Abstract
Due to their physical operating principle, resistive gas sensors demand for very widerange interface circuits. As a consequence, the design of read–out devices, with particular emphasis on integrated circuit solutions, has to face off several limitations, like noise contribution and limited voltage supply. The combination of these constrains would lead, in a traditional linear design approach with digital output, to the exploitation of conditioning network circuits and A/D converters with unreliable specifications. This situation is described in the following to define the fundamental limitations. Moreover a design optimization technique for a state–of–the art solution is reported.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
C. L. Dai, M. C. Liu, “Nanoparticle SnO2 gas sensor with circuit and micro heater on chip fabricated using CMOS-MEMS technique”, Proceedings of Nano-Micro Engineered and Molecular Systems Conference, pp. 959–963, IEEE, 2007.
S. Capone, P. Siciliano, “Gas sensors from nanostructered metal oxides”, Encyclopedia of Nanoscience and Nanotechnology, vol. 3, pp. 769–804, American Scientific Publishers, 2004.
G. Sberveglieri, “Recent developments in semiconducting thin-film gas sensors”, Sensors and Actuators B, Chemical, vol. 23, pp. 103–109, Elsevier, 1995.
A. Lombardi, L. Bruno, M. Grassi, P. Malcovati, S. Capone, L. Francioso, P. Siciliano, A. Baschirotto, “Integrated read-out and temperature control interface with digital I/O for a gas‑sensing system based on a SnO2 microhotplate thin film gas sensor”, Proceedings of International Conference on Sensors, pp. 596–599, IEEE, 2008.
M. Grassi, P. Malcovati, A. Baschirotto, “A 160dB equivalent dynamic range auto-scaling interface for resistive gas sensors arrays”, Journal of Solid-State Circuits, vol. 42, pp. 518–528, IEEE, 2007.
A. Baschirotto, S. Capone, A. D’Amico, C. Di Natale, V. Ferragina, G. Ferri, L. Francioso, M. Grassi, N. Guerrini, P. Malcovati, E. Martinelli, P. Siciliano, “A portable integrated wide-range gas sensing system with smart A/D front-end”, Sensors and Actuators B, vol. 130, pp. 164–174, Elsevier, 2008.
M. Grassi, P. Malcovati, A. Baschirotto, “A 141dB dynamic range CMOS gas-sensor interface circuit without calibration with 16-bit digital output word”, Journal of Solid-State Circuits, vol. 42, pp. 1543–1554, IEEE, 2007.
A. Burresi, A. Fort, S. Rocchi, M. B. Serrano Santos, N. Ulivieri, V. Vignoli, “Temperature profile investigation of SnO2 sensors for CO detection enhancement”, Transactions on Instrumentation and Measurement, vol. 54, pp. 79–86, IEEE, 2005.
D. Barrettino, M. Graf, S. Hafizovic, S. Taschini, C. Hagleitner, A. Hierlemann, H. Baltes, “A single-chip CMOS micro-hotplate array for hazardous-gas detection and material characterization”, Proceedings of International Solid State Circuits Conference, pp. 312–313, IEEE, 2004.
F. Maloberti, “Data Converters”, Springer, 2007.
A. Baschirotto, P. Malcovati, “Technology-driven alternatives for smart sensor interfaces”, in H. Baltes, G. Fedder, J. Korvink, ed., “Sensors Update”, vol. 13, pp. 45–81, Wiley-VCH, Weinhein, 2003.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2010 Springer Science+Business Media B.V.
About this paper
Cite this paper
Grassi, M., Malcovati, P., Baschirotto, A. (2010). Fundamental Limitations in Resistive Wide-Range Gas-Sensor Interface Circuits Design. In: Malcovati, P., Baschirotto, A., d'Amico, A., Natale, C. (eds) Sensors and Microsystems. Lecture Notes in Electrical Engineering, vol 54. Springer, Dordrecht. https://doi.org/10.1007/978-90-481-3606-3_3
Download citation
DOI: https://doi.org/10.1007/978-90-481-3606-3_3
Published:
Publisher Name: Springer, Dordrecht
Print ISBN: 978-90-481-3605-6
Online ISBN: 978-90-481-3606-3
eBook Packages: EngineeringEngineering (R0)