Abstract
Screwed connections provide high resistance in strength and stiffness. Arranged to a group the screws interact and influence each other in dependency of their in-between spacings. A test setup was found to investigate (i) the influence of the spacings in-between the screws, and (ii) the anchoring depths on the failure modes and resistances of groups of screws. We conducted tests on axially loaded and under a stress-fiber angle of 90° placed groups of screws in solid timber (ST) and glued laminated timber (GLT) of Norway spruce. Steel fracture, withdrawal failure and also block shear failure mode, till now for self-tapping screws not considered by design codes, were observed. Additionally and based on a simple mechanic load shearing consideration model for the block shear failure mode was developed for the investigated axially loaded groups of screws. Verification with test results confirms congruent but conservative results.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Bejtka, I., Blaß, H.J.: Joints with inclined screws. Paper presented at the 35th CIB-Meeting, Kyoto, Japan (September 2002)
Blaß, H.J., Bejtka, I., Uibel, T.: Tragfähigkeit von Verbindungen mit selbstbohrenden Holzschrauben mit Vollgewinde. In: Band 4 der Reihe Karlsruher Berichte zum Ingenieurholzbau. Universitätsverlag Karlsruhe (2006)
Blaß, H.J., Schmid, M.: Querzugfestigkeit von Vollholz und Brettschichtholz. Report, Universität Karlsruhe (2001)
Blaß, H.J., Uibel, T.: Spaltversagen von Holz in Verbindungen – Ein Rechenmodell für die Rissbildung beim Eindrehen von Holzschrauben. In: Band 12 der Reihe Karlsruher Berichte zum Ingenieurholzbau, Universitätsverlag Karlsruhe (2009)
Ehlbeck, J., Görlacher, R., Werner, H.: Determination of perpendicular-to-grain tensile stresses in joints with dowel-type fasteners. Paper Presented at the 22nd CIB-Meeting, Berlin, German Democratic Republic (September 1989)
EN 1382: 1999-08-01, Timber structures – Test methods – Withdrawal capacity of timber fasteners
EN 1995-1-1: 2009-07-01, Eurocode 5: Design of timber structures – Part 1-1: General – Common rules and rules for buildings
CUAP 06.03/08: 2010-12, Self-tapping screw for use in timber constructions
EN 26891: 1991-02-01, Timber structures – Joints made with mechanical fasteners – General principles for the determination of strength and deformation characteristics (ISO 6891: 1983) (1991)
EN 338: 2009-10-01, Structural timber – Strength classes
FprEN 14080: 2012-02-01, Timber structures – Glued laminated timber and glued solid timber – Requirements
Gatternig, W.: Prüftechnische Ermittlung der Schubfestigkeit von Vollholz und Analyse des Größeneinflusses. Master Thesis, Graz University of Technology (2012)
Gehri, E.: Ductile behaviour and group effect of glued-in steel rods. Report, ETH, Swiss Federal Institute of Technology, Zürich (2001)
Hanhijärvi, A., Kevarinmäki, A., Yli-Koski, R.: Block shear failure at dowelled steeltotimber connections. Paper Presented at the 39th CIB-Meeting, Florence, Italy (August 2006)
Hirschmann, B.: Ein Beitrag zur Bestimmung der Scheibenschubfestigkeit von Brettsperrholz. Master Thesis, Graz University of Technology (2011)
Jöbstl, R., Bogensberger, T., Schickhofer, G.: In-plane shear strength of cross laminated timber. Paper Presented at the 41st CIB-Meeting, St. Andrews, Canada (August 2008)
Kevarinmäki, A.: Joints with inclined screws. Paper Presented at the 35th CIB-Meeting, Kyoto, Japan (September 2002)
Krenn, H., Schickhofer, G.: Joints with inclined screws and steel plates as outer members. Paper Presented at the 42nd CIB-Meeting, Duebendorf, Switzerland (August 2009)
Mahlknecht, U.: Untersuchung von rechtwinklig zur Faser eingebrachten axial beanspruchten Schraubengruppen im Vollholz und Brettsperrholz. Master Thesis, Graz University of Technology (2011)
Mestek P.: Punktgestützte Flächentragwerke aus Brettsperrholz (BSP) – Schubbemessung unter Berücksichtigung von Schubverstärkungen. Doctoral Thesis, Technische Universität München (2011)
Pirnbacher, G., Brandner, R., Schickhofer, G.: Base Parameters of self-tapping Screws. Paper Presented at the 42nd CIB-Meeting, Duebendorf, Switzerland (August 2009)
Plieschounig, S.: Ausziehverhalten axial beanspruchter Schraubengruppen. Master Thesis, Graz University of Technology (2010)
prEN 1194: 2006-06-13, Glued laminated timber – Strength classes and determinations of characteristic values (2006)
Schoenmakers, D.: Fracture and failure mechanisms in timber loaded perpendicular to the grain by mechanical connections. Doctoral Thesis, Eindhoven University of Technology (2010)
Stahl, D.C., Wolfe, R.W., Begel, M.: Improved Analysis of timber rivet connections. Journal of Structural Engineering ASCE 130(8), 1272–1279 (2004)
Stuefer, A.: Einflussparameter auf die Querzugfestigkeit von BSH-Lamellen. Master Thesis, Graz University of Technology (2011)
Wallner, G.: Versuchstechnische Ermittlung der Verschiebungskenngrößen von orthogonal verklebten Brettlamellen. Master Thesis, Graz University of Technology (2004)
Zarnani, P., Quenneville, P.: Predictive analytical model for wood capacity of rivet connections in glulam and LVL. Paper Presented at the 45th CIB-Meeting, Växjö, Sweden (August 2012)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 RILEM
About this paper
Cite this paper
Mahlknecht, U., Brandner, R., Ringhofer, A., Schickhofer, G. (2014). Resistance and Failure Modes of Axially Loaded Groups of Screws. In: Aicher, S., Reinhardt, HW., Garrecht, H. (eds) Materials and Joints in Timber Structures. RILEM Bookseries, vol 9. Springer, Dordrecht. https://doi.org/10.1007/978-94-007-7811-5_27
Download citation
DOI: https://doi.org/10.1007/978-94-007-7811-5_27
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-007-7810-8
Online ISBN: 978-94-007-7811-5
eBook Packages: EngineeringEngineering (R0)