Abstract
To predict the behavior of composites in case of low velocity impact, there are various material models available in literature. Either the complex implementation or determination of large number of required material parameters is proving a common major limitation among all these. In the present study, low velocity Impact experiments are performed on E-glass/epoxy composite and numerically simulated using a continuum damage mechanics based material model. The damage observed as back face signature on the laminate, contact forces and displacement plots with respect to time are studied and compared with FE results to demonstrate the effectiveness of the model. The digital image correlation (DIC) technique is used for experimentation to obtain displacement on the surface of the plate.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Abrate Serge (1998) Impact on composite structures. Cambridge University Press, Cambridge
Caprino G et al (1999) Influence of material thickness on the response of carbonfabric/ epoxy panels to low velocity impact. Compos Sci Technol 59:2279–2286
Mili F, Necib B (2001) Impact behavior of cross-ply laminated composite plates under low velocities. Compos Struct 51(3):237–244
Belingardi G, Vadori R (2002) Low velocity impact tests of laminate glass-fiberepoxy matrix composite material plates. Int J Impact Eng 27:213–229
Aslan R, Karakuzu Z, Okutan B (2003) The response of laminated composite plates under low velocity impact loading. Compos Struct 59:119–127
Mitrevski T, Marshall IH, Thomson R (2006) The influence of impactor shape on the damage to composite laminates. Compos Struct 76:116–122
Schoeppner GA, Abrate S (2000) Delamination threshold loads for low-velocity impact on composite laminates. Compos A Appl Sci Manuf 31:903–915
Ambur DR, Starnes JH, Prasad CB (1995) Low-speed impact damage-initiation characteristics of selected laminated composite plates. AIAA J 33(10):1919–1925
Dumont JP et al. (1987) Damage mechanics for 3-D composites. Compos Struct 8(2):119–141
Iannucci L, Ankersen J (2006) An energy based damage model for thin laminated composites. Compos Sci Technol 66(7-8):934–951
Donadon MV et al (2008) A progressive failure model for composite laminates subjected to low velocity impact damage. Comput Struct 86(11–12):1232–1252
Raimondo et al L (2012) A progressive failure model for mesh-size-independent FE analysis of composite laminates subject to low-velocity impact damage. Compos Sci Technol 72(5):624–632
Shi Y, Swait T, Soutis C (2012) Modelling damage evolution in composite laminates subjected to low velocity impact. Compos Struct 94(9):2902–2913
Matzenmiller A, Lubliner J, Taylor RL (1995) A constitutive model for anisotropic damage in fiber-composites. Mech Mater 20(2):125–152
Puck A, Schurmann H (1998) Failure analysis of FRP laminates by means of physically based phenomenological models. Compos Sci Technol 3538(96):1045–1067
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer India
About this paper
Cite this paper
Singh, H., Mahajan, P., Namala, K.K. (2015). A Progressive Failure Study of E-glass/Epoxy Composite in Case of Low Velocity Impact. In: Matsagar, V. (eds) Advances in Structural Engineering. Springer, New Delhi. https://doi.org/10.1007/978-81-322-2190-6_25
Download citation
DOI: https://doi.org/10.1007/978-81-322-2190-6_25
Published:
Publisher Name: Springer, New Delhi
Print ISBN: 978-81-322-2189-0
Online ISBN: 978-81-322-2190-6
eBook Packages: EngineeringEngineering (R0)