Abstract
For the determination of the mechanical properties of endless-fibre reinforced ceramic composites the properties of both, the components and the composite, should be characterized.
For that reason firstly the fibre-bundle tension test according to the European prestandard ENV 1007–5 is introduced. The test is applied to the carbon fibres Tenax HTA7 and Toray T800HB and with the results the problems arising with this testing method are discussed.
Secondly an equipment is presented (EMOTRON 2000), which enables to determine the elastic moduli of anisotropic composites in dependence on the orientation. The testing procedure is applied to a laminated carbon-fibre reinforced carbon composite and by means of the results the problems with the method and the evaluation procedure are discussed.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsPreview
Unable to display preview. Download preview PDF.
References
Domnanovich, A., Peterlik, H. and Kromp, K. (1996) Determination of interface parameters for carbon/carbon composites by the fibre-bundle pull-out test, Comp. Sci. Technol. 56, 1017–1029.
Chi, Z., Chou, T.-W. and Shen, G. (1984) Determination of single fibre strength distribution from fibre bundle testings, J. Mater. Sci 19, 3319–3324.
Helmer, T., Wanner, A. and Kromp, K. (1990) Prüfmethoden für faser-verstärkte Keramiken, Bauteil ‘90: Prüfen neuer Werkstoffe, Prüfmethoden-Anwendung -und Aussagefähigkeit, Deutscher Verband für Materialforschung und-prüfung (DVM), Berlin, 297–312.
Helmer, T., Wanner, A. and Kromp, K. (1990) Zugversuche an Faserbündeln und deren statistische Auswertung, Fortschrittsberichte der Deutschen Keram. Ges. 5, 219–240.
Lissait, N. (1994) Probabilité de rupture et fiabilité des composites à matrice céramique, thesis, University of Bordeaux.
Loidl, D. (1997) Einfluß einer Hochtemperaturbehandlung auf die mechanischen Eigenschaften von Kohlenstoffasern, thesis, University of Vienna.
European Committee for Standardization (1997) Determination of distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at ambient temperature, ENV 1007–5, agreed for publication by CEN TC184 SCI, June 27th 1997 in Vienna.
Johnson, D.J. (1980) Recent advances in studies of carbon fibre structure, Phil Trans. R. Soc. Lond. A 294, 443–449.
Bennett, S.C., Johnson, D. J. and Johnson, W. (1983) Strength-structure relationships in PAN-based carbon fibres, J. Mater. Sci. 18, 3337–3347.
Goens, E. (1931) Über die Bestimmung des Elastizitätsmoduls von Stäben mit Hilfe von Biegeschwingungen, Analen der Physik, 5, 649–678.
Förster, F. (1937) Ein neues Verfahren zur Bestimmung des Elastizitätsmoduls und der Dämpfung, Z. Metallkunde, 29, 109–115.
Spinner, S., Tefft, W. E. (1961) A method for determining mechanical resonance frequencies and for calculating elastic moduli from these frequencies, Proc. ASTM, 61, 1221–1238.
Huang, T. C. (1961) The effect of rotary inertia and shear deformation on the frequency and normal mode equations of uniform bars with simple end condition, J. Appl. Mech., 28, 579–584.
Wanner, A., Kromp, K. (1988) Young’s and shear moduli of laminated carbon/carbon composites by resonant beam method. “Brittle Matrix Composites 2” ed. by A. M. Brandt and I. H. Marshall, Elsevier Appl. Sci. Publ., London-New York 280–289.
Wanner, A., Kromp, K. (1988) Bestimmung der elastischen Eigenschaften von Silizium-infiltriertem Siliziumkarbid im Temperaturbereich von 20–1400°C, Fortschrittsberichte d. Deutschen Keram. Ges., 3, 3, 43–58
Wanner, A. (1995) Max-Planck-Institut für Metallforschung, Stuttgart; personal comm. to be published.
Gere, J. M., Timoshenko, S. P. (1984) Shear Deflection in beams, Mechanics of Materials, 2nd Edition, PWS-KENT Publ. Comp., Boston, Chapter 12.9, pp 660–666.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1998 Kluwer Academic Publishers
About this chapter
Cite this chapter
Lins, W., Loidl, D., Kromp, K. (1998). Problems of the Determination of the Mechanical Properties of Endless-Fibre Reinforced Ceramic Composites. In: Haddad, Y.M. (eds) Advanced Multilayered and Fibre-Reinforced Composites. NATO ASI Series, vol 43. Springer, Dordrecht. https://doi.org/10.1007/978-94-007-0868-6_15
Download citation
DOI: https://doi.org/10.1007/978-94-007-0868-6_15
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-015-3940-1
Online ISBN: 978-94-007-0868-6
eBook Packages: Springer Book Archive