Advertisement

Frequency-Controlled Induction Motors in Nonlinear Networks: Assessment Criteria of Higher Harmonics Influence—Method of Criteria Calculation

  • Iliya Boguslawsky
  • Nikolay Korovkin
  • Masashi Hayakawa
Chapter

Abstract

This chapter presents the criteria for evaluation of the level of their application with account of the harmonic composition of supply voltage, which have been elaborated and proposed for frequency-controlled asynchronous machines.

Keywords

Induction Motor Motor Power Frequency Converter Induction Machine Linear Network 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

References

I. Monographs, textbooks

  1. 1.
    Boguslawsky I.Z., A.C. motors and generators. The theory and investigation methods by their operation in networks with non linear elements. Monograph. TU St.Petersburg Edit., 2006. Vol. 1; Vol.2. (In Russian).Google Scholar
  2. 2.
    Richter R., Elektrische Maschinen. Berlin: Springer. Band I, 1924; Band II, 1930; Band III, 1932; Band IV, 1936; Band V, 1950. (In German).Google Scholar
  3. 3.
    Mueller G., Ponick B., Elektrische Maschinen. New York, John Wiley, 2009. 375 S. (In German).Google Scholar
  4. 4.
    Demirchyan K.S., Neyman L.R., Korovkin N.V., Theoretical Electrical Engineering. Moscow, St.Petersburg: Piter, 2009. Vol. 1, 2. (In Russian).Google Scholar
  5. 5.
    Kuepfmueller K., Kohn G., Theoretische Elektrotechnik und Elektronik. 15 Aufl. Berlin, New York: Springer. 2000. (In German).Google Scholar

II. Induction machines. Papers, inventor’s certificates

  1. 6.
    Boguslawsky I.Z., Research method of regimes of double feed supplied machine with taking into account saturation and higher harmonics. News of the Russian Academy of Sciences. Energetika (Power engineering), 2002, № 1. (In Russian).Google Scholar
  2. 7.
    Boguslawsky I.Z., Double power supplied asynchronous machine with converter in the rotor winding performance investigation method. Proceedings of the Int. Symp.UEES-01. Helsinki. 2001.Google Scholar
  3. 8.
    Boguslawsky I.Z., Danilevich Ja. D., Wind–power and small hydrogenerators designing problems. Proceedings of the IEEE Russia (Northwest Section). International Symposium “Distributed Generation Technology”, October 2003.Google Scholar
  4. 9.
    Boguslawsky I.Z., Danilevich Ya.B., Popov V.V., Features of the calculation of electromagnetic loads and the power factor of the rotor of asynchronized synchronous generator at different slips. Proceedings of the Russian Academy of Sciences. Energetika. #6, 2011. (In Russian).Google Scholar
  5. 10.
    Antonov V.V., Boguslawsky I.Z., Savelyeva M.G., Calculation of the characteristics of a powerful induction motor with non-linear parameters. – In the book.: Elektrosila, #35, 1984. (In Russian).Google Scholar
  6. 11.
    Boguslawsky I.Z., Parameters of an equivalent circuit of powerful induction motors at working in nonlinear networks. In book: Problems of creation and maintenance of new electrical power engineering equipment. Department of electrical power engineering problems of Russian Academy of Sciences. St.Petersburg, 2003. (In Russian).Google Scholar
  7. 12.
    Boguslawsky I.Z., Special features of the fields of induction machine with the asymmetrical cage rotor by non-sinusoidal power supply. Power Eng. (New York), 1990, № 2.Google Scholar
  8. 13.
    Oberretl K., Die Oberfeldtheorie des Kaefigmotors unter Beruecksichtigung der durch die Ankerrueckwirkung verursachten Statorstroeme und der parallelen Wicklungszweige. Archiv fuer Elektrotechnik, 1965, № 6.Google Scholar
  9. 14.
    Polujadoff M., General rotating MMF – Theory of squirred cage induction machines with non-uniform air gap and several non-sinusoidally distributed windings. Trans AIEE, PAS, 1982.Google Scholar
  10. 15.
    Vaš P., Analysis of space–harmonics effects in induction motors using N – phase theories. International Conference of Electrical Machines. Brussel, 1978.Google Scholar
  11. 16.
    Vaš P., Altalonositott, egyseges villamosgepelmelet fehlharmonikus jeensegek figyelembevetelere. Elektrotechnika (Hungary), 1980, №9. (In Hungarian).Google Scholar

III. Synchronous machines. Papers, inventor’s certificates, patents

  1. 17.
    Boguslawsky I.Z., Harmonic of an armature field and frequencies of currents of rotor contours multiphase salient-pole motor under nonsinusoidal feeding. In books: Problems of creation and maintenance of new electrical power engineering equipment. Department of electrical power engineering problems of Russian Academy of Sciences. St. Petersburg, 2003. (In Russian).Google Scholar
  2. 18.
    Boguslawsky I.Z., Bragin V.I, Danilevich J.B., Demirchjan K.S., Tsatskin A.J., Chernov A.N., The scientific and technical problems of powerful A.C. machines, caused by operation in nonlinear networks. In book.: Proceedings of III International symposium ELMACH − 2000. Moscow. 2000. (In Russian).Google Scholar
  3. 19.
    Boguslawsky I.Z., Kuss G., The level and criteria of estimation of electromagnetic load of A.C. motors in nonlinear networks. Elektrotechnika, 2003, № 10. (In Russian).Google Scholar
  4. 20.
    Boguslawsky I.Z., Magnetically coupled meshes in A.C. machines by non-sinusoidal power supply. Power Eng. (New York), 1995, № 2.Google Scholar
  5. 21.
    Boguslawsky I.Z., Equations system of poliphase A.C. machine by non-sinusoidal power supply. Power Eng. (New York), 1996, № 2.Google Scholar

IV. State Standards (IEС, GOST and so on)

  1. 22.
    GOST (Russian State Standard) R-52776 (IEC 60034-1). Rotating Electrical Machines. (In Russian).Google Scholar
  2. 23.
    IEC 60092-301 Electrical installations in ships. Part 301: Equipment Generators and Motors.Google Scholar
  3. 24.
    Rules and Regulations for the Classification of Ships. Part 6 Control, Electrical, Refrigeration and Fire. Lloyd’s Register of Shipping (London). 2003.Google Scholar
  4. 25.
    Russian Maritime Register of Shipping. Vol.2. Rules for the classification and construction of sea going ships. St.-Petersburg. 2003. (In Russian).Google Scholar
  5. 26.
    Rotated electrical machines. Turbogenerators. The general technical specifications. GOST 533-2000. Minsk (Belorussia). Interstate council on standardization, metrology and certification. (In Russian).Google Scholar

Copyright information

© Springer Japan KK 2017

Authors and Affiliations

  • Iliya Boguslawsky
    • 1
  • Nikolay Korovkin
    • 1
  • Masashi Hayakawa
    • 2
  1. 1.Peter the Great St. Petersburg Polytechnic UniversitySaint PetersburgRussia
  2. 2.The University of Electro-CommunicationsTokyoJapan

Personalised recommendations