Abstract
Dynamic-mechanical properties (elastic modulus and internal damping) of materials may be characterized using either vibration or wave-propagation experiments. This section deals only with vibration-test methods, which cover the nominal frequency range 0.001–1000 Hz. Wave-propagation methods are not discussed here.
This section was written while the author was on sabbatical leave at the Composite Materials and Structures Center, Michigan State University, East Lansing, Michigan.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Gibson, R.F., “Dynamic Mechanical Properties of Advanced Composite Materials and Structures,” The Shock and Vibration Digest, 19 (7), 13–22 (1987).
Bert, C.W. and Clary, R.R., “Evaluation of Experimental Methods for Determining Dynamic Stiffness and Damping of Composite Materials” Composite Materials: Testing and Design (Third Conf), ASTM STP 546, ASTM, 250–265 (1974).
Bert, C. W., “Composite Materials: A Survey of the Damping Capacity of Fiber Reinforced Composites” Damping Applications for Vibration Control, ed. P.J. Torvik, ASME, AMD Vol. 38, 53–63 (1980).
Read, B.E. and Dean, G.D., The Determination of Dynamic Properties of Polymers and Composites, Adam Hilger, Ltd., Herts, England (1978).
Standard Practice for Determining and Reporting Dynamic Mechanical Properties of Plastics, ASTM Standard D 4065, ASTM (1982).
Standard Method for Measuring Vibration Damping Properties of Materials, ASTM Standard E 756, ASTM (1983).
Schapery, R.A., “Viscoelastic Behavior and Analysis of Composite Materials” Composite Materials: Vol. 2, Mechanics of Composite Materials, ed. G.P. Sendeckyj, Academic Press (1974).
Christensen, R.M., Mechanics of Composite Materials, John Wiley & Sons, New York (1979).
Jones, R.M., Mechanics of Composite Materials, McGraw-Hill, New York (1975).
Hasin, Z., “Complex Moduli of Viscoelastic Composites I: General Theory and Application to Particulate Composites” Int. J. Solids and Structures, 6, 539–552 (1970).
Hashin, Z., “Complex Moduli of Viscoelastic Composites II”, Int. J. Solids and Structures, 6, 797–807 (1970).
Gibson, R.F., “Development of Damping Composite Materials” 1983 Advances in Aerospace Structures, Materials and Dynamics, AD-06, ASME, 89–95 (1983).
Gibson, R.F. and Plunkett, R., “A Forced Vibration Technique for Measurement of Material Damping” experimental mechanics, 11, (8), 297–302 (1977).
Baker, W.E., Woolam, W.E. and Young, D., “Air and Internal Damping of Thin Cantilever Beams” Int. J. Mechanical Engineering Science, 9, 743–766 (1967).
Granick, N. and Stern, J.E., “Material Damping of Aluminum by a Resonant Dwell Technique” NASA TN D2893, (1965).
Suarez, S.A., Gibson, R.F. and Deobald, L.R., “Random and Impulse Techniques for Measurement of Damping in Composite Materials” experimental techniques, 8 (10), 19–24 (1984).
Gibson, R.F., Yau, A. and Riegner, D.A., “Vibration Characteristics of Automotive Composite Materials” Short Fiber Reinforced Composite Materials, ASTM STP 772, ASTM, 133–150 (1982).
Rogers, J.D. and McConnell, K.G., “Damping in Aluminum-Filled Epoxy Using Two Different Flexural Testing Techniques” Int. J. Analytical and Experimental Modal Anal., 8–17 (Oct. 1986).
Lee, J.M. and McConnell, K.G., “Experimental Cross-Verification of Damping in Three Metals,” experimental mechanics, 15 (9), 221–225 (1975).
Timoshenko, S.P., Young, D.H., and Weaver, W., Jr., Vibration Problems in Engineering, John Wiley & Sons, New York, NY (1974).
Huang, T.C. and Huang, C.C., “Free Vibrations of Viscoelastic Timoshenko Beams” J. appl. Mech., 38, Series E (2), 515–521 (1971).
Nakao, T., Okano, T. and Asano, I., “Theoretical and Experimental Analysis of Flexural Vibration of the Viscoelastic Timoshenko Beam” J. appl. Mech., 52 (3), 728–731 (1985).
Dudek, T.J., “Young’s and Shear Moduli of Unidirectional Composites by a Resonant Beam Method” J. Composite Mat., 4, 232–241 (1970).
Kalyanasundaram, S., Allen, D.H. and Schapery, R.A., “Dynamic Response of a Viscoelastic Timoshenko Beam” Proc. 28th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics and Materials Conf, Monterey, CA, Paper No. AIAA-87–0890-CP (April 1987).
Horgan, C.O., “SomeRemarks on Saint- Venant’sPrinciple for Transversely Isotropic Composites” J. Elasticity, 2 (4), 335 (1972).
Choi, I. and Horgan, C.O., “Saint-Venant’s Principle and End Effects in Anisotropic Elasticity” J. Appl. Mech., 44, 424 (1977).
Horgan, C.O., “Saint-Venant End Effects in Composites,”, J. Comp. Mat., 16, 411–422 (1982).
Thomson, W.T., Theory of Vibration with Applications, Prentice-Hall, Englewood Cliffs, NJ (1972).
Meirovitch, L., Elements of Vibration Analysis, McGraw-Hill, New York, NY (1975).
Lazan, B.J., Damping of Materials and Members in Structural Mechanics, Pergamon Press, New York, NY (1968).
