Investigation Methods of Performance Characteristics for Double-Fed Machines with Converter in Rotor Circuit. Summary of Main Investigation Stages of A.C. Machines

  • Iliya Boguslawsky
  • Nikolay Korovkin
  • Masashi Hayakawa


This chapter presents investigation methods on operation modes of high-power double-fed machines (DFMs) with frequency converter in rotor circuit. These methods are checked experimentally and are used in modern practice, for example, in production of these machines for operation both in modes of frequency-controlled motors and generators with variable rotation speed.


Induction Motor Magnetic Circuit Type Machine Frequency Converter Synchronous Machine 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.


I. Monographs, General Courses, Textbooks

  1. 1.
    Demirchyan K.S., Neyman L.R., Korovkin N.V., Theoretical Electrical Engineering. Moscow – St.Petersburg: Piter, 2009. Vol. 1, 2. (in Russian).Google Scholar
  2. 2.
    Kuepfmueller K., Kohn G., Theoretische Elektrotechnik und Elektronik. 15 Aufl. Berlin, N.Y.: Springer, 2000. (in German).Google Scholar
  3. 3.
    Mueller G., Ponick B., Elektrische Maschinen, N.Y.: John Wiley, 2009. (in German).Google Scholar
  4. 4.
    Voldek A.I., Electrical Machines. Leningrad: Energiya, 1974. (in Russian).Google Scholar
  5. 5.
    Schuisky W., Berechnung elektrischer Maschinen. Wien: Springer, 1960. (in German).Google Scholar
  6. 6.
    Botvinnik M.M., Forced regulation and excitation of the double power supplied machines. Moscow: Torus-Press, 2011. (in Russian).Google Scholar
  7. 7.
    Botvinnik M.M., Shakaryan Yu.G., Controlled A.C. Machine. Moscow: Nauka, 1969. (in Russian).Google Scholar
  8. 8.
    Zagorskiy A.E., Shakaryan Yu.G., Control of Transients in A.C. Machines. Moscow: Energoatomizdat, 1986. (in Russian).Google Scholar
  9. 9.
    Radin V.I., Zagorskiy A.E., Shakaryan Yu.G., Controllable Electric Generators Under Variable Frequency. Moscow: Energiya, 1978. (in Russian).Google Scholar
  10. 10.
    Dreyfuss L., Kommutatorkaskaden und Phasenverschieber. Berlin: Springer, 1931. (in German).Google Scholar
  11. 11.
    Walker M., The Control of the Speed and Power Factor of Induction Motors. London: Pittman, 1924.Google Scholar
  12. 12.
    Onistchenko G.B., The asynchronous gate stages and the double power supplied machines. Moscow. Energiya, 1979. (in Russian).Google Scholar
  13. 13.
    Mueller G., Vogt K., Ponick B., Berechnung elektrischer Maschinen. Berlin: Springer, 2007. (in German).Google Scholar
  14. 14.
    Boguslawsky I.Z., A.C. motors and generators. The theory and investigation methods by their operation in networks with non linear elements. Monograph. TU St.Petersburg Edit., 2006. Vol. 1; Vol.2. (in Russian).Google Scholar
  15. 15.
    Ruedenberg R., Elektrische Schaltvorgaenge. Berlin, Heidelberg, N.Y.: Springer, 1974. (in German).Google Scholar
  16. 16.
    Richter R., Elektrische Maschinen. Berlin: Springer. Band I, 1924; Band II, 1930; Band III, 1932; Band IV, 1936; Band V, 1950. (in German).Google Scholar
  17. 17.
    Construction of Electrical Machines. Edited by of Kopylov, I.P. Moscow: Energiya, 1980. (in Russian).Google Scholar
  18. 18.
    Korn G., Korn T., Mathematical Handbook., N.Y.: McGraw – Hill, 1961.Google Scholar
  19. 19.
    Turbogenerators. The calculation and constructing. Edited by Ivanov N.P. and Lyuter R.A. Leningrad, Energiya, 1967. (in Russian).Google Scholar

