Abstract
It describes the vane shear test which is one of the most widely used in situ tests to assess the undrained shear strength of saturated cohesive soils. The test equipment and procedure to carry out the test are described in detail as well as interpretation of the data, and how the results could be used in geotechnical design. Empirical correlations are provided to correct the measured field vane shear strength values and the shortcomings in these methods are highlighted.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
ASTM D2573-08 Standard test method for field vane shear test in cohesive soil
Azzouz AS, Baligh MM, Ladd CC (1983) Corrected field vane strength for embankment design. J Geotech Eng ASCE 109(5):730–734
Bjerrum L (1972) Embankments on soft ground. In: Proceedings Performance of earth and earth-supported structures, vol 2. ASCE, Lafayette, Ind., pp 1–54
Chandler RJ (1988) The in-situ measurement of the undrained shear strength of clays using the field vane. Vane shear strength testing of soils: field & lab studies, STP1014, ASTM, West Conshohocken, pp 13–44
Donald IB, Jordan DO, Parker RJ, Toh CT (1977) The vane test - a critical appraisal. In: Proceedings of 9th international conference on soil mechanics and foundation engineering, Tokyo, vol 1, pp 151–171
Flodin N, Broms B (1981) Historical development of civil engineering in soft clay. In: Brand EW, Brenner RP (eds) Soft clay engineering. Elsevier Publications, Amsterdam
Jamiolkowski M, Ladd CC, Germaine JT, Lancellotta R (1985) New developments in field and laboratory testing of soils. In: Proceedings of 11th international conference on soil mechanics and foundation engineering, vol 1, pp 57–153
Johnston IW (1983) Why in-situ testing? In: Ervin MC (ed) Proceedings of an extension course on in-situ testing for geotechnical investigation, Sydney. A A Balkema, Rotterdam
Ladd CC (1991) Stability evaluation during staged construction (22nd Terzaghi Lecture). J Geotech Eng 117(4):540–615
Ladd CC, DeGroot DJ (2003) Recommended practice for soft ground site characterization (Arthur Casagrande Lecture). In: Proceedings 12th Pan American conference on soil mechanics and geotechnical engineering, Massachusetts Institute of Technology, Cambridge, MA
Ladd CC, Foott R, Ishihara K, Schlosser F, Poulos HG (1977) Stress-deformation and strength characteristics. In: Proceedings 9th international conference on soil mechanics and foundation engineering, Tokyo, 2, pp 421–494
Larsson R (1980) Undrained shear strength in stability calculations of embankments & foundations on clays. Can Geotech J 17(4):591–602
Leroueil S (2001) Natural slopes and cuts: movement and failure mechanisms, 39th Rankine Lecture. Geotechnique 51(3):197–243
Leroueil S, La Rochelle P, Tavenas F, Roy M (1990) Remarks on the stability of temporary cuts. Can Geotech J 27(5):687–692
Lunne T, Robertson PK, Powell JJM (1997) Cone penetration testing in geotechnical practice. Blackie Academic and Professional, London, 312pp
Mayne PW, Christopher BR, DeJong J (2001) Manual on subsurface investigations, National highway institute publication no 6. FHWA NHI-01-031 Federal Highway Administration, Washington, DC
Mesri G (1975) Discussion on “New design procedure for stability of soft clays”. J Geotech Eng Div ASCE 101(GT4):409–412
Milligan V (1972) Panel discussion, Session I. Embankments on soft ground. In: Proceedings ASCE specialty conference on performance of earth and earth-supported structures, Lafayette, vol III, pp 41–48
Mitchell JK, Houston WN (1969) Causes of clay sensitivity. J Soil Mech Found Eng ASCE 95(SM3):845–871
Morris PM, Williams DJ (1994) Effective stress vane shear strength correction factor correlations. Can Geotech J 31(3):335–342
Roscoe KH, Burland JB (1968) On the generalized stress-strain behavior of “wet” clay. In: Heyman J, Leckie FA (eds) Engineering plasticity. Cambridge University Press, Cambridge, pp 535–609
Rosenqvist I (1955) Investigations in the clay electrolyte water system, Norwegian Geotechnical Institute Publication No 9, Oslo
Schmertmann JH (1975) Measurements of in situ shear strength. In: Proceedings ASCE specialty conference on in-situ measurement of soil properties, Raleigh NC, vol 2, pp 57–138
Shannon and Wilson, Inc. (1964) Report on anchorage area soil studies, Alaska to US Army Engineering District, Anchorage, Alaska, Seattle, Washington
Skempton AW (1948) Vane tests in the alluvial plain of River Forth near Grangemouth. Geotechnique 1(2):111–124
Skempton AW, Northey RD (1952) The sensitivity of clays. Geotechnique III(I):30–53
Terzaghi K (1944) Ends and means in soil mechanics. Eng J Can 27:608
Terzaghi K, Peck RB, Mesri G (1996) Soil mechanics in engineering practice, 3rd edn. John Wiley, New York
Walker BF (1983) Vane shear strength testing. In: Ervin MC (ed) In situ testing for geotechnical investigations. A A Balkema, Rotterdam, pp 65–72
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer India
About this chapter
Cite this chapter
Ameratunga, J., Sivakugan, N., Das, B.M. (2016). Vane Shear Test. In: Correlations of Soil and Rock Properties in Geotechnical Engineering. Developments in Geotechnical Engineering. Springer, New Delhi. https://doi.org/10.1007/978-81-322-2629-1_8
Download citation
DOI: https://doi.org/10.1007/978-81-322-2629-1_8
Published:
Publisher Name: Springer, New Delhi
Print ISBN: 978-81-322-2627-7
Online ISBN: 978-81-322-2629-1
eBook Packages: EngineeringEngineering (R0)