Nashif, A.D., Jones, D.I.G., and Henderson, J.P., Vibration Damping, John Wiley & Sons, New York, NY (1985).
Soovere, J. and Drake, M.L., Aerospace Structures Technology Damping Design Guide: Volume I — Technology Review, AFWAL-TR-84–3089 Vol. I, Air Force Wright Aeronautical Labs, Wright-Patterson AFB, OH (1985).
Ward, I.M., Mechanical Properties of Solid Polymers, John Wiley & Sons, New York, NY, 2nd Ed. (1983).
Schultz, A.B. and Tsai, S. W., “Dynamic Moduli and Damping Ratios in Fiber-Reinforced Composites” J. Comp. Mat., 2 (3), 368–379 (1968).
Crawley, E.F. and Mohr, D.G., “Experimental Measurements of Material Damping in Free Fall with Tunable Excitation” ‘AIAA Journal, 23 (1), 125–131 (1985).
Gibson, R.F., “Vibration Damping Characteristics of Graphite/Epoxy Composites for Large Space Structures” Proc. 3rd Large Space Systems Tech. Rev., NASA Conf. Publ. 2215, Part 1, 123–132 (1982).
Ray, A., Kinra, V., Rawal, S. and Misra, M., “Measurement of Damping in Continuous Fiber Metal Matrix Composites” Role of Interfaces on Material Damping, ASM, 95–102 (1985).
Gibson, R.F., Yau, A. and Riegner, D.A., “An Improved Forced Vibration Technique for Measurement of Material Damping” experimental techniques, 6, 10–14 (1982).
Rogers, J.D., Zachary, L. W. and McConnell, K.G., “Damping Characterization of a Filled Epoxy Used for Dynamic Structural Modeling” experimental mechanics, 26 (3), 283–291 (1986).
Rogers, J.D. and McConnell, K.G., “Instrumentation for Determination of Material Damping from Driving Point Measurements” Role of Interfaces on Material Damping, ASM, 103–110 (1985).
Adams, R.D. and Bacon, D.G.C., “The Dynamic Properties of Unidirectional Fibre Reinforced Composites in Flexure and Torsion,” J. Comp. Mat., 7, 53–67 (1973).
Adams, R.D. and Bacon, D.G.C., “Measurement of the Flexural Damping Capacity and Dynamic Young’s Modulus of Metals and Reinforced Plastics,” J. Physics D: Appl. Phys., 6, 27 (1973).
Soovere, J., “Dynamic Response of Flat Integrally Stiffened Graphite/Epoxy Panels Under Combined Acoustic and Shear Loads” Recent Advances in Composites in the U.S. and Japan, ASTM STP 864, ASTM, 281–296 (1985).
Suarez, S.A. and Gibson, R.F., “Improved Impulse-Frequency Response Techniques for Measurement of Dynamic Mechanical Properties of Composite Materials” J. Testing and Eval. 15 (2), 114–121 (1987).
Gibson, R.F., Rao, V.S. and Mantena, P.R., “Vibration Damping Characteristics of Highly Oriented Polyethylene Fiber Reinforced Epoxy Composites,” Advanced Materials Technology ′87, Proc. 32nd Int. SAMPE Symp., 231–244 (1987).
Place, T.A., Gibson, R.F., Mantena, P.R., Perez, N. and Bobeck, G., “The Influence of Thermal Degradation on Internal Damping of a Ni-Mo-Fe-B Rapidly Solidified Alloy” 116th Annual TMS-AIME Mtg., Denver, CO (Feb. 1987).
Mantena, P.R., Place, T.A. and Gibson, R.F., “Characterization of Matrix Cracking in Composite Laminates by the Use of Damping Capacity Measurements,” Role of Interfaces on Material Damping, ASM, 79–94 (1985).
Mantena, P.R., Gibson, R.F., Place, T.A., Srivatsan, T.S. and Sudarshan, T.S., “Debond and Failure Characristics of Double Lap Adhesively Bonded Joint,” Proc. 13th Annual Int. Symp. for Testing and Failure Analysis—ISTFA/87, Los Angeles, CA, ASM Int., 225–233 (Nov. 1987).
Mantena, P.R., Gibson, R.F. and Place, T.A., “Damping Capacity Measurements of Degradation in Advanced Materials,” SAMPE Quarterly, 17 (3), 20–31 (1986).
DeWilde, W.P., Sol, H. and Van Overmeire, M., “Coupling of Lagrange Interpolation, Modal Analysis and Sensitivity Analysis in the Determination of Anisotropic Plate Rigidities,” Proc. 4th Int. Modal Anal. Conf, Los Angeles, CA, 1058–1063 (Feb. 1986).
Deobald, L.R. and Gibson, R.F., “Determination of Elastic Constants of Orthotropic Plates by a Modal Analysis/Rayleigh Ritz Technique, “J. Sound and Vibraton, 124 (2), 269–283 (1988).
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1989 Society for Experimental Mechanics
About this chapter
Cite this chapter
Gibson, R.F. (1989). Vibration-Test Methods for Dynamic-Mechanical-Property Characterization. In: Pendleton, R.L., Tuttle, M.E. (eds) Manual on Experimental Methods for Mechanical Testing of Composites. Springer, Dordrecht. https://doi.org/10.1007/978-94-009-1129-1_20
Download citation
DOI: https://doi.org/10.1007/978-94-009-1129-1_20
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-010-7000-3
Online ISBN: 978-94-009-1129-1
eBook Packages: Springer Book Archive