Abstract
Wind energy has been focused as an inexhaustible and abundant energy source for electrical power generation and its penetration level has increased dramatically worldwide in recent years. However, its intermittence nature is still a universally faced challenge. As a possible solution, energy storage technology hybrid with renewable power generation process is considered as one of options in recent years. The paper aims to study and compare two feasible energy storage means—compressed air (CAES) and electrochemical energy storage (ECES) for wind power generation applications. A novel CAES structure in hybrid connection with a small power scale wind turbine is proposed. The mathematical model for the hybrid wind turbine system is developed and the simulation study of system dynamics is given. Also, a pneumatic power compensation control strategy is reported to achieve acceptable power output quality and smooth mechanical connection transition.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Sinden G (2005) Wind power and UK wind resource. Environmental change institute, University of Oxford
Akhmatov V (2002) Variable-speed wind turbines with doubly-fed induction generators. Part II: power system stability. Wind Eng 26(3):71–88
Hansena AD, Michalke G (2007) Fault ride-through capability of DFIG wind turbines. Renew Energy 32:1594–1610
Cavallo A (2007) Controllable and affordable utility-scale electricity from intermittent wind resources and compressed air energy storage (CAES). Energy 32:120–127
Lemofouet S, Rufer A (2006) A hybrid energy storage system based on compressed air and supercapacitors with maximum efficiency point tracking (MEPT). IEEE Trans Ind Electron 53(4):1105–1115
Van der Linden S (2006) Bulk energy storage potential in the USA, current developments and future prospects. Energy 31:3446–3457
Wang J, Pu J, Moore P (1999) Accurate position control of servo pneumatic actuator systems: an application to food packaging. Control Eng Pract 7(6):699–706
Yang L, Wang J, Lu N et al (2007) Energy efficiency analysis of a scroll-type air motor based on a simplified mathematical model. In: The Proceedings of the World Congress on Engineering. London, pp 759–764, 2–4 July 2007
Wang J, Yang L, Luo X, Mangan S, Derby JW (2010) Mathematical modelling study of scroll air motors and energy efficiency analysis—Part I. IEEE-ASME Transactions on Mechatronics. doi:10.1109/TMECH.2009.2036608
Wang J, Luo X, Yang L, Shpanin L, Jia N, Mangan S, Derby JW (2010) Mathematical modelling study of scroll air motors and energy efficiency analysis—Part II. IEEE-ASME Transactions on Mechatronics. doi:10.1109/TMECH.2009.2036607
Price A (2009) The current status of electrical energy storage systems. ESA London Meeting, London, UK
Vongmanee V (2009) The renewable energy applications for uninterruptible power supply based on compressed air energy storage system. In: IEEE Symposium on Industrial Electronics and Applications (ISIEA 2009). Kuala Lumpur, Malaysia, 4–6 October 2009
Heier S (1998) Grid integration of wind energy conversion systems. Wiley, Chicheste
Sun H, Wang J, Guo S, Luo X (2010) Study on energy storage hybrid wind power generation systems. In: The Proceedings of the World Congress on Engineering 2010 WCE 2010, Vol II, London, UK, June 30–July 2, pp 833–838
Pillay P, Krishnan R (1989) Modeling, simulation and analysis of permanent magnet motor drives, part 1: the permanent-magnet synchronous motor drive. IEEE Trans Ind Appl 25:265–273
Luo X, Wang J, Shpanin L, Jia N, Liu G, Zinober A (2008) Development of a mathematical model for vane-type air motors with arbitrary N vanes. In: International Conference of Applied and Engineering Mathematics, WCE, vol I–II. London, pp 362–367, July 2008
Wang J, Pu J, Moore PR, Zhang Z (1998) Modelling study and servo-control of air motor systems. Int J Control 71(3):459–476
Yeung YPB, Cheng KWE, Chan WW, Lam CY, Choi WF, Ng TW (2009) Automobile hybrid air conditioning technology. In: The Proceedings of the 3rd International Conference on Power Electronics Systems and Applications, p 116
Wei JL, Wang J, Wu QH (2007) Development of a multi-segment coal mill model using an evolutionary computation technique. IEEE Trans Energy Convers 22:718–727
Zhang YG, Wu QH, Wang J, Oluwanda G, Matts D, Zhou XX (2002) Coal mill modelling by machine learning based on on-site measurement. IEEE Trans Energy Convers 17(4):549–555
Wang J, Kotta U, Ke J (2007) Tracking control of nonlinear pneumatic actuator systems using static state feedback linearization of the input-output map. In: Proceedings of the Estonian Academy of Sciences-Physics Mathematics, vol 56, pp 47–66
Acknowledgments
The authors would like to thank the support from ERDA/AWM for the support of Birmingham Science City Energy Efficiency & Demand Reduction project, China 863 Project (2009AA05Z212) and the scholarships for Hao Sun, Xing Luo from the University of Birmingham, UK.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2011 Springer Science+Business Media B.V.
About this chapter
Cite this chapter
Sun, H., Wang, J., Guo, S., Luo, X. (2011). Study on a Wind Turbine in Hybrid Connection with a Energy Storage System. In: Ao, SI., Gelman, L. (eds) Electrical Engineering and Applied Computing. Lecture Notes in Electrical Engineering, vol 90. Springer, Dordrecht. https://doi.org/10.1007/978-94-007-1192-1_4
Download citation
DOI: https://doi.org/10.1007/978-94-007-1192-1_4
Published:
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-007-1191-4
Online ISBN: 978-94-007-1192-1
eBook Packages: EngineeringEngineering (R0)