Abstract
Fly ash is used as a supplementary cementitious material in concrete. In order to determine the strength of fly ash concrete similar to ordinary Portland cement concrete at a required age, one of the methods of designing concrete mix is by using efficiency factor (k-value ) concept. This paper presents the utility of this concept for predicting the strength of fly ash concrete. The 28 days strength-based efficiency factor is 0.54 for 25 % fly ash and 0.35 for 45 % fly ash. The proposed efficiency factor is applicable to wide range of strength and fly ash percentage.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Papadakis VG, Tsimas S (2002) Supplementary cementing materials in concrete, part I: efficiency and design. Cement Concr Res 32(10):1525–1532
Aïtcin P-C (1998) High-performance concrete. E & FN Spon, London
Pusa V (2011) Study on mechanical and durability properties of concrete with specific reference to fly ash. Indian Institute of Technology, Delhi
Popovics S (1998) Strength and related properties of concrete, a quantitative approach. Wiley, New York
Smith IA (1967) The design of fly-ash concretes. In: Institution of civil engineers proceedings, vol 36(4), pp 769–790
Dunstan ER Jr (1986) A concrete proportioning odyssey—the optimum/pessimum fly ash percentage. A paper presented at the ACI fall meeting, ACI, Baltimore
Bijen J, Selst VR (1993) Cement equivalence factors for fly ash. Cem Concr Res 23(5):1029–1039
Hassaballah A, Wenzel TH (1995) A strength definition for the water to cementitious materials ratio. ACI SP 153–24 153:417–438
Babu KG, Rao GS (1993) Efficiency of fly ash in concrete. Cement Concr Compos 15(4):223–229
Babu KG, Rao GS (1994) Early strength behaviour of fly ash concretes. Cem Concr Res 24(2):277–284
Babu KG, Rao GS (1996) Efficiency of fly ash in concrete with age. Cem Concr Res 26(3):465–474
Papadakis VG, Antiohos S, Tsimas S (2002) Supplementary cementing materials in concrete, part II: a fundamental estimation of the efficiency factor. Cement Concr Res 32(10):1533–1538
Oner A, Akyuz S, Yildiz R (2005) An experimental study on strength development of concrete containing fly ash and optimum usage of fly ash in concrete. Cem Concr Res 35(6):1165–1171
Vollpracht A, Brameshuber W (2010) Performance-concept, k-value approach-which concept offers which advantages? In: International RILEM conference on material science. RILEM Publications SARL, Bagneux, France
Yildirim H, Sumer M, Akyuncu V, Gurbuz E (2011) Comparison of efficiency factors of F and C types of fly ashes. Constr Build Mater 25(6):2939–2947
Cho HB, Jee NY (2011) Prediction model for cementing efficiency of fly ash concrete by statistical analyses. Adv Mater Res 250–253:1293–1296
Cho HB, Jee NY, Shin NY (2012) Strength prediction of fly ash concrete using cementing efficiency by statistical analysis. Adv Mater Res 374–377:1774–1777
Dinakar P (2012) Design of self-compacting concrete with fly ash. Mag Concr Res 64(5):401–409
BS EN 206 (2013) Concrete-specification, performance, production and conformity. British Standards Institute (BSI), London
BS EN 450-1 (2012) Fly ash for concrete. Definition, specifications and conformity criteria. British Standards Institute (BSI), London
BS EN 197-1 (2011) Cement: composition, specifications and conformity criteria for common cements. British Standards Institute (BSI), London
IS 8112 (2013) Ordinary Portland cement, 43 grade-specification (second revision). Bureau of Indian Standards (BIS), New Delhi, India
IS 3812 (Part 1) (2013) Pulverized fuel ash-specification, Part 1, for use as pozzolana in cement, cement mortar and concrete (third revision). Bureau of Indian Standards (BIS), New Delhi, India
ASTM C618-12a (2012) Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete. ASTM International, West Conshohocken
IS 383 (1970) Specification for coarse and fine aggregates from natural sources for concrete (second revision). Reaffirmed 2002, Bureau of Indian Standards (BIS), New Delhi, India
IS 456 (2000) Plain and reinforced concrete—code of practice (fourth revision). Up to Amendment No. 4, 2013, Bureau of Indian Standards (BIS), New Delhi, India
IS 9103 (1999) Concrete admixtures-specification (first revision) (incorporating amendment nos. 1 and 2). Reaffirmed 2004, Bureau of Indian Standards (BIS), New Delhi, India
ASTM C128-07a (2007) Standard test method for density, relative density (specific gravity), and absorption of fine aggregate. ASTM International, West Conshohocken
Acknowledgment
The authors would like to thank personnel of Badarpur Thermal Power Station of National Thermal Power Corporation (NTPC) Ltd. for providing fly ash freely. Assistance rendered by Mr. Gautam Barai, Mr. Pradeep Negi and other staffs of Concrete Structures Laboratory, Department of Civil Engineering, Indian Institute of Technology (IIT) Delhi, New Delhi, India is gratefully acknowledged.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer India
About this paper
Cite this paper
Murumi, K., Gupta, S. (2015). Evaluating the Efficiency Factor of Fly Ash for Predicting Compressive Strength of Fly Ash Concrete. In: Matsagar, V. (eds) Advances in Structural Engineering. Springer, New Delhi. https://doi.org/10.1007/978-81-322-2187-6_133
Download citation
DOI: https://doi.org/10.1007/978-81-322-2187-6_133
Publisher Name: Springer, New Delhi
Print ISBN: 978-81-322-2186-9
Online ISBN: 978-81-322-2187-6
eBook Packages: EngineeringEngineering (R0)