21.
Osgood, R.M., et al. (eds) Laser Diagnostics and Photochemical Processing for Semiconductor Devices, North-Holland, New York, 1983.
Peercy, P.S., Follstaedt, D.M., Picraux, S.T. and Wampler, W.R. (1982)Laser and Electron Beam Interactions with Solids (eds B.R. Appleton and G.K. Celler), North-Holland, New York, pp. 401–6.
Peters, J.W., Gebhart, F.L. and Hall, T.C. (1981) Solid-State Technology, Sept. 1980; Peters, J.W., in Proceedings of the Electron Device Meeting, pp. 240–3.
Pleiter, F. and Prasad, K.G. (1981) Phys. Lett, 84A, 345.
Rose, T.L. et al. (1983) Appl. Phys. Lett, 42, 193.
Sawchyn, I. and Draper, C.W. (1984) Appl. Surf. Sci, 18, 84.
Schaefer, R.J. et al. (1980) Nucl. Instrum. Meth, 168, 275.
Schaefer, R.J. and Mehrabian, R. (1983) Processing microstructure relationship in surface melting, in Laser-solid Interactions and Transient Thermal Processing of Materials (eds J. Narayan, W.L. Brown and R.A. Lemons), North-Holland, New York, pp. 733–44.
Sekula, S.T., Thompson, J.R., Beardsley, G.M. and Lowndes, D.H. (1983) J. Appl. Phys, 34, 6517.
Sepold, G. (1983) Hardening and alloying of steel surfaces by high-power laser beams, in Physical Processes in Laser/Materials Interactions (ed. M. Bertolotti), Plenum, New York, pp. 163–73.
Sepold, H.G. (1978) Hardening and alloying of steel surfaces by high-power laser beams, in Gas-Flow and Chemical Lasers (ed. J.F. Wendt), Hemisphere, Washington D.C., pp. 561–9.
Shibata, T. et al. (1980) Appl. Phys. Lett, 36, 566.
Silversmith, D.J. et al. (1983) Paper 14.3 presented at Materials Research Society Annual Meeting. November 1983.
Snow, D.B. (1980) Microstructure and mechanical properties of laser-processed Ni-Al-Mo based alloys, in Superalloys 1980. Proceedings of the Fourth International Symposium on Superalloys (eds J.K. Tien et al.), ASM, Metals Park OH, pp. 523–7.
Stritzker, B., Appleton, B.R., White, C.W. and Lau, S.S. (1982) Solid State Commun, 41, 321.
Takei, K., Fujimori, S. and Nagai, K. (1980) J. Appl. Phys, 51, 2903.
Ushakov, A.I., Gorovoy, A.M., Kazakov, V.G. and Il’Chuk, A.G. (1980) Alpha to gamma phase transition induced in Fe-Ni films by pulsed laser irradiation. Fiz. Met. Metall, 50, 440
Ushakov, A.I., Gorovoy, A.M., Kazakov, V.G. and Il’Chuk, A.G. (1980) English reference Phys. Met. Metall, 50, 189.
Wampler, W.R., Follstaedt, D.M. and Peercy, P.S. (1981) Pulsed laser annealing of aluminum, in Laser and Electron-Beam Solid Interactions and Materials Processing, Proceedings of the 1980 Material Research Society, Vol. 1 (eds J.F. Gibbons, L.D. Hess and T.W. Signmon), Elsevier, New York, pp. 567–74.
Wang, Z.L., Westendorp, J.F.M. and Saris, F.W. (1983) Nucl. lustrum. Meth, 209/210, 115.
Wittmer, M. and Von Allmen, M. (1979) J. Appl. Phys, 50, 4786.
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1996 Chapman & Hall
About this chapter
Cite this chapter
Mazumder, J. (1996). Laser assisted surface coatings. In: Stern, K.H. (eds) Metallurgical and Ceramic Protective Coatings. Springer, Dordrecht. https://doi.org/10.1007/978-94-009-1501-5_5
Download citation
DOI: https://doi.org/10.1007/978-94-009-1501-5_5
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-010-7171-0
Online ISBN: 978-94-009-1501-5
eBook Packages: Springer Book Archive