II. Induction Machines. Papers, Inventor’s Certificates

  1. 20.
    Antonov V.V., Boguslawsky I.Z., Kochetkova E.Yu., Rogachevskiy V.S., Method of steady state modes calculating of asynchronized synchronous generator. Elektrotechnika, #2, 1992. (in Russian).Google Scholar
  2. 21.
    Boguslawsky I.Z., Danilevich Ya.B., Popov V.V., Features of the calculation of electromagnetic loads and the power factor of the rotor of asynchronized synchronous generator at different slips. Proceedings of the Russian Academy of Sciences. Energetika. #6, 2011. (in Russian).Google Scholar
  3. 22.
    Boguslawsky I.Z., Danilevich Ya.B., Popov V.V., Rogachevskiy V.S., Features of the calculation of electromagnetic loads of double power supplied machines with take into account the saturation and high harmonics. Proceedings of the Russian Academy of Sciences. Energetika. #6, 2013. (in Russian).Google Scholar
  4. 23.
    Boguslawsky I.Z., Double power supplied asynchronous machine with converter in the rotor winding performance investigation method. Proceedings of the Int. Symp.UEES-01. Helsinki. 2001.Google Scholar
  5. 24.
    Boguslawsky I.Z., Berechnung der Zusatzverluste in den Staenderwicklungen von modernen Wechselstrommaschinen. Archiv fuer Elektrotechnik (El. Eng.), #5, 1994, Springer Verlag, Berlin. (in German).Google Scholar
  6. 25.
    Boguslawsky I.Z., Dubitsky S.D., Korovkin N.V., Research Methods for the Slot-Ripple EMF in Large Double-Fed Machines. IEEE Russia (Northwest) Section. December, 2012. St.Petersburg.Google Scholar
  7. 26.
    Demirchyan K.S., Boguslawsky I.Z., The calculation of the currents and the losses in the rotor short-circuited induction motor using the generalized characteristics of the rotor MMF. Electrichestvo, #5, 1980 (in Russian).Google Scholar
  8. 27.
    Dir R., Neuffer J., Schlueter W., Waldmann H., Neuartige Elektronische Regeleinrichtungen Fuer Doppelgespeiste Asynchronmotoren von Stromrichterkaskaden. Wiss. Z. Elektrotechnik, 1971, #5 (in German).Google Scholar
  9. 28.
    Kuwabara T., Shibuya A., Furuta H., Kita E., Design and dynamic response characteritics of 400 MW adjustable speed pumped storage unit. IEEE Transactions on Energy Conversion. 1996, Vol. 11, #2.Google Scholar
  10. 29.
    Aguro K., Kato M., Kichita F., Machino T., Mukai K., Nagura O., Sekiguchi S., Shiozaki T., Rich operation experience and new technologies on adjustable speed pumped storage systems in Japan. SIGRE. 2008.Google Scholar
  11. 30.
    Boguslawsky I.Z., Danilevich Ya. D., Wind – power and small hydrogenerators designing problems. Proceedings of the IEEE Russia (Northwest Section). Int. Symp. “Distributed Generation Technology”, October 2003.Google Scholar
  12. 31.
    Shakaryan Yu.G., Electromachin-gates complexes in power engineering. Proceedings of the III-th Int. Symp. Interelectromach (IEM) “Electrical Machines in the New Century”. Moscow, 2000. (in Russian).Google Scholar
  13. 32.
    Journal “Modern Systems”. 2002. April. Page 23.Google Scholar
  14. 33.
    Kim K.K., Izotov A.M., Kolesov L.S., To the question of the use of solid lubricants in the moving current-collecting systems. Elektrotechnika, #3, 2000. (in Russian).Google Scholar
  15. 34.
    Zaboin V.N., Methodology for optimizing the parameters of the current-collecting systems of electrical machines. Electrichestvo, #1, 1999. (in Russian).Google Scholar

III. State Standards (IEС, GOST and so on)

  1. 35.
    GOST (Russian State Industrial Standard) R – 52776 (IEC 60034-1). Rotating Electrical Machines. (in Russian).Google Scholar

Copyright information

© Springer Japan KK 2017

Authors and Affiliations

  • Iliya Boguslawsky
    • 1
  • Nikolay Korovkin
    • 1
  • Masashi Hayakawa
    • 2
  1. 1.Peter the Great St. Petersburg Polytechnic UniversitySaint PetersburgRussia
  2. 2.The University of Electro-CommunicationsTokyoJapan

Personalised recommendations