Abstract
CO2 laser micromachining provides low cost machining solution for fabrication of three dimensional microfluidic channels on poly-methyl-methacrylate(PMMA ). In this research work CO2 laser microchanneling process has been analyzed from the first principle. Considering the Gaussian distribution of laser beam, an energy based model has been proposed to predict the microchannel depth and channel profile. For fabricating microfluidic devices, PMMA has emerged as a cheap alternative to many other costly materials like silicon, quartz etc. Its material properties like absorptivity and thermal properties have been investigated. In order to physically verify the proposed model, experiments have been performed on a 3 mm thick PMMA sheet and actual and predicted results have been compared. Simultaneous TGA/DSC tests have been conducted to determine various thermal properties of PMMA. Since thermal conductivity of the PMMA is very low, the conduction loss has been neglected while developing the model. The proposed model successfully predicts the channel depth and profile without much loss of accuracy. energy based analysis has been found to be simple yet powerful method to predict the channel dimensions for low thermal conductivity materials.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Castaño-Álvarez, M., Pozo Ayuso, D. F., Garcia Granda, M., Fernández-Abedul, M. T., Rodriguez Garcia, J., & Costa-Garcia, A. (2008). Critical points in the fabrication of microfluidic devices on glass substrates. Sensors and Actuators B: Chemical, 130, 436–448.
Dahotre, N. B., & Harimkar, S. P. (2007). Laser Fabrication and Machining of Materials (1st ed.). Springer, London.
Helebrant, A., Buerhop, C., & Weissmann, R. (1993). Mathematical modelling of temperature distribution during CO2 laser irradiation of glass. Glass Technology, 34(4), 154–158.
Iliescu, C., Taylor, H., Avram, M., Miao, J., & Franssila, S. (2012). A practical guide for the fabrication of microfluidic devices using glass and silicon. Biomicrofluidics, 6(1), 016505.
Julia, J. E., Aboites, V., & Casillas, M. A. (1998). CO2 laser interaction with biological tissue. Instrumentation and Development, 3(10).
Klank, H., Kutter, J. P., & Geschke, O. (2002). CO2-laser micromachining and back-end processing for rapid production of PMMA-based microfluidic systems. Lab on a Chip, 2(4), 242–246.
Madic, M., Radovanovic, M., & Nedic, B. (2012). Correlation between surface roughness characteristics in CO2 laser cutting of mild steel. Tribology in Industry, 34(4), 232–238.
Malek, C. G. K. (2006). Laser processing for bio-microfluidics applications (part ii). Analytical and Bioanalytical Chemistry, 385(8), 1362–1369.
Powell, J. (1998). CO 2 laser cutting (2nd ed.). London: Springer.
Prakash, S., & Kumar, S. (2014). Fabrication of microchannels: A review. In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. doi:10.1177/0954405414535581.
Prakash, S., Acherjee, B., Kuar, A. S., & Mitra, S. (2013). An experimental investigation on ND: YAG laser microchanneling on polymethyl methacrylate submerged in water. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 227(4), 508–519.
Qi, H., Chen, T., Yao, L., & Zuo, T. (2009). Micromachining of microchannel on the polycarbonate substrate with CO2 laser direct writing ablation. Optics and Lasers in Engineering, 47(5), 594–598.
Radice, J. J., Joyce, P., Tresansky, A., & Watkins, R. (2012). A comsol model of damage evolution due to high energy laser irradiation of partially absorptive materials. In: Excerpts from the Proceedings of the 2012 COMSOL Conference in Boston.
Russom, A., Gupta, A. K., Nagrath, S., Carlo, D. D., Edd, J. F., & Toner, M. (2009). Differential inertial focusing of particles in curved low-aspect-ratio microchannels. New Journal of Physics, 11(7), 075025.
Shulepov, M. A., Bulgakova, N. M., Zakharov, L. A., Panchenko, A. N., & Telminov, A. E. (2010). CO2 laser ablation of poly (methyl methacrylate) and polyimide: Experiment and theory. In: Proceedings of the 10th International Conference on Modification of Materials with Particle Beams and Plasma Flow (pp. 132–135).
Snakenborg, D., Klank, H., & Kutter, J. P. (2004). Microstructure fabrication with a CO2 laser system. Journal of Micromechanics and Microengineering, 14(2), 182.
Xiang, H., Fu, J., & Chen, Z. (2006). 3D finite element modeling of laser machining PMMA. In: 1st IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2006, NEMS’06 (pp.942–946).
Yuan, D., & Das, S. (2007). Experimental and theoretical analysis of direct-write laser micromachining of polymethyl methacrylate by CO2 laser ablation. Journal of Applied Physics, 101(2), 024901.
Zhou, B. H., & Mahdavian, S. M. (2004). Experimental and theoretical analyses of cutting nonmetallic materials by low power CO2-laser. Journal of Materials Processing Technology, 146(2), 188–192.
Acknowledgments
The authors gratefully acknowledge the financial support from Department of Science and technology (DST), Govt. of India for providing INSPIRE fellowship to one of the author for carrying out this research.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer India
About this chapter
Cite this chapter
Prakash, S., Kumar, S. (2015). Energy Based Analysis of Laser Microchanneling Process on Polymethyl Methacrylate (PMMA). In: Joshi, S., Dixit, U. (eds) Lasers Based Manufacturing. Topics in Mining, Metallurgy and Materials Engineering. Springer, New Delhi. https://doi.org/10.1007/978-81-322-2352-8_14
Download citation
DOI: https://doi.org/10.1007/978-81-322-2352-8_14
Published:
Publisher Name: Springer, New Delhi
Print ISBN: 978-81-322-2351-1
Online ISBN: 978-81-322-2352-8
eBook Packages: EngineeringEngineering (R0)