Abstract
It is almost impossible to overestimate the importance of properly designed and manufactured tooling in composites processing. Even in the case of relatively simple, single-sided tools such as are used for autoclave moulding I have seen many instances where inadequate tooling was one of the greatest sources of scrap or reworked components in a production setting. In most variants of RTM the tooling is solely responsible for the geometry and tolerances of the part. The tool dictates how the resin will enter and leave the part and in very large part controls the filling process and thus the quality of the components. The tool must also react all the loads from mould closure and resin pressure and provide the heat required to cure the resin. The longevity and costs of the tooling make a major contribution to production economics. Its weight and ease of handling — with regard to preform loading, clamping, resin porting control and resistance to resin pressure, part ejection and transport — are major factors in the design of the production engineering approaches to be used.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Bergstrom, L. and Alwart, S. (1990) Advantages of mass cast methacrylate tooling for RTM, Proc. Tooling for Composites, June, Anaheim: SME.
Panzer, D. and Harper, A. (1990) Cost effective composite tooling for the RTM process, Resin Transfer Molding for the Aerospace Industry, 6–7 March, Los Angeles: SME.
Smith, P. (1992) New developments in composite tooling, 18th International Composites Congress, British Plastics Federation, Nov., Paper 32.
Ridgard, C. (1988) Distortion in composite prepreg mould tools and components with particular reference to low temperature curing and high precision moulding techniques. In F. Saporiti, W. Merati and L. Peroni (eds), New Generation Materials and Processes, Milan: Grafiche FBM, 87–100.
Peters, D., Bastone, A. and Clark, J. (1990) Aluminium bronze — an alternative tooling material for composites, 45th Annual Conf Composites Institute, SPI, Feb., Session 5-C.
Roark, R. and Young, W. (1976) Formulas for Stress and Strain, 5th edn, McGraw-Hill.
See reference 2 (Panzer and Harper, 1990).
Nelson, R. H. (1988) Prediction of dimensional changes in composite laminates during cure, 34th International SAMPE Symposium, May, 2397–2410.
Designing for Diecasting, London: Fry’s Diecastings Ltd.
Murphy, J. (ed.) (1991) New Horizons in Plastics: A Handbook for Design Engineers, London: WEKA Publishing Group.
See reference 2 (Panzer and Harper, 1990).
Liu, B., Bickerton, S. and Advani, S. (1996) Modelling and simulation of RTM; gate control, venting and dry spot prediction, Composites Part A. 27 A, 135–41.
Larsen, M. (1990) Injection equipment for resin transfer moulding. Resin Transfer Moulding for the Aerospace Industry, 6–7 March, Los Angeles: SME.
3M PR500 epoxy resin datasheet.
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 1997 Kevin Potter
About this chapter
Cite this chapter
Potter, K. (1997). RTM mould tool design. In: Resin Transfer Moulding. Springer, Dordrecht. https://doi.org/10.1007/978-94-009-0021-9_4
Download citation
DOI: https://doi.org/10.1007/978-94-009-0021-9_4
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-010-6497-2
Online ISBN: 978-94-009-0021-9
eBook Packages: Springer Book Archive