Abstract
This paper presents some comparative aspects obtained on an experimental basis, on the determination of noise and vibration level in the operation of a gearbox with worm face-gear with reverse tapered pinion for a pair materials of steel-bronze, steel-gray cast iron and steel-polyamides, oil lubricated T90EP2, with 1:47 transmission ratio. The worm face-gear with reverse tapered is less known and attempts should be carried out to reveal how they conduct the operation and how performance is achieved.In the experiments we used an Archimedes worm with nitrided steel sides finished by fine turning. The conjugate tooth of wheels was obtained by hob-cutter milling. The noise and vibration level measurements were made on a scale of 10 levels in the range 0–115.77 Nm on a bench equipped with electromagnetic powder brake, separate flank the 10° and then 30° for each couple of material. Gearbox which has the gear structure is made of cast iron casing.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Abbreviations
- A:
-
Axial distance
- i:
-
Transmission ratio
- m:
-
Module
- α1 :
-
Bearing flank
- α2 :
-
Support flank
- δ1 :
-
Tapered worm
- δ2 :
-
Tapered worm wheel
- Ra:
-
Roughness
- E:
-
Modulus of elasticity
- σr :
-
Normal stress
- HB:
-
Brinell Hardness.
References
Abadjiev V (2009) Synthesis design and manufacture of high reduction hyperboloid gears: brief review of researches institute of mechanics—BAS, international conference general machine design, 15–16 Oct 2009, University of Ruse, pp 25–29
Bodzas S, Dudas I (2010) Modern quality assurance of spiroid worm. In: Proceeding of factory automation 2010 15–16 April 2010 Kecskemet, Hungary, pp 139–144
Boloş, V, Boloş C, Bucur B (2005). Gearbox with reversed tapered spiroid gearsets, interdisciplinarity in engineering. In: Proceedings of the scientific conference with international participation “inter-Ing 2005”, ISBN 973-8084-81-4, Tg Mures, 6–7 Nov 2005, vol I. Petru Maior University of Tg-Mureş, Romania, pp 59–66
Bucur B, Boloş V (2011a) Experimental study of the thermal limit for the gearbox worm face-gear with reverse tapered pinion. In: Gyenge CS (ed) Proceeding of the 9th international conference MTeM 2011, Technical University, ISBN 978-606-8372-02-0, Cluj-Napoca, Oct 2011, Cluj-Napoca, Romania, pp 53–56
Bucur B, Boloş V (2011b). Experimental research on noise and vibration level of gearbox using worm face-gear with reverse tapered pinion, Scientific Bulloetin of the Petru Maior University of Tirgu-Mures, vol 8 (XXV) no.2, 2011, Romania, pp 147–150
Georgiev AK (1966) Ortogonal worm-bevel gearing. Brevet SUA, nr. 3289489
Gost XXX 22850-77 Peredach spiroideniie-Termini, Opredelenia i Oboznachenia
Kuznetzov AS, Treteakova MS, Domnin NN (2007) Issledovanie staticheskoi prochnosti zatzepleaiuschihsia spiroidnoi o peredach reductora ZRA. Vestnik Ijevskovo gosudartsveno tehnichskovo universiteta 33(1):135–138
Mehanik Nauchno-proivodstvenoe Predpriatie, Katalog productzii, Privodi truboprovodnoi armaturi. www.mechanik.udmnet.ru 2009
Mudrik J, Rieciciarova E (2008) Load application of the spiroid gears using dynamic dynanomater, ADEKO, Faculty of technical science Novi Sad, 18 May 2008, 48th anniversary of the faculty, pp 83–86
Popova EI (2007) Nagruzochnaia sposobnosti peredach s metalloplastmassovimi kolesami, Vestnik Ijevskovo gosudartsveno tehnichskovo universiteta, vol 33, No.1, 2007, pp 154–156
Popova EI, Goldfarb VI (2006) Investigation of spiroid gears with plastic gearwheels. J Mech Eng Des 9(1):38–43
Rieciciarova E (2007) Contribution to influence loading of efficiency and operation temperature of spiroid gears, J Eng Ann Faculty Eng Hunedoara, Tome V (year 2007), fascicole 2, pp 185–188
Rieciciarova E, Duris E (2010) Dynamic measurement over-all efficiency of spiroid gears, 7th international DAAAM Baltic conference “industrial engineering” 22–24 April 2010. Tallin, Estonia
Trubachev ES, Kuniver AS (2007) Ispitania malogabaritnih spiroidnih reductorov. Vestnik Ijevskovo gosudartsveno tehnichskovo universiteta 33(1):175–179
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer Science+Business Media Dordrecht
About this paper
Cite this paper
Bucur, B., Boloş, V. (2013). Comparative Experimental Study on Noise and Vibration Level of Gearbox with Worm Face-Gear with Reverse Tapered Pinion. In: Dobre, G. (eds) Power Transmissions. Mechanisms and Machine Science, vol 13. Springer, Dordrecht. https://doi.org/10.1007/978-94-007-6558-0_16
Download citation
DOI: https://doi.org/10.1007/978-94-007-6558-0_16
Published:
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-007-6557-3
Online ISBN: 978-94-007-6558-0
eBook Packages: EngineeringEngineering (R0)