Abstract
A multi-crack identification algorithm has been developed based on the forced response from a shaft. Transverse vibrations of a cracked shaft in the two orthogonal planes are analyzed. The presence of cracks in a shaft introduces a local slope discontinuity in the elastic line of the shaft. This slope discontinuity is estimated by approximating the forced response of shaft at consecutive measurement axial locations by a polynomial. The algorithm is tested for numerically simulated responses from the FE modeling of a simply supported shaft having two cracks.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Dimarogonas, A.D.: Vibration of cracked structures: a state of the art review. Eng. Fract. Mech. 55, 831–857 (1996)
Dimarogonas, A.D., Paipetis, S.A.: Analytical Methods in Rotor Dynamics. Elsevier Applied Science, London (1983)
Karthikeyan, M., Tiwari, R., Talukdar, S.: Development of a novel algorithm for a crack detection, localization, and sizing in a beam based on forced response measurements. Trans. ASME, J. Vib. Acoust. 130, 021002-(1–14) (2008)
Darpe, A.K.: A novel way to detect transverse surface crack in a rotating shaft. J. Sound Vib. 305, 151–171 (2007)
Sekhar, A.S.: Multiple cracks effects and identification. Mech. Syst. Signal Process. 22, 845–878 (2008)
Chasalevris, A.C., Papadopoulos, C.A.: Coupled horizontal and vertical bending vibrations of a stationary shaft with two cracks. J. Sound Vib. 309, 507–528 (2008)
Quek, S., Wang, Q., Zhang, L., Ang, K.: Sensitivity analysis of crack detection in beams by wavelet techniques. Int. J. Mech. Sci. 43, 2899–2910 (2001)
Chasalevris, A.C., Papadopoulos, C.A.: Identification of multiple cracks in beams under bending. Mech. Syst. Signal Process. 20, 1631–1673 (2006)
Papadopoulos, C.A., Dimarogonas, A.D.: Coupled longitudinal and bending vibration of rotating shaft with an open crack. J. Sound Vib. 117, 81–93 (1987)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2011 Springer Science+Business Media B.V.
About this paper
Cite this paper
Singh, S.K., Tiwari, R., Talukdar, S. (2011). A Multi-Crack Identification Algorithm Based on Forced Vibrations from a Shaft System. In: Gupta, K. (eds) IUTAM Symposium on Emerging Trends in Rotor Dynamics. IUTAM Bookseries, vol 1011. Springer, Dordrecht. https://doi.org/10.1007/978-94-007-0020-8_42
Download citation
DOI: https://doi.org/10.1007/978-94-007-0020-8_42
Published:
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-007-0019-2
Online ISBN: 978-94-007-0020-8
eBook Packages: EngineeringEngineering (R0)