Abstract
The qualification of large testing facilities serving in earthquake engineering research and the management of the instrumentation are the central issues of this paper. The main aspects of instrumentation management and seismic test methods are presented, commented upon and critically assessed based on both the answers to a questionnaire and the outcomes of the SERIES Workshop about the Qualification of Facilities held in Ohrid, MK. On the basis of the results presented herein and the proposals and comments formulated at the Ohrid workshop, a roadmap for the qualification of earthquake research laboratories will be drawn up.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
ANSI/AISC 341-05 (2005) Seismic provisions for structural steel buildings, AISC, Chicago, Ill
ANSI/IEEE C37.98-1987 (1987) IEEE Standard Seismic Testing of Relays
ES 2126-02a (2003) Standard test method for cyclic (reversed) load test for shear resistance of walls for buildings. ASTM West Conshohocken, Pennsylvania
ATC-24 (1992) Guidelines for cyclic seismic testing components of steel structures for buildings. Report no. ATC-24, Applied Technology Council, Redwood City
ECCS (1996) Recommended testing procedure for assessing the behavior of structural steel elements under cyclic Loads, ECCS, N°45
EN 60255-21-3 (1996) Electrical relays – Part 21: vibration, shock, bump and seismic tests on measuring relays and protection equipment-Section 3: Seismic tests
EN 61587-2 (2001) Mechanical structures for electronic equipment – Tests for IEC 60917 and IEC 60297 – Part 2: seismic tests for cabinets and racks
FEMA 461 (2007) Interim Testing Protocols for Determining Seismic Performance Characteristics of Structural and Nonstructural Components Through Laboratory Testing, Federal Emergency Management Agency, Washington, DC
ICC-ES AC156 (2010) Seismic qualification by shake-table testing of nonstructural components and systems, ICC Evaluation Service, Approved Criteria, Falls church, VA
IEC 60980 (1989) Recommended practices for seismic qualification of electrical equipment of the safety system for nuclear generating stations
IEC/TR 62271-300 (2006) High-voltage switchgear and control gear – Part 300: seismic qualification of alternating current circuit-breakers
IEC/TS 61463 (2000) Bushings –seismic qualification. International Electrotechnical Commission, Geneva
IEC1166 (1993), First Edition, High-voltage alternating current circuit-breakers – Guide for seismic qualification of high-voltage alternating current circuit-breakers. International Electrotechnical Commission, Geneva
IEEE/ANSI Standard 344 (2005) IEEE Recommended Practice for Seismic qualification of class 1E equipment for nuclear power generating stations
ISO 2762-2 (2010) Elastomeric seismic protection isolators – Part 2: applications for bridges – specifications. ISO, Geneva
ISO 22762-1 (2010) Elastomeric seismic protection isolators – Part 1: test methods. ISO, Geneva
ISO 22762-3 (2010) Elastomeric seismic protection isolators – Part 3: applications for buildings – specifications, ISO, Geneva
ISO/IEC 17025 (2005) General requirements for the competence of testing and calibration laboratories. ISO, Geneva
ISO/TC 165 WD 16670 (1998) Timber structures – joints made with mechanical fasteners – quasi static reversed-cyclic test method. Standards Council of Canada
UNI CEI ENV 13005 (2000) Guide to the expression of uncertainty in measurement, UNI – CEI Metrologia Generale, Italy
Zola M, Taylor C (2012) Evaluation and impact of qualification of experimental facilities in Europe. In: Fardis MN, Radikevic Z (eds) Proceedings of SERIES workshop: role of research infrastructures in performance-based earthquake engineering. Springer, Dordrecht
Acknowledgements
The research leading to these results has received funding from the European Community’s Seventh Framework Programme [FP7/2007-2013] under grant agreement n° 227887 for the SERIES project.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2012 Springer Science+Business Media B.V.
About this paper
Cite this paper
Kurç, Ö., Sucuoğlu, H., Molinari, M., Zanon, G. (2012). Qualification of Large Testing Facilities in Earthquake Engineering Research. In: Fardis, M., Rakicevic, Z. (eds) Role of Seismic Testing Facilities in Performance-Based Earthquake Engineering. Geotechnical, Geological, and Earthquake Engineering, vol 22. Springer, Dordrecht. https://doi.org/10.1007/978-94-007-1977-4_15
Download citation
DOI: https://doi.org/10.1007/978-94-007-1977-4_15
Published:
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-007-1976-7
Online ISBN: 978-94-007-1977-4
eBook Packages: Earth and Environmental ScienceEarth and Environmental Science (R0)