Abstract
An index is introduced, the minimum degree of constraint satisfaction, which quantifies the robustness of the equilibrium of an object with a single scalar. This index is defined under the assumptions that the object is supported by forces of known lines of action and bounded amplitudes, and that the external perturbation forces and moments vary within a known set of possibilities. A method is proposed to compute the minimum degree of constraint satisfaction by resorting to the quick hull algorithm. The method is then applied to two examples chosen for their simplicity and diversity, as evidence of the broad spectrum of applications that can benefit from the index. The first example tackles the issue of fastening a workpiece, and the second, the workspace of a cable-driven parallel robot. From these numerical experiments, the minimum degree of constraint satisfaction proves useful in grasping, cable-driven parallel robots, Gough-Stewart platforms and other applications.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Angeles, J.: The design of isotropic manipulator architectures in the presence of redundancies. The International Journal of Robotics Research 11(3), 196–201 (1992)
Bouchard, S., Gosselin, C., Moore, B.: On the ability of a cable-driven robot to generate a prescribed set of wrenches. ASME Journal of Mechanisms and Robotics 2(1), 011,010 (2010)
Gouttefarde, M., Daney, D., Merlet, J.P.: Interval-analysis-based determination of the wrench-feasible workspace of parallel cable-driven robots. IEEE Transactions on Robotics 27(1), 1–13 (2011)
Khan, W.A., Angeles, J.: The kinetostatic optimization of robotic manipulators: The inverse and the direct problems. ASME Journal of Mechanical Design 128(1), 168–178 (2006)
Merlet, J.P.: Jacobian, manipulability, condition number, and accuracy of parallel robots. ASME Journal of Mechanical Design 128(1), 199–206 (2006)
Park, M.K., Kim, J.W.: Kinematic manipulability of closed chains. In: Advances in Robot Kinematics, pp. 99–108. Portoroz-Bernadin (1996)
Salisbury, J.K., Craig, J.J.: Articulated hands: Force control and kinematic issues. The International Journal of Robotics Research 1(4), 4–17 (1982)
Tandirci, M., Angeles, J., Farzam, R.: Characteristic point and the characteristic length of robotic manipulators. In: ASME Design Engineering Conferences, 22nd Biennial Mechanisms Conference (1992)
Yoshikawa, T.: Analysis and control of robot manipulators with redundancy. In: Proceedings of the First International Symposium on Robotics Research, Bretton Woods, NH, USA, pp. 735–747 (1983)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 Springer Science+Business Media Dordrecht
About this paper
Cite this paper
Guay, F., Cardou, P., Cruz-Ruiz, A.L., Caro, S. (2014). Measuring How Well a Structure Supports Varying External Wrenches. In: Petuya, V., Pinto, C., Lovasz, EC. (eds) New Advances in Mechanisms, Transmissions and Applications. Mechanisms and Machine Science, vol 17. Springer, Dordrecht. https://doi.org/10.1007/978-94-007-7485-8_47
Download citation
DOI: https://doi.org/10.1007/978-94-007-7485-8_47
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-007-7484-1
Online ISBN: 978-94-007-7485-8
eBook Packages: EngineeringEngineering (R0)