Summary
We present a novel mathematical model to study the mechanical properties of endovascular stents in their expanded state. The model is based on the theory of slender curved rods. Stent struts are modeled as linearly elastic curved rods that satisfy the kinematic and dynamic contact conditions at the vertices where the struts meet. A weak formulation for the stent problem is defined and a Finite Element Method for a numerical computation of its solution is used to study mechanical properties of two commonly used coronary stents (Palmaz-like and Xience-like stent) in their expanded, fractured state. A simple fracture (separation), corresponding to one stent strut being disconnected from one vertex in a stent, was considered. Our results show a drastic difference in the response of the two stents to the physiologically reasonable uniform compression and bending forces.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
J. L. Berry, A. Santamarina, J. E. Moore, Jr., S. Roychowdhury, and W. D. Routh. Experimental and computational flow evaluation of coronary stents. Ann. Biomed. Eng., 28(4):386–398, 2000.
S. Canic, C. J. Hartley, D. Rosenstrauch, J. Tambaca, G. Guidoboni, and A. Mikelic. Blood flow in compliant arteries: An effective viscoelastic reduced model, numerics and experimental validation. Ann. Biomed. Eng., 34(4):575–592, 2006.
A. Carter. Stent strut fracture: Seeing is believing. Catheter. Cardiovasc. Interv., 71(5):619–620, 2008.
P. G. Ciarlet. Mathematical Elasticity. Volume I: Three-Dimensional Elasticity. North-Holland, Amsterdam, 1988.
C. Dumoulin and B. Cochelin. Mechanical behavior modeling of balloon-expandable stents. J. Biomech., 33(11):1461–1470, 2000.
A. O. Frank, P. W. Walsh, and J. E. Moore, Jr. Computational fluid dynamics and stent design. Artificial Organs, 26(7):614–621, 2002.
Y. C. Fung. Biomechanics: Mechanical properties of living tissues. Springer, second edition, 1993.
G. Hausdorf. Mechanical and biophysical aspects of stents. In P. Syamasundar Rao and Morton J. Kern, editors, Catheter Based Devices for the Treatment of Non-coronary Cardiovascular Diseases in Adults and Children, Philadelphia, PA, 2003. Lippincott Williams & Wilkins.
V. Hoang. Stent design and engineered coating over flow removal tool. Team #3 (Vimage), 10/29/04.
M. Jurak and J. Tambača. Derivation and justification of a curved rod model. Math. Models Methods Appl. Sci., 9(7):991–1014, 1999.
M. Jurak and J. Tambača. Linear curved rod model. General curve. Math. Models Methods Appl. Sci., 11(7):1237–1252, 2001.
K. W. Lau, A. Johan, U. Sigwart, and J. S. Hung. A stent is not just a stent: stent construction and design do matter in its clinical performance. Singapore Med. J., 45(7):305–311, 2004.
A. N. Makaryus, L. Lefkowitz, and A. D. K. Lee. Coronary artery stent fracture. Int. J. Cardiovasc. Imaging, 23:305–309, 2007.
D. R. McClean and N. L. Eiger. Stent design: Implications for restenosis. Rev. Cardiovasc. Med., 3(5):S16–22, 2002.
F. Migliavacca, L. Petrini, M. Colombo, F. Auricchio, and R. Pietrabissa. Mechanical behavior of coronary stents investigated through the finite element method. J. Biomech., 35(6):803–811, 2002.
J. E. Moore Jr. and J. L. Berry. Fluid and solid mechanical implications of vascular stenting. Ann. Biomed. Eng., 30(4):498–508, 2002.
A. C. Morton, D. Crossman, and J. Gunn. The influence of physical stent parameters upon restenosis. Pathologie Biologie, 52:196–205, 2004.
F. Shaikh, R. Maddikunta, M. Djelmami-Hani, J. Solis, S. Allaqaband, and T. Bajwa. Stent fracture, an incidental finding or a significant marker of clinical in-stent restenosis. Catheter. Cardiovasc. Interv., 71(5):614–618, 2008.
J. Tambača. A model of irregular curved rods. In Z. Drmač, V. Hari, L. Sopta, Z. Tutek, and K. Veselić, editors, Proceedings of the Conference on Applied Mathematics and Scientific Computing (Dubrovnik, 2001), pages 289–299. Kluwer, 2003.
J. Tambača. A numerical method for solving the curved rod model. ZAMM Z. Angew. Math. Mech., 86(3):210–221, 2006.
J. Tambača, M. Kosor, S. Čanić, and D. Paniagua. Mathematical modeling of vascular stents. SIAM J. Appl. Math.Under revision.
L. H. Timmins, M. R. Moreno, C. A. Meyer, J. C. Criscione, A. Rachev, and J. E. Moore, Jr. Stented artery biomechanics and device design optimization. Med. Bio. Eng. Comput., 45(5):505–513, 2007.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2010 Springer Science+Business Media B.V.
About this chapter
Cite this chapter
Tambača, J., Čanić, S., Paniagua, D. (2010). A Novel Approach to Modeling Coronary Stents Using a Slender Curved Rod Model: A Comparison Between Fractured Xience-Like and Palmaz-Like Stents. In: Fitzgibbon, W., Kuznetsov, Y., Neittaanmäki, P., Périaux, J., Pironneau, O. (eds) Applied and Numerical Partial Differential Equations. Computational Methods in Applied Sciences, vol 15. Springer, Dordrecht. https://doi.org/10.1007/978-90-481-3239-3_5
Download citation
DOI: https://doi.org/10.1007/978-90-481-3239-3_5
Published:
Publisher Name: Springer, Dordrecht
Print ISBN: 978-90-481-3238-6
Online ISBN: 978-90-481-3239-3
eBook Packages: EngineeringEngineering (R0)