Abstract
Definition and calculation of the X-ray elastic constants (XEC) from the compliances of arbitrary structure according to the boundary assumption of Voigt and of Reuss and to the model of Kröner, mechanically quasiIsotropic and anisotropic materials. Discussion on calculated and experimentally determined XEC of thin films and of solid ceramic materials. Parameters of origin of the residual stresses in coating, interface and substrate materials.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Choilet, L., Perry A.-J., Residual stresses in CVD and PVD refractory coating, in Advances in Surface Treatmentsi Technology - Applications- Effects. Vol. 4 Residual Stresses, edited by A. Niku - Larl, Pergamon Press, Oxford, 1987, pp. 147–61.
Chollet, L., Perry, A.-J., The state of stress both In films and their substrates. In Residual Stresses in science and Technology, edited by E. Macherauch and V. Hauk, DGM Informatlonsgesellschaft Verlag, Oberursel, 1987, 1, pp. 485–92, and papers of other authors in this Issue.
Fischme1ster, H., Jehn, H., Hartstoffschlchten für Verschleiβminderung. DGM Informatlonsgesellschaft Verlag, Oberursel, 1987.
Hauk, V., Non-destructive methods of measurement of residual stresses. Same reference as 1., 251-302, and the literature therein mentioned.
Hauk, V., X-ray elastic constants (XEC) (In German). In Elgensoannung-en und Lastspannungen. Modeme Ermittlung - Ergebnisse - Bewertung. edited by V. Hauk and E. Macherauch, E., HTM Beiheft Carl Hanser Verlag, München Wien, 1982, pp. 49-57.
Dölle, H., Hauk, V., Influence of the mechanical anisotropy of the polycrystal (texture) upon the stress evalutlon by X-rays (In German).Z Metallkde. 1978, 69, 410–17.
Macherauch, E., Müller, P., Evaluation of X-ray elastic constants of cold-strained Armco-Iron and CrMo-steel (In German). Arch. Eisenhüttenwes., 29, 1958, 257–60.
Behnken, H., Hauk, V., Calculation of the X-ray elastic constants of the polycrystal from the elastic data of the single crystal for arbitrary symmetry (in German). Z. MetalIkde,. 1986, 77, 620–6, and the literature therin mentioned.
Behnken, H., Hauk, V., To be published, and the literature therin mentioned.
Sprauel, J.M., Barral, M., These proceedings.
Hauk, V., N1kolin, H.-J., To be published.
Hauk, V., Kockelmann, H., Calculation of stress distribution and of XEC of two-phase materials (In German). Z. MetalIkde.. 1977, 68, 719–24.
Hauk, V., Kockelmann, H., To the determination of stresses with X-ray on porous materials (In German). Materialprüf., 1977, 19, 148–51.
Landoit-Börnstein, Numerical Data and Functional Relationships in Science and Technology. Sprlnger-Verlag, Berlin, Heidelberg, New York, Group III, 1979, 11, 1984, 18.
Ortiz, M., Lebrun, J.L., Pochettlno, A., Maeder, G., Residual stresses In zironinum thin sheets. These proceedings.
Behnken, H., Hauk, V., Evaluation of residual stresses In Cr7C3-layers by X-rays (In German). Härterei-Tech. Mitt.. 1987, 42, 17–22.
Grellner, W., Schwetz, K.A., Pfelffer, W., Prümmer, R., Investigation of residual stresses 1n ceramic components. In Residual Stress In Science and Technology, edited by E. Macherauch and V. Hauk, DGM Informationsgesellschaft Verlag, Oberursel, 1987, 1, pp. 531–7.
Tanaka, K., Yamamoto, Y., Suzuki, K., Elastic constants of ceramics for X-ray residual stress measurement. These proceedings.
Krause, H., Juhe, H.H., Rontgenographische Elgenspannungsmessungen an aus der Gasphase abgeschledenen Titancarbidschichten. Härterei-Tech. Mitt.. 1977, 32, 302–7.
Paulat, E., Lenk, P., Wleghardt, G., Röntgenographische Bestimmung von Gltterparameter und Querkontraktlonszahl an spannungsbehafteten Carbldschlchten auf Werkzeugstahl mit Hilfe der dehnungsfreien Richtungen. Neue Hütte. 1983, 28, 113–5.
Hirsch, T., Mayr, P., Elgenspannungsmessungen an TiCN- und TiN- Hartstoffschichten. Härterei-Tech. Mitt.. 1988, 33, 212–8.
Török, E., Perry, A.J., Chollet, L., Sproul, W. D., Young’s modulus of TiN, TiC, ZrN and HfN. Thin Solid Films. 1987, 153, 37–43.
Eigenmann, B., Scholtes, B., Macherauch, E., X-ray stress determination In ceramics and ceramic-metal composites. These proceedings.
Brinksmeyer, E., Siemer, H., Calculation of X-ray elastic constants of Aluminiumoxid ceramics. These proceedings.
Yoshioka, Y., X-ray measurements of elastic constants and residual stresses In aluminia ceramics. These proceedings.
Behnken, H., Hauk, V., X-ray elastic constants and residual stresses In chromlumoxid-layers. These proceedings.
Dö11e, H., Hauk, V., Evaluation of residual stress systems arbitrarily oriented by X-rays (in German). Härterei-Tech- Mitt.. 1976, 31, 165–8.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1989 Elsevier Science Publishers Ltd
About this chapter
Cite this chapter
Hauk, V. (1989). Elastic Constants and Residual Stresses in Ceramic Coatings. In: Beck, G., Denis, S., Simon, A. (eds) International Conference on Residual Stresses. Springer, Dordrecht. https://doi.org/10.1007/978-94-009-1143-7_49
Download citation
DOI: https://doi.org/10.1007/978-94-009-1143-7_49
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-010-7007-2
Online ISBN: 978-94-009-1143-7
eBook Packages: Springer Book Archive