Abstract
Nd:YAG laser microdrilling of SiC30BN nanocomposite material is studied here. Taguchi based grey relational analysis is used to simultaneously determine the optimum setting for minimum hole taper and HAZ width. Grey relation analysis is adopted for combining multiple quality characteristics into one integrated numerical value called Grey relational grade. A L27 orthogonal array has been used for conducting experiments. Lamp current, pulse frequency, pulse width, assist gas pressure and focal distance are considered as input process parameters whereas hole taper and HAZ width are considered as machining responses. It is observed that the quality characteristics of drilled micro holes are improved markedly at the optimized parameter settings as compared to quality levels achieved for initial machine parameter settings.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Acherjee, B., Kuar, A. S., Mitra, S., & Misra, D. (2010). Selection of process parameters for optimizing the weld strength in laser transmission welding of acrylic. Proceedings of the IMechE Part B: Journal of Engineering Manufacture, 224(B10), 1529–1536.
Ajayan, P. M., Schadler, L. S., & Braun, P. V. (2003) Nanocomposite science and technology. New York: Wiley. ISBN 3527303596.
Anawa, E. M., & Olabi, A. G. (2008). Using Taguchi method to optimize welding pool of dissimilar laser-welded component. Optics and Laser Technology, 40, 379–388.
Aqeeli, N. A. (2011). The corrosion behavior of electrodeposited and laser irradiated ni-co nanostructured alloy. Reviews Advanced Material Science, 27, 75–82.
Bachman, F. (1989). Excimer lasers in a fabrication line for a highly integrated printed circuit board. Chemtronics, 4, 149.
Bäuerle, D. (2000). Laser Processing and Chemistry. New York: Springer. ISBN 3540668918.
Benga, G., Gingu, O., Ciupitu, I., Gruionu L., Pascu, I., & Moreno, J. C. (2010). Processing and laser micromachining of HAP based biocomposites. Engineering the Future. ISBN 978-953-307-210-4.
Biswas, R., Kuar, A. S., Sarkar, S., & Mitra, S. (2010a). A parametric study of pulsed Nd:YAG laser micro-drilling of gamma-titanium aluminide. Optics and Laser Technology, 42, 23–31.
Biswas, R., Kuar, A. S., Biswas, S. K., & Mitra, S. (2010b). Effects of process parameters on hole circularity and taper in pulsed Nd:YAG laser microdrilling of Tin-Al2O3 composites. Materials and Manufacturing Processes, 25, 503–514.
Chryssolouris, G. (1991). Laser machining theory and practice. New York: Springer.
Corcoran, A., Sexton, L., Seaman, B., Ryan, P., & Byrne, G. (2002). The laser drilling of multi-layer aerospace material systems. Journal of Materials Processing Technology, 123, 100–106.
Dahotre, N. B., & Harimkar, S. P. (2008). Laser fabrication and machining of materials. New York, NY: Springer.
Dandekar, C. R., & Shin, Y. C. (in press). Modelling of machining of composite materials: A review. International Journal of Machine Tools & Manufacture.
Das, R. N., Egitto, F. D., Lauffer, J. M., & Markovich, V. R. (2008). Laser Micromachining of barium titanate (BaTiO3)-epoxy nanocomposite-based flexible/rollable capacitors: New approach for making library of capacitors. Electronics Packaging Manufacturing, IEEE Transactions, 31, 97–103.
Davim, P. J. (2013). Nontraditional machining processes, research advances. London: Springer. doi:10.1007/978-1-4471-5179-1. ISBN 978-1-4471-5178-4.
Fung, C. P. (2003). Manufacturing process optimization for wear property of fiber-reinforced polybutylene terephthalate composites with grey relational analysis. Wear, 254, 298–306.
Gurauskis, J., Sola, D., Pena, J. I., & Orera, V. M. (2008). Laser drilling of Ni–YSZ cermets. Journal of the European Ceramic Society, 28, 2673–2680.
Kuar, A. S., Doloi, B., & Bhattacharyya, B. (2006). Modelling and analysis of pulsed Nd:YAG laser machining characteristics during micro-drilling of zirconia (ZrO2). International Journal of Machine Tools and Manufacturing, 46(12–13), 1301–1310.
Lasagni, F. A., & Lasagni, A. F. (2011). Fabrication and characterization in the micro-nano range. Advanced Structured Materials, 10. doi:10.1007/978-3-642-17782-8_2.
Low, D. K. Y., Li, L., & Corfe, A. G. (2001). Spatter-free laser percussion drilling of closely spaced array holes. International Journal of Machine Tools and Manufacture, 41, 361–377.
