Abstract
In a previous study (1), an attempt was made to describe the role of plastics as indispensable automotive engineering materials in the light of the demands imposed on modern automobiles. The present paper is intended to show the other side of the coin, i. e. the disposal of plastics parts from abandoned vehicles. The subject has hit the public eye, but often only individual aspects are placed in the forefront. A matter-of-fact contribution to the discussion is therefore essential.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Weber, A.: “Die technischen Gesichtspunkte zur Rolle der Kunststoffe im Automobilbau”, Kunststoffe, March 1990
Müller, H. & E. Haberstroh: “Verwendung von Kunststoff im Automobil und Wiederverwendungsmöglichkeiten”, IKV Aachen; FAT Publication No. 52, Frankfurt/Main 1986
Müller, K & S.S. Klockhow: “Entwicklungstendenzen und Recycling-Problerne bei der Substitution von Stahl im Automobilbau”, Prognos-Institut, Basle 1987
Steiert, H.: “Schon bei der Konstruktion des Automobils muß an die Wiederverwertung seiner Bestandteile gedacht werden”, Blick durch die Wirtschaft, Frankfurt/Main, 13 November, 1989
Menges, G. et al.: “Recycling des Kunststoffanteils von PKW”, Kunststoffe 78 (1988), 7, 573 et seq.
Mast, P. & K. Strobel: “Demontagefreundliche Gestaltung von Automobilen”, FAT Publication, in print
Verband der Automobil industrie (VDA) 260: “Kennzeichnung von Kunststoffteilen”, August 1984
Wutz, M.: “Recycling — ein Kunstruktionsziel im zukünftigen Fahrzeugbau”, 2nd Autec 1988 — Congress, 19 – 21 October 88, Sindelfingen
Emminger, H.: “Verwertung von Kunststoffen aus Hausmüll-Möglichkeiten und Probleme ”, Paper presented at the 4th International Recycling Congress, Berlin 1984, Published as a reprint by the Verband Kunststofferzeugende Industrie (VKE), Frankfurt/Main 1, Karlstr. 21, 11/84
Schönborn, H.-H. et al.: “Wiederverwerten von Kunststoff-Abfällen unter besonderer Berücksichtigung des Hausmülls”, Documentation on studies by Süddeutsches Kunststoff-Zentrum (SKZ), Würzburg; LG-Stiftung (Landes-Giro-Kasse) Natur und Umwelt, Stuttgart 1988
Menges, G. et al.: “Recycling von Kunststoffen in Altautos”; Paper presented at the 1st International Plastics Forum, Salzburg 1985.
Menges, G. et al. Also published under the title, “Fünf Thesen zum Recycling von Kunststoffen aus Altautos”, Kunststoffe 79 (1989) 3, 195 – 198
Hauß, A.F.: “Kunststoffe, Umwelt u. Recycling”, Techn. Rundschau Bern, 35 (1987), 26 – 30 and personal communication to the author
Martin, Johannes J.E. and M. Zahlten: “Betriebs- und Inputvariationsversuche an einer Müllverbrennungsanlage — Ergebnisse und Ausblick -”; EF-Verlag für Energie- und Umwelttechnik GmbH, Berlin. Reprint from Ab-fallwirtschaftsjournal 5/89
VKE: “HCL-Emissionen aus der Müllverbrennung und PVC”, page 29; Published by the Verband Kunststofferzeugende Industrie, Frankfurt/-Main, Karlstr. 21, 1986
FAT: Publication No. 72; Untersuchung über das Emissionsverhalten der Leichtmüllfraktion aus Autoshredderanlagen beim Verbrennen
Dirk, E.: “Thermische Verwendung von Kunststoffen in Haushaltsabfällen”; Frankfurt 1988; The written version of this presentation can be obtained from the Verband Kunststofferzeugende Industrie (VKE), Frankfurt/Main, Karlstr.21
VKE: Annual Report 1988/89; Verband Kunststofferzeugende Industrie (VKE), Frankfurt/Main, Karlstr. 21, 1989
Newspaper “Mannheimer Morgen”, 14 June, 89 Newspaper “Die Rheinpfalz”, 27 June, 89
VKE Publication: “Thermische Verwertung kunststoffreicher Abfallfraktionen”, Frankfurt/Main, July 1989
König, U., Dorn, I. & G. Heinrich: “Zur thermischen Entsorgung von SMC-Abfällen”; Paper presented at the 22nd AVK Meeting in Mainz, May 1989
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1990 Elsevier Science Publishers Ltd
About this chapter
Cite this chapter
Weber, A. (1990). Aspects on Recycling Plastics Engineering Parts. In: Füller, J., Grüninger, G., Schulte, K., Bunsell, A.R., Massiah, A. (eds) Developments in the Science and Technology of Composite Materials. Springer, Dordrecht. https://doi.org/10.1007/978-94-009-0787-4_2
Download citation
DOI: https://doi.org/10.1007/978-94-009-0787-4_2
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-010-6841-3
Online ISBN: 978-94-009-0787-4
eBook Packages: Springer Book Archive