Abstract
The TRISO fuel has been used in some of the Generation IV nuclear reactor designs [1]. It consists of a fuel kernel of UOx coated with several layers of materials with different functions. Pyrolytic carbon (PyC) is one of the materials in the layers. In this study we investigate the possibility of using Glassy Polymeric Carbon (GPC) as an alternative to PyC. In this work, we are comparing the changes in physical and microstructure properties of GPC after exposure to irradiation fluence of 5 MeV Au equivalent to a 1 displacement per atom (dpa) for GPC prepared at 2,000°C. The GPC material is manufactured and tested at the Center for Irradiation Materials (CIM) at Alabama A&M University using Transmission electron microscopy (TEM) and stopping range of ions in matter (SRIM) software.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Association of German Engineers (1990) AVR - Experimental high-temperature reactor: 21 years of successful operation for a future energy technology (pp. 9–23). Available from http://www.nea.fr/abs/html/nea-1739.html
Fukuda K, Ogawa T, Hayashi K, Shiozawa S, Tsuruta H, Tanaka I, Suzuki N, Yoshimuta S, Kaneko M (1991) Research and development of HTTR coated particle fuel. J Nucl Sci Technol 28:570
Next Generation Nuclear Plant (2009) Retrieved from www.nextgenerationnuclearplant.com/i/triso.gif
Olander D (2009) Nuclear fuels - Present and future. J Nucl Mater 389(1):1–22
McCullough CR (1947, September15) Summary report on design and development of high temperature gas-cooled power pile (DOE Contract No. W-35-058-ENG-71). Oak Ridge National Laboratory, Oak Ridge. doi: 10.2172/4359623
Petti DA, Buongiorno J, Maki JT, Hobbins RR, Miller GK (2003) Key differences in the fabrication, irradiation and high temperature accident testing of US and German TRISO-coated particle fuel, and their implications on fuel performance. Nucl Eng Des 222(2–3):281–297
Fisher J (1996) Active crucible bridgman system: crucible characterization, rf inductor design and model. Dissertation, Alabama A&M University
Maleki H, Holland LR, Jenkins GM, Zimmerman L, Porter W (1996) Maximum heating rates for producing undistorted glassy carbon were determined by wedge-shaped samples. J Mater Res 11(9):2368–2375
Abunaemeh M, Seif M, Yang Y, Wang L, Chen Y, Ojo I, Muntele C, ILA D (2010) Characterization of changes in properties and microstructure of glassy polymeric carbon following Au ion irradiation. Materials Research Society Proceeding, 1215. doi:10.1557/PROC-1215-V16-26
Acknowledgments
This research was supported and funded by the AAMRI Center for Irradiation of Material, NSF Alabama GRSP EPSCOR, and DoE NERI-C project number DE-FG07-07ID14894. Acknowledgment also goes for Dr. Edwards, the Dean of the school of Arts and Sciences at Alabama A&M University for the travel support.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2012 Springer Science+Business Media B.V.
About this paper
Cite this paper
Abunaemeh, M. et al. (2012). Characterization of Au Irradiated Glassy Polymeric Carbon at 2,000°C for Nuclear Applications. In: Vaseashta, A., Braman, E., Susmann, P. (eds) Technological Innovations in Sensing and Detection of Chemical, Biological, Radiological, Nuclear Threats and Ecological Terrorism. NATO Science for Peace and Security Series A: Chemistry and Biology. Springer, Dordrecht. https://doi.org/10.1007/978-94-007-2488-4_41
Download citation
DOI: https://doi.org/10.1007/978-94-007-2488-4_41
Published:
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-007-2487-7
Online ISBN: 978-94-007-2488-4
eBook Packages: Biomedical and Life SciencesBiomedical and Life Sciences (R0)