Advertisement

10M Long Silver-Sheathed Tl-Ba/Sr-Ca-Cu-O Superconducting Tapes

  • Fumikazu Hosono
  • Akira Nomoto
  • Tadashi Umezawa
  • Masahiro Seido
  • Toshimi Matsumoto
  • Katsuzo Aihara
Conference paper

Abstract

Silver-sheathed Tl-Ba/Sr-Ca-Cu-O tapes, 10m long, were fabricated by a newly developed continuous pressing technique instead of the conventional rolling or short sample pressing technique. This continuous pressing technique provides highly densified polycrystalline oxide cores in the 10m superconducting tapes, similar to those in the pressed high-quality short samples. Critical current densities at several sections of the 10m long continuous pressed tape reached 104 A/cm2 at 77K without external magnetic fields, and deviations of the Jc values were within +2% throughout the whole tape length. Furthermore, the 10m long tape was wound into a pancake type coil of 30mm bore diameter. This coil generated a maximum magnetic field of 103 gauss and also a magnetic field of 47 gauss at the center of the coil.

Keywords

External Magnetic Field Critical Current Density Deformation Pattern Short Sample Maximum Magnetic Field 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. [1]
    M. K. Wu et al., Phys. Rev. Lett., 58 (1987) 908.ADSCrossRefGoogle Scholar
  2. [2]
    H. Maeda et al., Jpn. Appl. Phys., 27 (1988) L209.ADSCrossRefGoogle Scholar
  3. [3]
    Z. Z. Sheng et al., Phys. Rev. Lett., 60 (1988) 937.ADSCrossRefGoogle Scholar
  4. [4]
    M. Okada et al., Jpan. J. Appl. Phys., 27 (1988) L185.ADSCrossRefGoogle Scholar
  5. [5]
    M. Seido et al., Proc. 2nd. Symp. on Superconductivity, (1988).Google Scholar
  6. [6]
    A. Soeta et al., Jpn. J. Appl. Phys., 28 (1989) L1185.ADSCrossRefGoogle Scholar
  7. [7]
    T. Matsumota et al., ISTEC Workshop on Superconductivity, (1989) p111.Google Scholar

Copyright information

© Springer-Verlag Tokyo 1991

Authors and Affiliations

  • Fumikazu Hosono
    • 1
  • Akira Nomoto
    • 1
  • Tadashi Umezawa
    • 1
  • Masahiro Seido
    • 1
  • Toshimi Matsumoto
    • 2
  • Katsuzo Aihara
    • 2
  1. 1.Metal Research Laboratory of Hitachi Cable Ltd.Tsuchiura, Ibaraki, 300Japan
  2. 2.Hitachi Research Laboratory of Hitachi Ltd.Hitachi, Ibaraki, 319-12Japan

Personalised recommendations