Low, D. K. Y, Li, L., & Byrd, P. J. (2000). Taper formation and control during laser drilling in nimonic 263 alloy. In Proceedings of 33rd International MATADOR Conference, pp. 461–66.
Li, L., Hong, M., Schmidt, M., Zhong, M., Malshe, A., Huis. B. H. & Kovalenko, V. (2011). Laser nano-manufacturing—State of the art and challenges. CIRP Annals—Manufacturing Technology, 60, 735–755.
Meijer, J. (2004). Laser beam machining (LBM), state of the art and new opportunities. Journal of Material Process Technology, 149, 2–17.
Okamoto, Y., Sakagawa, T., Nakamura, H., & Uno, Y. (2010). Micro-machining characteristics of ceramics by harmonics of Nd:YAG laser. Journal of Advanced Mechanical Design, Systems, and Manufacturing, 4(2), 661–667.
Pan, L. K., Wang, C. C., Wei, S. L., & Sher, H. F. (2007). Optimizing multiple quality characteristics via Taguchi method-based Grey analysis. Journal of Materials Processing Technology, 182, 107–116.
Pandey, P. C. & Shan, H. S. (2004). Modern machining processes. India: Tata McGraw Hill BookCom. 0-07096-553-6.
Phadke, M. S. (1989). Quality engineering using robust design. Englewood Cliffs, New Jersey: Prentice Hall.
Ready, J. F., & Farson, D. F. (2001). LIA handbook of laser materials processing. Orlando: Laser Institute of America.
Rega, Y., Leitzb, B. & Schmidta, M. (2011). Influence of processing gas on the ablation quality at ns-laser beam ablatio. Physics Procedia, 12, 182–187.
Rodden, W. S. O., Kudesia, S. S., Hand, D. P., & Jones, J. D. C. (2002). A comprehensive study of the long pulse Nd:YAG laser drilling of multi-layer carbon fibre composites. Optics Communication, 210, 319–328.
Ross, P. J. (1996). Taguchi techniques for quality engineering (2nd ed.). New Delhi, India: Tata McGraw-Hill Publishing Company Ltd.
Russo, R. (1995). Laser ablation. Applied Spectroscopy, 49(9), 14A–28A.
Salonitis, K., Stournaras, A., Tsoukantas, G., Stavropoulos, P., & Chryssolouris, G. (2007). A theoretical and experimental investigation on limitations of pulsed laser drilling. Journal of Material Processing and Technology, 183(1), 96–103.
Samant, A. N., & Dahotre, N. B. (2009). Laser machining of structural ceramics—A review. Journal of the European Ceramic Society, 29, 969–993.
Sanikommu, N., Bathe, R., & Joshi, A. S. (2007). Detection of breakthrough in laser percussion drilling. Lasers in Engineering, 17, 361–369.
Tam, S. C., Yeo, C. Y., Jana, S., & Lau, M. W. (1994). A technical review of the laser drilling of aerospace materials. Journal of Materials Processing Technology, 42, 15–49.
Tönshoff, H. K., & Kappel, H. (1998). Surface modification of ceramics by laser machining. CIRP Annal—Manufacturing Technology, 47(1), 471–474.
Xiangdong, W., Guanjun, Q., & Zhihao, J. (2004). Fabrication of machinable silicon carbide-boron nitride ceramic nanocomposites. Journal of the American Ceramic Society, 87, 565–570.
Yilbas, B. S. (1988). The examination of optimal focus setting with material thickness at atmospheric pressures of air and oxygen in laser drilling of metals. Proceedings of Institution of Mechanical Engineers Part B, Journal of Engineering Manufacture, 202, 123–127.
Yilbas, B. S. (1997). Parametric study to improve laser hole drilling process. Journal of Materials Processing Technology, 70, 264–273.
Yilbas, B. S. (2013). Laser drilling, springer briefs in manufacturing and surface engineering. doi:10.1007/978-3-642-34982-9_1, ISBN 978-3-642-34981-2.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer India
About this chapter
Cite this chapter
Roy, N., Kuar, A.S., Mitra, S., Acherjee, B. (2015). Nd:YAG Laser Microdrilling of SiC-30BN Nanocomposite: Experimental Study and Process Optimization. In: Joshi, S., Dixit, U. (eds) Lasers Based Manufacturing. Topics in Mining, Metallurgy and Materials Engineering. Springer, New Delhi. https://doi.org/10.1007/978-81-322-2352-8_17
Download citation
DOI: https://doi.org/10.1007/978-81-322-2352-8_17
Published:
Publisher Name: Springer, New Delhi
Print ISBN: 978-81-322-2351-1
Online ISBN: 978-81-322-2352-8
eBook Packages: EngineeringEngineering (R0)