Advertisement

ANC-System Design Methodology

  • Thomas KletschkowskiEmail author
Part of the Intelligent Systems, Control and Automation: Science and Engineering book series (ISCA, volume 56)

Abstract

Because an ANC-system consists of a basic system (the air filled enclosure) with integrated sensors such as microphones and actuators such as loudspeakers that are driven by a controller, it is obvious that the development will result in a system with a high level of complexity. For this reason the development cannot take place separately in the domains involved. In fact, a successful development process requires a guideline for cross-domain communication and cooperation between mechanical engineering, electrical engineering and information technology to obtain a common conception of the future ANC-system that is optimized overall. For these reasons the upcoming chapter presents a design methodology for ANC-systems. This methodology is derived from the more general design methodology for mechatronic systems (VDI 2206) that has been converted and concretized in order to provide a guideline for ANC-system design. It is based on five overlapping design steps. Every design step requires the handling of specific design tasks. Successful processing of these design tasks enables successful completion of design steps. This is expressed by an increase of system maturity. The latter is assessed using a number of nine different maturity levels. This chapter is focused on theoretical aspects. The application of the proposed design methodology to specific interior noise problems using the ANC-system design tools that have been discussed in the previous chapter is shown in the next part of this book.

Keywords

Operational Environment Design Task Maturity Level Design Step Successful Demonstration 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

References

  1. Breitbach H, Sachau D (2009) Active acoustic solutions for a high speed turboprop transport aircraft. In: Proc of ACTIVE 2009, Ottawa, Canada, August 20–22 Google Scholar
  2. Breitbach H, Storm U, Stothers I (2009) Development of active noise reduction systems for a high speed turboprop transport aircraft. In: Proc of AC—adaptronic congress, Berlin, Germany, May 19–20 Google Scholar
  3. Danzer WF, Huber F (1994) System Engineering—Methoden und Praxis. Verlag Industrieelle Organisation, Zürich Google Scholar
  4. DIN EN 60268-4 (2004) Elektroakustische Geräte. Teil 4: Mikrofone (IEC 602684:2004); Deutsche Fassung EN 60268-4:2004. DIN Deutsches Institut für Normung e.V., Germany Google Scholar
  5. DIN EN 60268-5 (2004) Elektroakustische Geräte. Teil 5: Lautsprecher (IEC 60268-5:2003); Deutsche Fassung EN 60268-5:2003. DIN Deutsches Institut für Normung e.V., Germany Google Scholar
  6. Emborg U (1998) Cabin noise control in the Saab 2000 high-speed turboprop aircraft. In: Proc of ISMA 1998, int conference on noise and vibration engineering, Sept 16–18. Katholieke Universiteit Leuven, Belgium Google Scholar
  7. Halvorsen WG, Emborg U (1989) Interior noise control of the Saab 340. SAE Technical Paper Series, 891080 Google Scholar
  8. Mankins JC (1995) Technology readiness levels: a white paper. Control engineering practice. NASA, Office of Space Access and Technology, Advanced Concepts Office Google Scholar
  9. NASA (2007) System engineering handbook. NASA/SP-2007-6105 Rev 1. http://ntrs.nasa.gov. Cited 22 June 2010
  10. Sage AP (1992) System engineering. Wiley, New York Google Scholar
  11. VDI 2206 (2004) Entwicklungsmethodik für mechatronische Systeme (Design methodology for mechatronic systems). Verein Deutscher Ingenieure, Düsseldorf Google Scholar

Copyright information

© Springer Science+Business Media B.V. 2012

Authors and Affiliations

  1. 1.Department of Mechanical Engineering, MechatronicsHelmut-Schmidt-University/University of the Federal Armed Forces HamburgHamburgGermany

Personalised recommendations