Skip to main content

Characterization of Recycled Aggregate Concrete

  • Conference paper

Abstract

The effects of using crushed waste concrete as coarse aggregates upon fresh and hardened properties of concrete were investigated through series of testing concrete cylinder specimens to failure. The coarse recycled concrete aggregate (RCA) used in this investigation was sourced from the tested concrete specimens like cubes, cylinders, prisms and beam specimens originally tested for various purposes in the concrete testing laboratory of IIT Roorkee. Total six numbers of concrete mixtures were prepared. These mixtures were differing only in amount of coarse RCA used. The mixture without any RCA was referred as control mixture. Considerable effect of replacement level on compressive strength was observed. Moreover increase in peak strain and significant decrease in static modulus was observed. Stress-strain curves generated during testing were utilized to evaluate normalized toughness and ductility index. Higher value of replacement level found decreasing normalized toughness and ductility index.

This is a preview of subscription content, log in via an institution.

Buying options

Chapter
USD   29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
USD   169.00
Price excludes VAT (USA)
  • Available as EPUB and PDF
  • Read on any device
  • Instant download
  • Own it forever
Softcover Book
USD   219.99
Price excludes VAT (USA)
  • Compact, lightweight edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info
Hardcover Book
USD   219.99
Price excludes VAT (USA)
  • Durable hardcover edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Learn about institutional subscriptions

References

  1. Bhattacharyya SK, Barai SV, Chakradhar Rao M (2011) Recycled coarse aggregates and its use in concrete. ICI J 11(4):27–40

    Google Scholar 

  2. Singh SK & Sharma PC (2007) “Use of recycled aggregates in concrete—A paradigm shift”. J N Build Mater Constr World 13(4):173–183

    Google Scholar 

  3. Bureau of Indian Standards, IS 1489 Part (I), 43 grade ordinary Portland cement-specification (reaffirmed 2005). Bureau of Indian standards, New Delhi (India)

    Google Scholar 

  4. Bureau of Indian Standards, IS 383-1970, Specification for coarse and fine aggregate from natural sources for concrete. Bureau of Indian standards, New Delhi (India)

    Google Scholar 

  5. Bureau of Indian Standards, IS 2386-1967 Part (III), Method of test for aggregates for concrete. Bureau of Indian standards, New Delhi (India)

    Google Scholar 

  6. Bureau of Indian Standards, IS 10262-1982, Guidelines for concrete mix design. Bureau of Indian Standards, New Delhi (India)

    Google Scholar 

  7. Bureau of Indian Standards, IS 516-1959, Method of tests for strength of concrete. Bureau of Indian standards, New Delhi (India)

    Google Scholar 

  8. Bureau of Indian Standards, IS 2854-1964, Method of test for determining modulus of elasticity. Bureau of Indian standards

    Google Scholar 

  9. Vivian WY, Tam CM, Le KN (2007) Removal of cement mortar remains from recycled aggregate using pre-soaking approaches. Resour Conserv Recycl 50(1):82–101

    Article  Google Scholar 

  10. Poon CS, Shui ZH, Lam L, Fok H, Kou SC (2004) Influence of moisture states of natural and recycled aggregates on the slump and compressive strength of concrete. Cem Concr Res 34(1):31–36

    Article  Google Scholar 

  11. Xiao J, Li J, Zhang C (2005) Mechanical properties of recycled aggregate concrete under uniaxial loading. Cem Concr Res 35(6):1187–1194

    Article  Google Scholar 

  12. Etxeberria M, Vázquez E, Marà A, Barra M (2007) Influence of amount of recycled coarse aggregates and production process on properties of recycled aggregate concrete. Cem Concr Res 37(5):735–742

    Google Scholar 

  13. González-Fonteboa B, Martínez-Abella F, Carro López D, Seara-Paz S (2011) Stress-strain relationship in axial compression for concrete using recycled saturated coarse aggregate. Constr Build Mater 25:2335–2342

    Google Scholar 

  14. Bhikshma V, Kiskore R (2011) Development of stress block and design parameters for recycled aggregate concrete members. Asian J Civ Eng (Build Hous) 12(2):179–195

    Google Scholar 

  15. Ridzuan ARM (2001) The influence of recycled aggregate concrete on the early compressive strength and drying shrinkage of concrete. In: Proceeding of the international conference on structural engineering, mechanics and computation, 2001, pp 1415–1421

    Google Scholar 

  16. Rao A, Jha KN, Misra S (2007) Use of aggregates from recycled construction and demolition waste in concrete. Resour Conserv Recycl 50(1):71–81

    Article  Google Scholar 

  17. Sahoo DK (2009) An investigation of the strength of bottle-shaped struts. Ph.D thesis, Indian Institute of Technology Roorkee, Roorkee (India), 2009

    Google Scholar 

  18. Bureau of Indian Standards, IS 456, Plain and reinforced concrete-code of practice. Bereau of Indian Standards, New Delhi (India)

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Editor information

Editors and Affiliations

Rights and permissions

Reprints and permissions

Copyright information

© 2015 Springer India

About this paper

Cite this paper

Suryawanshi, S.R., Singh, B., Bhargava, P. (2015). Characterization of Recycled Aggregate Concrete. In: Matsagar, V. (eds) Advances in Structural Engineering. Springer, New Delhi. https://doi.org/10.1007/978-81-322-2187-6_139

Download citation

  • DOI: https://doi.org/10.1007/978-81-322-2187-6_139

  • Publisher Name: Springer, New Delhi

  • Print ISBN: 978-81-322-2186-9

  • Online ISBN: 978-81-322-2187-6

  • eBook Packages: EngineeringEngineering (R0)

Publish with us

Policies and ethics